Running throughput tests

Kalle Valo kvalo at
Wed Apr 23 23:44:49 PDT 2014

Bart Jooris <bart.jooris at> writes:

> I also have a stable 500Mbps ++ link now :-) with peaks up to 520Mbps
> (measured with iperf UDP).
> I've  made a second AP and STA with the WLE900VX cards I've exchanged
> with Ben (Thanks again!).


> p.s. The configuration with the sparkLAN WPEA-351AC cards still
> doesn't give the same results. Probably my bad, I will double check it
> again.

This is CUS223 based design, right? If you see the problem still try to
get debug logs. For example, debug_mask=0x432 might give some hints.

Kalle Valo

More information about the ath10k mailing list