Running throughput tests

[Ben Greear]

On 04/23/2014 11:44 PM, Kalle Valo wrote:
> Bart Jooris <bart.jooris at gmail.com> writes:
>
>> I also have a stable 500Mbps ++ link now :-) with peaks up to 520Mbps
>> (measured with iperf UDP).
>> I've  made a second AP and STA with the WLE900VX cards I've exchanged
>> with Ben (Thanks again!).
>
> Good!
>
>> p.s. The configuration with the sparkLAN WPEA-351AC cards still
>> doesn't give the same results. Probably my bad, I will double check it
>> again.
>
> This is CUS223 based design, right? If you see the problem still try to
> get debug logs. For example, debug_mask=0x432 might give some hints.
>

We tried with the Sparklan today, and it locks up the system soon after we
start hostapd, so we just removed it from the system.  The WLE900VX in same
machine and same config works fine.

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com