[PATCH v2 2/2] ramips: mt7621-dts: we420223-99: mux phy0->gmac1

[Arınç ÜNAL]

> This gives each port an individual link to the CPU, like in f1c9afd801
> (ramips: mt7621-dts: mux phy0/4 to gmac1, 2022-07-06).
> 
> The advantage of this is that it can now route packets faster between
> the ports (before the CPU only had a single 1Gb link to the switch that
> has to be shared between both ports. Another advantage is that in Linux
> 5.10 you can now bridge a VLAN to a non-vlan port. Without this patch,
> you're not getting any data across the bridge. That is fixed in Linux
> 5.15 but is still handled by the CPU in any case. So therefore this
> patch is advantageous in all cases except for when you need the device
> as a simple switch without VLANs. For that case it's better to revert
> this and the switch hardware will forward traffic without bothering
> the CPU.
> 
> Signed-off-by: Harm Berntsen <git at harmberntsen.nl>

You don't need to split this to another patch.

Arınç