[PATCH v2] wireless-regdb: Update regulatory info for Cayman Islands (KY) for 2024

[Ping-Ke Shih]

From: Ping-Ke Shih <pkshih at realtek.com>

Utility Regulation and Competition Office, Cayman Islands, released
Operating Parameters for Wireless Data Transmission (including WiFi)
Services On 18th November 2024 [1].

Both FCC and EU reference are permitted. Adopt FCC reference.

* 2400 - 2483.5 MHz
  - Part 15.247
    * 1 Watt
      For systems using digital modulation in the 902 - 928 MHz,
      2400-2483.5 MHz, and 5725 - 5850 MHz bands: 1 Watt.

* 5150 - 5350 MHz
  - Part 15.407
    * 250 mW
      For client devices in the 5.15-5.25 GHz band, the maximum conducted
      output power over the frequency band of operation shall not exceed
      250 mW provided the maximum antenna gain does not exceed 6 dBi.
      In addition, the maximum power spectral density shall not exceed
      11 dBm in any 1 megahertz band.

      For the 5.25-5.35 GHz and 5.47-5.725 GHz bands, the maximum conducted
      output power over the frequency bands of operation shall not exceed
      the lesser of 250 mW or 11 dBm + 10 log B, where B is the 26 dB
      emission bandwidth in megahertz. In addition, the maximum power
      spectral density shall not exceed 11 dBm in any 1 megahertz band.
    * DFS: 5.25-5.35 GHz

* 5470 - 5725 MHz
  - Part 15.407
    * 250 mW
      For the 5.25-5.35 GHz and 5.47-5.725 GHz bands, the maximum conducted
      output power over the frequency bands of operation shall not exceed
      the lesser of 250 mW or 11 dBm + 10 log B, where B is the 26 dB
      emission bandwidth in megahertz. In addition, the maximum power
      spectral density shall not exceed 11 dBm in any 1 megahertz band.
    * DFS: 5.47-5.725 GHz

* 5725 - 5875
  - Part 15.407
    * 1 W
      For the band 5.725-5.85 GHz, the maximum conducted output power over
      the frequency band of operation shall not exceed 1 W.

* 5925 - 6425 MHz
  - Part 15.407 (but no description; reference [2])
    * -1 / MHz (12 dBm is adopted)
      Accordingly, the Commission concludes that the appropriate maximum
      power spectral density for low power indoor client devices in this
      band is 6 dB below the limit for access points (or -1 dBm/MHz based
      on the adopted PSD limit).
    * NO-OUTDOOR

* 57 - 71 GHz
  - Part 15.255 (but no power value; reference [3])
    * 40 dBm
      The average power of any emission shall not exceed 40 dBm and the
      peak power of any emission shall not exceed 43 dBm.

[1] https://www.ofreg.ky/viewPDF/documents/2024-11-19-16-28-50-OfReg-WiFi-Permitted-Parameters-V2.pdf
[2] https://www.federalregister.gov/documents/2020/05/26/2020-11236/unlicensed-use-of-the-6-ghz-band
[3] https://docs.fcc.gov/public/attachments/FCC-16-89A1.pdf

Signed-off-by: Ping-Ke Shih <pkshih at realtek.com>
---
v2:
  - extend "5470 - 5725" to "5470 - 5730" (+5MHz)
  - drop AUTO-BW from "5470 - 5725" and "5725 - 5875"
---
 db.txt | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/db.txt b/db.txt
index 4603324b4920..d56ad32d31c9 100644
--- a/db.txt
+++ b/db.txt
@@ -1069,12 +1069,15 @@ country KW: DFS-ETSI
 	(5470 - 5825 @ 160), (24), DFS
 	(5925 - 6425 @ 320), (200 mW), NO-OUTDOOR
 
+# Source: https://www.ofreg.ky/viewPDF/documents/2024-11-19-16-28-50-OfReg-WiFi-Permitted-Parameters-V2.pdf
 country KY: DFS-FCC
-	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (24), AUTO-BW
-	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
-	(5490 - 5730 @ 160), (24), DFS
-	(5735 - 5835 @ 80), (30)
+	(2400 - 2483.5 @ 40), (1000 mW)
+	(5150 - 5250 @ 80), (250 mW), AUTO-BW
+	(5250 - 5350 @ 80), (250 mW), DFS, AUTO-BW
+	(5470 - 5730 @ 160), (250 mW), DFS
+	(5725 - 5875 @ 80), (1000 mW)
+	(5925 - 6425 @ 320), (12), NO-OUTDOOR
+	(57000 - 71000 @ 2160), (40)
 
 # Source:
 # http://adilet.zan.kz/rus/docs/V1500010730
-- 
2.25.1