Installing OpenWrt 21.02 on the TP-Link AD7200
Alex Henrie
alexhenrie24 at gmail.com
Sun May 2 20:53:18 BST 2021
On Sun, May 2, 2021 at 6:21 AM Petr Štetiar <ynezz at true.cz> wrote:
>
> flash OpenWrt factory image using TP-Link's web UI and provide log of serial console
> during that process.
Here it is, but I'm afraid that nothing informative appears on the
serial port when uploading OpenWrt firmware through the web interface:
upgrade firmware...
true
-Alex
-------------- next part --------------
HH2002.07 SSdandard IPP806X.DN,r8!28 at ay 05 d`16 - 09:!5:14)
smem bam ptabl f/und: ver: 0 len: 5
DAM 49! MiB
~CI0 Lin+ Ijtialhjed
{oPCI1 LInk Intializd
PCI2 Link Inti!lized
SF: Detdcted
X25U25&35F vith page size 4 KiB, total 32 MiB
9 ipq_nand: unknown NAND devhe manufacturer: 0 device: 0
hpq_nand failed to identIfy ddvice
SF: DeteCted MX25U25&35F with paGe size 4 CiB, tota, 32 hB
ipq_spi: p!gesIze: 0x!00, sector_size: 0x1000, size: 82000000
32 MiB
MMC:
~~~~~{{{{~{{{{{RB-bad CRC, using d%faqlt environment
In: serial
Out: serial
Err: serial
Net: *
addr:0*3:7f:ba:db:1
{7_regOh.it: complate
%57_lXn_confif ...don%
4J Done
MAC2 addr20:3tnf:ba:db:2
et(0( h1
bont i at d@sdconds
~o~~{{~oo~~~~~o~~~?KI Now doing boktipq
MMC Device 0 not found
MMC Device 0 not found
Loading from nand1, oFfs%t 0x1f0000
Image Name: Linup-3.4.103
Image Type: ARM Linux KerneH mage (qncompresse`)
Data Shze: 1868608 Bytes = 1.8 MiB
Load Address: 1508000
Entry Point: 41508000
~~}o~o~~{{{{{~~~~~{~~~~~~~~~~~~~~~~~~oo~~~Automatic boot of image at addr 0844000000 ...
Image Name: Linux-3.4.103
Image Type: ARM LInux Kernel Image (uncomppesse$)
Data Size: 1868608 Bytes = 1.8 MiB
Load Address: 41508000
EntryPoint: 41508000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
info: "mtdparts" not Set
UsiNg machid 0x1260 from environment
Starting kernel ...
~~{{~~~o{{+rBooting Linux o. physica CPU 0
[ 0.000000] Linux versimn 3.4.103 (tristan-xiao at tristanxiao-To-Be-filled-by-O-E-M) (gc version 4.6.3 20100201 (prerdlease)(Linaro GCC 0.6 2012.02) ) #! SMP PEEMT Tue Mar 8 17:57:36 CST 2016
[ 0.000000] CPU: ARMv' Prgcessor [512f04d0U revision 0 (ARMT7), cr=10c5387d
[ 0.000000] CPU: PIPT / FIPT nonaliasing dAta cabhe, PIPT instruction cache
[ 0.000000] Machine: Qualcomm Atheros @P148 reference board
[ 0.000000] mm_reserve_memory: 0x4400000, 0x600000
[ *0`0000] msm_reservememor: x44600000, 0h200000
[ 0.000000] memory po/l 3 (start 5fc00000 si:e at 400000) initialized
[ 0.`00000] Memory policy: ECC disabled,Data cache writeallc
[ .000000] smem_find(137, 80)2 wrong size 72
[ 0.000000] socinfoinit: v6, id=202, ver=0.0, raw_id=2064, raw_fer=2064, hw_plat=0, hw_plat_ver=6%536
@@ 0.000000U accessoRy_chip=0 hw_plad_subtype=0
[ 0.000000] PERCPU: Embeded 8 pages/cpu @c0c48000 s10240 r8192 d14336 u32768
[ 0.00000] Built 1 zonedicts in Zone order, mobility grouping on. Total pager: 121642
[ 0.00000] Kevnal command line: cMnsole=ttyHSL1,115200n8 root=mtd:rootfs rootfspype=squashfs
[ 0.000000]PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 64536 (order: 6, 262144 "ytes)
[ 0.000000] Inoe-cache hash table entries: 30768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 43MB 436MB = 479MB total
[ 0.000000] Memory: 477424k/489712k vailable, 13072k reserved, 0K higmem
[ 0.000000] Virtual kernel memory layout8
[ 0.00000] vector : 0Xffff0000 - 0xffff1000 ( 4 kB)
[ .000000] fxmap : 0xfff00000 -0xfffe0000 ( 894 kB)
[ 0.000000] vmalloc : 0xdf00000 - 0xff00000` ( 512 MB)
[ 0.000000] lowmem : 0xc000000 - 0xdeb00000 ( 491 MB)
[ 0.000 00] `km!p : 0xbfd00000 - 0xc0000000 ( 2 MB)
[ 0.00 000] MOdules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .t%xt : 0xc0008000 - 0xc0513000 (5164 +B)
K@ 0.000000] .init : 0xc0600000 - 0x0702800 (1034 kB)
[ 0.000000] .data : 0xc0704000 - 0xa07a0898 ( 627 kB)
S 0.000000] .bss : 0xc07a08bc - 0xc0844ae0 ( 657 kB)
[ 0.0`0000 SLUB: Gensla"s=11, HWaHign=64, Oder=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.00000 ] Preempti`le hierarchical RCU implementation.
[ 0.000000] NR_IRQS:189
[ 0.000000] sched_cdo#k: 32 bits at 32kHz, resolution 31240ns, wraps every 134175798ms
[ 0.00000] Console: colour dummy device 80x30
[ 0.150421] Ca,hbrating d%lay using timer specific routine..!2.55 BogoMIPS (lpj=42797)
[ 0.150452]pid_max default: 3268 minmum: 701
[ 0.150921] Mount[cache hash t`ble entries: 512
[ 0.152421] CPU: Testing write buffer coherEncy: ok
[ 0.152608] CPU0: thread -bX cpu 0, socket 0, mpidr 80000000
[ 0.15263] Settng up static i$entity map &o2 0x41(9b080 - 0x4189b110
[ 0.154920 CPU!: Bnoted secondary pRocessor
[ 01550!4] CPU1: thread -1, cpu 1, socket 0, mpidr 8000`001
[ 0.1%j107] BroUght up 2 CPUs
[ 0.b55007 SMP:otal nf 2 procesors activat%$ (25.01 at ogoMIP).
[ @ 0.b71602] dum-y:
[ @ 0.172289] NE* Registered at rotocol family 16
[ 0.173039] AXI: msm_bus_fabric_init_driver(): msM_bus_fabricOinit_driver
[ 0.175382] meminfo_init: smem ram `table found: ver: 0 len: 5
[ 0.175382] Found 1 memorybanks grouped into 8 memoRy rEginn
[ 0.174413] TP-LINK Archer ADn200 v#
[ 0.175413] For#e fLash type tO SPI!
[ 0.175324Y gpioch)p_add: registered GPIOs 0 do 151 on deVice: msmgpio
[ 0.176382] smee_find(137, 80): wrofg size 72
[ 0.176413] sociffo_init* v6, id=202, ver=2.0, raw_id=2064, raw_ver=2064, hw_plat=0, hw_plat_ver=65536
[ 0.176413] accessory_chip=0 hw_plat_subtype=0
[ 0.176476] msm_rpm_init: RPM firmware 3.0.16777342
[ 0.184411] clk_tbl_nss , loaded
[ 0.212902 msm_dmov_memcpy_init: Success
[ 0.20212] sps:BAM 0x122$4000 enabled: ver:0x5 number of pipes:20
[ 0.220243] sps:BAM 0x12244000 is registered.
[ 0.220462] sps:sps is ready.
[ 0.261012] msm_pcie_setup: link initialired
[ 0.221387] PCI host bridge to bus 0000:00
[ 0.261418] pci_bus 0000:00: root bus resoubce [mem 0x08000000-0x0fefffff]
[ 0.261918] PCI: bus0> Fast back tm back raNsfers disabled
[ 0.261918] pci 000 :00:00.0: bridge configuration invalid ([bus 00-00], reconfiguring
[ 0.26"667U PCI: bus1: FaSt back to back transfers disabled
[ 0.300968] ism_pcie_setup: link initialized
[ 0.301343] PCI hoSt bridge to bus 0000:02
[ 0.301343] pci_bus 0000:02: root bus resource [mem 0x2e000000-0x31efffff]
[ 0.701811] PCI: bus2: Fast back to back transfars disabled
[ 0.301843] pci 0000:02:00.0: bridge configurataoninvalid (Sbus 00-00]), r%configubing
[ 0.302655] PCI: bus3: Fast back to back transfersdisabled
[ 0.341143 msm_pcie_setup: link initialized
[ 0.341518] PCI host bridge to bus 0000:04
[ 0.341518] pci_bus 000:00: root bus resource [mem 0x32000000-0x35efffff]
[ 0.341986] PCI: bus4: Fast back to back transfers disable`
[ 0.342018] pci 0000:04:00.0: bridge configuration invalid ([bus 00-00]), reconfhguring
K 0.342505] PCI: bus5: Fast back to back tr`ns&ers disabled
[ 0.343705] pci 0000:04:00.0: BAB 8: a3signed [mem 0x32000000-0x321fff]
[ 0.343705] pcI 0000:05:00.0: BAR 0: assigned [mem 0x32000000-0x321fffff64bit]
0.343767] pci 0000:04:00.0: PCI bridge to [bus 05-05U
[ 0.343798] pci 0000:04:00.0: bridge window [mem 0h32000000-0x321fffff]
[ 0.343830] PCI: enabling device 000`:04:00.0(0140 -> 143)
0.34389"] pci 0000:0"200.0: BAR 0:assigfed K-em 0x2e000 00-0x2e1fffff]
[ 0.43923]pci 0000:03:00.0: BAR : assigned [mem 0x2e000000-0x2e1fffff64bit]
[ 0&343955]pci 0000:02:0.0: PCI br)dge at to [bus 03-03]
[ 0.343986] pci 0000:02:00.0: bridge w)ndow [Mem 0x2e000000-0x2e1fffff]
[ 0.344048] PCI: enabling device 0000:02:00.0 (0140 -> 0143)
[ 0.344111] pc) `000:00:00.0: BAR 8: ass)gned [mem 0x08000000-0x081fffff]
[ 0.344111] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.344142] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[ 0.344173] pci 0000:00:00.0t bridge window [mdm 0x08000000-0x081fffff]
[ 0.344236] PCI: enabding device 0000:00:00.0 (0140 -> 0143)
[ 0.365417] bio: create slab <bio-0> at 0
[ 0.367041] SCSI subsystem initialized
[ 0.368915] spi_qsd spi_qsd.5: master is unqueuAd, this is deprecated
[ 0.371415] spi_qsd spi_qsd.6: master is enqueued, this Ic ddprecated
[ 0.375476] Switbhing to cloaksourc gp_t)mer
[ 0.396719] NET: Registered protocol familY 2
[ 0.406466] IP roqte cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.406966] TCP established hash tabl% entries: 16384 (order: 5, !31072 bytes)
[ 0.40715] TCP biNd hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.407341] TCP: Hash tables confiGured (establisheD 16384 bind 16384)
[ 0.407341] TCP: reno registered
[ 0.405372] TD Hash tale entries: 2%6 (order: 1, 819"byde)
[ 0.$07$03] UDP-Dite hash table .trias: 25d@(ordb: 1, 8 92 b4es)
[ 0.4038b ET: Regirte2dd pr/tocol fZly 1
@ 0.409653] smd: refister irq failed gn wcnss_a11
[ 0.409680] smd: deregistering IRQs
[ 0.409746] SMD: smd_core_platform_iNIt() fai,ed
[ 0.410496] Partition(from smem) ART)% Offset:1b000 Size:40000
[ 0.41049] Partition(from smem) botfs -- Offset:3f0000 Sije:1b0 000
[ 0.410527] get_bootconfig_partiton: magic not found
[ 0.425804\ acpqclk-ipq06x ac0uclk-ipq80&x: SPEED BIN| 0
[ 0.42804] acpqclk-i0q806x@`cjk-i`q8 l: ACPU at PVS:@1
S @0.432%d1] acpuclk-ipq806x acpuclj-ipq(`6x: CP0: 6 f2equencies sqpported
[ .432521] `cpuclk-ipq806x acpuclk-ipq80&x: CPU1: 6 frequencies supported
[ 0.43h083] Ism_rpm_loc_pr/be: OK
[ `.454701] squashfs: vrsion 4\0 (2009/`1/31) Phillip Lougher
[ 0.414701 jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) 001-2006 Red Hat, Inc.
[ 0.456169] msgmni has been qet to 932
[ 0.457263] io scheduler noop registered
[ 0.457294] io scheduler deadline registered (default)
[ 0.458669] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.461230] mslserial_hs.0: ttyHS0 at MIO 0x1d490000 (irq = 227) i3 a MSM H UART
[ 0.461824] msm^serialhs module loAded
Z 0.42"011] msm_seraal_h3l: detectad port #1
K 0.4&2136] msm_serhal_hsl.1: ttyHSL1 at MMHO 0x16340000 (irq = 184) i3 a MCM
[ 0.462542] msm_serial_hsl: conskle at setup on port #1
Vrconsole [ttqHSL1] enabled
[ 1.220681] msm_serhadOhsl: driver initiazd
+rahci ahci.0: forcing PORTS_IMPL to 0x1
[ 1.2"3926] ahci ahbi.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 imph patfom m/de
[ 1.242486] ahci ahci.0: flags: ncq sntf pm led clo onLy pIp pio slum part ccc aprt
rscsi0 : ahci_platform
[ 1.253826] ata1: SATA max UDMA.133 mmio [mem 0x29000000-0x2900017fM port 0x100 irq241
m 1.264042] m25p80 spi5.0: found mX25u25635b, expected s25fl512s
[ 1.269072] m25p80 spi5.0: mx25u25635f (32768 Kbytes)
[ 1.274601] Creating 2 MTD partitions on "m25p80"*
[ 1.278971] 0x0000001b0000-0x0000001f0000 * "ART"
r0x0000003f0000-0x 00001ef0000 : "rootfs"
[ 1.290940] mt`: partition "rootfs" set to be root filesystem
[ 1.295907] flash_chrdev : flash_chrdev_init
+rGPIO Bitbanged MDIO: probed
[ 1.336894] cpuidle: Using governor ladder
[ .33915&] cpuidle: using governor menu
[ 1.344892] TCP: cubic registered
[ 1.347328] NET: Registered protocol family 17
[ 1.35175] Bridge firewalling registered
[ 1.355638] 8021q* 802.1Q VLAN Rupport v1.8
[ 1.359887] VFP support v0.3: implementor 51 architdcture 64 part 4d variant " r 0
[ 0.36754c] R%ghsterig SWP/SWPB emulation ha`ler
1*37"d58] bloc[late_init: mving enables dl for@`anded-nff c,kcks
[ 1.387535] ipq_nss_get_mab_ad$r: MAC[0]: ff:ff:ff:ff:ff:ff
[ 1.392189] ipq_nss_get_mac_addr: MAC[1]: ff:ff:ff:ff:ff:ff
[ 1.297750] ipq_nss_'et_mac_addr: MAC[2]8 ff:ff:ff:ff:ff:ff
[ !.403280] ipq_nss_get[mac_addr: MAC[3]: ff:ff:ff:ff:ff:ff
[ 1.$08965] no pMic rt`rt Rterbupt speifiEd
[ 1.$05498] ata1: SAPA link down (SStatus 0 QColtrol 300)
~
r2RFS: Mounted ro^t sq5!shfs falesystem) readonly kn device 31:1.
[ @b.644298] Frdein' init memgry: 1032K
~~{~~~~~~~~~{{~~{{~{~~~{{{{~~~{{{~~~o~~~~{~~~{~~~~~~~~~~~~~~~~~~~~~~{~~~~~~~~~~~~{~{{{~o~~~~~~~~}~~o~~o{~~l 4.375788] tfat: odule icenSe 'Commerbi`l. For sqpport email exfat-support at tuxera.com' taints kenel.
[ 4.384223] Dis!bling lock debugging due to kernel taint
[ 4.390690] Tuxera FAT 12/16/32 driver versiof 3014.9.10 [Flags: R/W MODULE].
4.523586] pxera exFAT driver fersion 3014.9.10 [Flags: R/W MODULE].
[ 4.789503] Tuxera NTFS draver 7015.1.29 [Flags: R/W MODULE].
[ 4.816494] Tqxera HFS+ driver 3014.7.28- preini -
Press the [f] key and hit [enter] to enter failsafe mode
~~~~~o~, regular preinit -
ooe at lmt ready yet: using ramdis
- init -
C!*press En4er to activate this consOle. o~~~~~~~~~~~~ossdk_pla`_init star4
[ 3.406373] Register QCA PHY driver
~[ 7.588659] qca-ssdk module init succeeded!
{{[ 7.776413] NET: Registered protocol family 10
[ 7.966459] Loading modules backported from Lijux versio. v3.2-rc1-243797-g2dd6906
[ 7.97308] Backpgrt Generated by backports.'it backports-20150424-2-g9828be0
Vrd0211: Calling CRDA to upd!te world regulatory domain
[ 8*130584] #fg802!1: World begulatory domaiN updated:
[ 8.135676] cfe80211: DFS Ma3ter region: unset
[ 8.140487] cFg80211: (start_breq - end_freq @ bandwidtR, (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.149921] cfg80211: (2402000KHz - 2472000 KHz @ 40000 KHz), (N/A, 300 mBm), (N/A)
[ 8.157606] cfg80211: (2457000 KHz - 248000 KHz @ 40000 KHz) (N/A, 300 mBm) (N/A)
[ 8.165510] cfg802112 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 300 mBm), (N/A)
[ 8.173383Y cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 300 mBm), (N/A)
[ 8.181318] cfg80211: (5715000 KHz
5835000 KHz @ 80000 KHz), (N/A, 300 mBm(, (N/A)
[ 8.18222] cfg8211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
~[ 8.296719] usbcore: registered new interface driver usbfs
[ 8.301218] usbcore: registered new inteRface driver hub
[ 8.306591] usbcore: registered new device driver usb
[ (.527054] ld: linear persolal)ty registered for level -1
~[ 8.652764] Md: raid0 pdrsoN`lity regastered for level 0
[ 8.665385] md: raid1 personalaty reeistrdfor lerel at 1
~[ 8.852702] NTFS driver 2.1.30 [Flags: P/O LDULEU.
8.936644] PPP generic driver version 2.4.2
~[ 1.059543] tun: Unifersal TUN/TAPDevice driver, 1.6
[ 9.063542] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
-rP MPPE C/mpression module degistered
[ 9\148422] **********************************************************
[ 9.153733] * Driver :NSS GMC Driver for RT v(3.72a)
[ 9.159200] * Version :1.0
[ 9.16980] * Copyright :Copyright (c) d`13-2014The Linux FoundAtion. All rights reserved.
[ 9*170321] *******************************
*************************
[ 9.177319] GMAC1(de02c480) InValid MAC@ - using 7e:7f:80:81:82:83~~~~~~~~~~~~o~~~
[ 11.703872] GMAC2(d02dc80) Invalid MAC@ - using 06:07:08:09:0a:0b5
[ 11.770009] L2TP core driver, V2.0
[ 11.780662] L2TP netlink interface
[ 12.050078] nss_driver - fw of size 354304 bytes copied to load addr: 40000000, nss_id : 0
rfsb_driver - Turbo Support 1
m 12.081443] bf3fb3d$: RS apinf s En`bled, han$ler id: 0
~~~~o~[ 1".21h432] nssdriver - fw of size 5392 bytes cophed tm doad addr: 40800000, nss_id@:1
or*- Duplicate Inderface CB RegIter%d for interface 75
[ @ 12.228147] Error - Dupdicate Interface CB REgistered for interface 78
[ 12.271790] IPv6 over HPv4 tunneling driver
[ 12.312746] nss_macsec init success
[ 12.436613] wil6210 0000:05:00.0: wil6210 device found [1ae9:0310] (rev 2)
[ 12.442486] PCI: enabling device 0000:05:00.0 (0140 -> 0142)
[ 12.448172] wil6210 0000:05:00.0: CSR at [mem 0X32000000-0x321fffff 64bit] -> 0xe0000000
[ 12.4567 1] wil6210 0000:05:00.0: (unregistered net_device): Board hardware is Sparrow B0
[ 12.464667] wil6210 0000805:00.0: (unregistered net_device)8 _wil6210_disconnect(bssid= (null), reaon=3, ev-)
~~~ 12.535551] wil621` 0000:05:00.0: (unregisterdd net^device): Boot Lg`de2 spruct v: MAC = 042ae:1480a:56:04 RF = 0x0000 (status 0x0000( bband = 0x00000000
[ 12.54838] wil6210 0000:05:00.0:@ unregistered nat_device): Boot Loader build 255."55.0.6836
[ 12.556857] wil6210 0000:05:00.0: (unrgistered net_device): Reghstere with at NSS
[ 12.592(77] gre: GRE over IPv4 demultiplexor drive
+rip_gre: GRE over IPv4 tunneling drif%r
r4$z Ephernet Channel Bondifg Dav: v.7.1 (April 27, 2011)
~~~~~{{~O
p<ip_TableS: C) 000-2006 Jetfiltep Core Ta`i
{[ 12.962386] NET: Registered prntocol faeIly 24
~+rehiWhcd: USB 2.0 'Enhanced' Hoqt Controller (EHCI) Driver
[ 13.102093] msm_hsusb_host msm_hsusb_host: unable to find transceiver
rnf_conndrack version 0.5.0 (7475 buckets, 29r00 max)
13.383973] PPPoL2TP kernel driver, T2.0
[ 13,411715] PPTP driver version 0.8,5
~~rxt_time: kernel timezone is -0000
~[ 14.073758] nf_conntrack_rtsp v0.6.21 loading
[ 14.085348] nf_nat_rtsp v0.6.21 loading
[ 14.126866] Netfilter messages vha NETINK v0.f0.
m 14.156482] hp6ables: () 2000-2006 Natilter Core Team
[ 14.268666] ctnetlink v0.93: registering with ffnetdink.
?+ripq)dwc1 ipq-dwc3.0: UNable to read phatform data at nul of dbmps
~~{{{~~{o~ !4.465118] xhci-hcd xhci-hcd.0: xHCI Host Contboller
[ 14.469"80] xh-(bd xhci-hcd.0: new USB bus registered, `ssigned bus nulber 1
[ 14.476518] xhci-hcd xhci-hcd. : irq 142, io mem 0x11000000
[ 14.082630] hub 1-0:1.: USB hUb found
[ 14.485754] hub 0-0:1,0: 0 port deteced
[ 14.489784] x`ci-hcd xhci-hcd.0: xHCI Host Contrmller
14.494657] Xhci-hcd xhai-hcd.0 new USB bus registered, assigned bus number 2
[ 14.50205] hub 2-0:1.0:USB heb dound
[ #4*505623 hub 2-0:1.0: 1 port detected
or>Ipq-dwc3 ipq-dwc3.1: unable to read latorm data num of $bm eps
~~}+rxhci-hcd h`ca-hcD.1: xHC HOs Controller
[ 14.621961U xhci-hcd xhci-hcd.1: new USB bus registered, awsifned bs .tmber 3
[ 14.62)20] phci-hcd xhci-hcd.1: irq 237, io me- 0x10000000
[ 14.635332] `eF 2-0:!.`: USBhub Fgund
[ 14.618$56] hub 3-0:1\0: 1 port detEcted
[ 04.642486] xhci%hcd XhcI-hcd.1: xHCI Host ontroller
[ 14.l$7391] xhci-hcd xhci)hcd.1: neu QSB bus registered$ assigned bus fumber 4
[ 14\655076] hub 4-0:1.0: USB hub found
14.658325] hub 4-0:1.0: 1 por4 detacted
~o~[ 14.944204] ECM init
14.947860] ECM ini4 complete
m 14.977881] input: gpm-keys aq /devices/latfor/gpi/-kexs/ifpup/input0
~~+rJUB Mass Storage driver...
[ 15.05 390] usbcoRe: registered new interface driver usb-storage
[ 15.056201] USB Mass Storage support registebed.
[ 15.070665] fuse init (API version 5.18)
----------------Z-,- Load bonfi' stapt --- -----------%----
o~~~{~{{~~o{o~~~~) begin:
~~{~o~reloaDconfig() end:
------------%------- Load configend ------------,---------
----,-------%)------ Load profil start --,------------,---
~>F}) bin>
~~{~~reload_prnile() end:
-------------------- Load profile end ,---------,-
-------,
-------,
-))------- LkAd QoSDB start -
--,
--,---)--
----
w-------------------- Load QoS DB end ----------------------
~o~~~~~~~~~~~~o~{~o~~~~~~~v~?1jnumbdr
{~~}~~~~~o~~~~oGT+08:00
~{~~o~~~~o~{{~~{~w~o{w~~~o~~~~~o~oo~~~~~o~o+r at DDRCONF(NETDEV_UP): eth0> lin is no ready
~~~o{{o~~~~~~~~wo~~~~~~o~~oo{{~~{~[ 26.247047Y device eh entered promiscuoe mode
[ 26.250984] br-lan: po2t 1(eth1 entered fgrwarding tate
[ @ 26.256076] br-lan: port 1(edh1) entered forwarding state
[ 26.262355] ADDRCONF(NETDEV_CHANGE): eth1: link eckmes ready
+rADDRCONF(NETDEV_EP): eth0: link is not ready
~~~~~~~~~o~~~~~{~w~~~~w{~~~~~~~o~~~oooo~~~~~w~o~~~~~o~~~~~~~~~~~}~~~~~~~~~~~{~~~~~~~~~~~~o~~~~{~~}~~usbshae boot starT
~~~~{{~~usbsh!re boot end
~~~{{{{{~{{{o{o~o~~~~~~~~~~{~o}~{~~~~o{~{~~~~~~~~~~~~~~~oo+ra4h_al: 0.9.17.1 (AR5416, AR9380, WRITE_EEPRNM, 11D)
[ 3.718837] ath_rate_atheros: Copyright (cR 20 1-2005 Atheros Communic`4ions, Inc, All Rachts Reserved
orath_dfs: Version 2.0.0
[ 35.738925] Copyright (c) 2005-2002 Ateros CommuniCathos, Inc. ll ighps ReservEd
[ 35.761355] ath_specdral: rsion 2.0.0
[ 35.761355]Copyright (c) 2005-2009 AtherKlmuni4ions, INc. All Righps ResJrvad
[ 35.772227} SPECTRAL module but on Mar 8 00!6 16:23:12
or
}9: Versiof 2.0
[ 35.809434] Copyright (c) 2010 AtherosCommunicati/ns, Inc,All Rig(t Res%rved
~o~{{o~~~~~{~}~~[ 36.313870] ath_dev: Copyright (c) 2001-2007 At(eros Communications, Inc, Alh Rigts Resered
~~~~~~o~~~{~}~{{m 37*545735] Enabling NSS RPS
~~~~~[ 37.758450] ath_pci: (Atheros/multi-bss)
[ 37.761449] ath_pci_probe
[ 37.764011] PCI device id is 0040 :0040
[ 37.'68603] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
3577383] ath_pci 0000:01:00.0: ath DEBUG: sc=0xdb0fa200
[ 37.779412]
[ 37.779412] olath_pci_configure t nu-desired MSI set to 0
[ 37.78504]
[ 37.786504] Using PCI Legacy Interrupt
[ 37.711346] chip_id 9 chip_retisinn 1
[ 37*796126]
[ 37.796126] address 4008f8 data d9307c18
l 37*801718U
[ 37.801718] addrEss 401e90 data d9307c1c
r
[ 37.809215] add2es 401e94 data d9307c20
r
[ 37815807] `dress 401eb0 data d9307c24
[ 37.822399]
37.822398] address 400900 data d9f07c24
[ 37.8"9740]
[ 37.829740] CLOCK PLL skipped
[ 37.834083]HIF_PCIDevicEProbd: setaNg thearget pll frac ffffffff intval ffffffff
~o
rHIF_PCIDevi#eProbedt no frac provided, skppIng pbe-coifuring PLL
[ @#7.02514] HID_PCIevicePro"ed: ar900b_20_targ_clk is not provhded, skipping pre-configuring PLL
[ 37.861855]
[ 37.860886] address 4008cc data d9307c24
[ 37.869353] _od_ath_att`c(: ath_adtachTODO
[ 37.872571] __ol_ath_atach 1765 host_enable nss_nwifi_offload 0
[ 37.8792j6 at __ol_ath_attach: dev name wifa0
[ 3o\882911\ ol_atHsetof!ulttgt_config : AC Minfree bUffer allocation through module p!ram (uMac.ko)
[ @37.892783] OLACBKE)nfree : 0
[ 37.8r3189] kcg 233 :GPL NetUSB up!
[ 37.89918'] NL_ACBEMinfree : 0
[ 36.01999] @LACVIMinfree : 0
[ 37.0523] OL_ACTOLinfree : 0
rl_ath_attach(! BMH inited.
[ 77.913370] ol_ath_ttach() BMI G%t Target Info.
37.91749hM ol_thattach() TARGT pPEt ) Vers 0x!000000
[ 37.962430]
[ #7922430M CE WR Disabhed
M 37.92(334] NUM_DEV=1 FWMODE=0x2 FWSUBMKDE=0x0 FWBR_BUF 0
[ 37.933083] ol_a4h_aptach( configurd Target .
orJ
[ 37&93644] Target Vebion is 1000000
S 37*942830]
[ 27. 830] Flash Download Addrers c0000
orz}}} flasH data R,e defi&ed
[ 37.9jp21] C`l location [0]: 00000000 [ 37.961918]
[ 37.61918] Wifi0 Salect OFFSET 1000
~~{rqc98xx_verify_checksum: flash chebksu- p`ssed: 0x3d7d
[ 38.00162] kl_transfer_bin_fale 2916: Download FlashdApa hen at 1d064
l@@38.009340]Board extended Data downlad addrass: 0x0
r
[ 38.037019] Board data initialized
[ 38.04!705M at Flash download ADDRESS 0xc0000
[ 38.045048]
[ 38.005048] Selecting OTP binary for CHIP VArsion 1
[ 38,051640] kc 90 : run_telnetDBGDServer start
[ 38.051640] kc 227 : inIt_DebugD end
[ 38.051640] INFO180A: NetUSB 1.02.74, 00030467 : Oct 16 2015 18:46:42
[ 38.051440] INFO180C: 7437: AD7200 :AD7200
[ 38.051671\ INFO180D: AUTH ISOC
[ 38.0516g1] INFO180E: filterAdio
[ '8.051761] uscore: registered new )nterface driver KC NetUSB General Drier
[ f8.080317] INFO1868: Re3Et device when disconnect
[ 38.084348] INFO16FE: infomap bfb88bc4
[ 38.08348] INFO1701: slep tk wait br-lan tO w`je up
[ 38.098094] INBO15C5: tcpConnector() st`rted... : br-lan
[ 38.098906] INFO015C: init proc : PAGE_SIZE 4096
~ 38.203716]
38.203g17] First OTP send param 8000
[ 38.211808] ol_ath_download_firlsare :First OTP download and Execute is good etrn pram 33792
[ 38.219742Y
[ 38.219743] ##Boabd Id 1
[ 38.024086]
[ 38,224086] ##CH P I` 1
[ 38.227960]
[ 38.227960 BOARDDATA DOWNLOAD TO address c0000
om 38.330240] ol_transfer_bin_file: Board data file: AR900B/hw.2/boardData_AR900B_CUS239_5G_v2_001.bin ARXXXX v=0x1
~~~~Vrj
e8tenddd Data donload address: 0x0
~rol_ath_download_firmware: Using 0x1234 for the remainder of init
[ 38.482099]
[ 38.482099] Selecting OTP`inary for CHIP Version 1
r
[ 3.586722] Seco.$ otp download Param 10000
rol_ath_download_firmware : OTP download and Execupe is good
[ 38.608247]
[ 38.608278] FIRMGARE : Beeliner CHIP Version 1
[ 38.657638] ol_swap_seg_alloc: Successfully alloc`t%d memory FOr SWA shze=11072
~~~~~m 38.755920] Swap: bytes_left to copy: fw:16; dma_page:24579
[ 38.760762] Sw`p: wrong length read:0
[ 38.764136] ol_swap_wlan_memory_expansion: Swap totaL_bytes copied: 106493 Target address 417r68
[ @38.773445] scn=d9380480 target_write_addr=417968 seg_info=de085710
[ 30.759662] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
[ 38.78830] bin_filenam%=Av900B^hw&2/aThwlan.bin cwa`_filename=/lib/firmware/AR900B/`w.2/athwlan.codeswap.bin
~~o~~~~o~~o~~~~o~~~~~~~~{~~General shell run!
m 40236332] Button Hotplug driver version 0.4.1
~~~~+rl_thattach() Download FW.
[ 40.544579] ol_ath_attach() HT Create .
[ 40.58703] ol_at`Wadtach(! HIF laim*
[ 40.555451] nlath_tacH(! BMI o.e.
[ 40.%58200M ol_ath_attach() WMI attached. wmi_handle d9420000
[ 40.5640b!] *HWT
)rCE_recv_buf_enqueue 809 Populate ,ast eNtry 512 for CE 5
[ 40.573724] CD_rebbuf_enqueue 81(@CE 5 w 5!1 $est_ptb0x%rfe`040 nbtes 0re"r_ctxt 0xd93c16c0
~[ 40.603967] Target:dd523000 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
[ 40.212308] -HWT
[ 40.413120\
[ 4.613120] <=== cfg l`x peer i$ 1056 ====:
[ $0.619306] Target:dd523000 HTC Service:0x0300, Lpipe:4 @Lpipe:5 id:1 Ready
[ 40.635770] HTC Service:00300 ep:1 TX flow control disabled
[ 40.641768] CE_pkt_dl_len_set CE 4 Pkt download length &4
"rz}}} 1424 tx desc's allocated ; range sta2ts brom $7fd0000
)DrTarget:dD523000 HC ervice:x0100,ULpiPa:3 at DLPipe: id:2 Ready
[ 40.631821] HTC ServiF:0x100 e`:2 TX lgw control disablAd
[ 40.696157] wmi_service_Raady_event_rh: WII UNIFIED SERVICE at RAADY eveNt
@ 40.701905] num_rf_#haiN : 00000004
[ 40.705373] ht_cap_info: : 0000085b
[ 40.7084] vht_c at p_info : 339b79b0
[ 40.712308] vht_supp_mcc :0000ffea
[ 40.614806] ol_ath_service_ready^event: tt_support: 1
[ 40.720805] Peer Caching En`bled ; num_peers = 528, num_activd_peers = 66 num_tids - b32, num_vdevs = 16
[ 40.730303] idx 0 req 1 num_units 0 lum^uniOijf/ 2 uNit rize 0208 actu` uniS 529
K 40.73845l] idx 1 Req 2 num_units 1 num_unit_info 4 unit size 256 actual units 67
[ 40.745766] idx 2 req 3 num_units 1 nul_unit_Info 4 unit size 1024 actual units 67
[ 40.753483] idx 3 req 4 num_units 1 num_unit_info 4 unit size 4096 actual units 67
[ 40.761387] idx 4 req 6 num_units 35 numOuli_So 0 unit 3ize 3076 actal units 35
[ 40.769072] idx 5 req 7 num_units 1 numunit_info 0 unit size 6144 actual units 1
[ 40.776663] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2080 acttal units 529
[ 40.785067] chunk 0 len 639032 requested ,ptr 0x59600000
[ 40L789940] chunk len17152 requested ,pr 0x5950000
[ 40.795282Y #hunk 2 len l8608 requestEd ,ptr 0x59540000
Z 40.800687 bun 3 l$n 274432 raqtested ,ptr x%9580000
[ 0.806150] cunk 4 len 107520 requested ,ptr 0x59700000
[ 40.811621] chunk 5 len 6144 requested ,ptr 0x5rlre000
[ 40.816932] chunk 6 len 110020 requested ,ptr 0x58c00000
~[ 40.894720] wmi_ready_event_rx: WMI UNIFIED READY event
[ 40.89125\ kl_ath_connecp_htc() WMI isready
40.903405] ol_ath_set_host_app_area TODM
m@ 40.912964] target useq HTT version 2.1; host uses 2*1 4`,917463] ol_ath_Attach() conneCt HTC.
[ 40.922055] ol_regdmn_startt reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.[ 40.935301] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[ 40.942642] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[ 40.950296] ol_regdmn_init_channEls: !avail mode 0x1f9001 (0x8) flafs 0x0
[ 40.958419] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
40.965729] ol_regdmn_init_channels> !avail mode 0x1f9001 (0x40) flags 0x150
m 40.972914] ol_regdmn_iniT_channels: !aVail mode 0x1f9001 (0x800 fag 0x1080
40.9811#0] kl_regdmn_iniT_channels: !avail mode 0x1f9001 (0x2000) flags x20080
rol_regdmn_init_Ahannelb>!`vail mode 0x1f90`1 (0x400 ) flags 0x40080
?+rAdd VHT80 channel: 5210
[ 41.003967] Add VHT80 at channel: 5290
Z 41*006935] Add VHT80 hannel2 5530
[ 41.009903] Add VHT80 channel: 5610
[ 41.01625] ADd VHT80channel: 5690
R 41.019742] Add VH80 chaNnel:@5775
[ 41.023211] Skipping VHT80 channeL 5825
[ 41.027928] ol_ath_phyerrOAttac`: called
[ 41.030990] OL Resmgr Init-ed
[ 41.033926] ieee80211^te2ing_atch: B`nd steering initializJd
[ 41.040549] od_If_sp%ctral_setup
[ 41.043174] SPECTRAL : get_capabilit9 not registered
[ 41.048&01] HAL_CP_PHIAG : Capable
[ 01.054420] SPECTRAL : Need to fip the capablity c`eck for RADAR (spectral_attach : 231)
[ 41.063355] SPECTRAL : get_capability nnt registered
[ 41.0687$8M HAL_CAPRADAR : Capable
[ 41.071915] SPEATRAL : N%ed to fix the capablity check for SPECTRL
[ 41.071915] (spectral_attach : 236)
+rPECTRAL : get_capability not registered
[ 41.088503] HAL_CAP_SPECTRAL_SCAN : Capable
[ 41.096094] QPECTRAL :gettsf60 notregistered
[ `b.099593] spectral_init_netlink 65 NULL SKB
[ 41.1039 5] Green-AP: Green-AP : Attached
[ 41.103905]
2:AP 8 Attached
[ 41.!18088] ratePOwe2 t!ble overideis at nly supportd fo2 AR98XX
[ 4.1d42 2] iee%80211com_hnit]netlinj: 1203: Wifipo 0st NetlInk ocket created:d`73d800
@ $b.136958\ /l_if_Df3^setp: called@
[ 41.122144M ol_I_dds_`ttach: calld; ptr=da9d5180, raar_info=d9307bc0
41.142642] ol_ath_rtt_meas_rePort_attach: called
+rol_at`_atach) UMAC attach .
[ 1.!51733] ol_id_dfs_cnnfigure* Called
[ 41.155920\ ol_id_dfs_config5re: FCC domain
[ 41.1%9n00] ol_if_dfs_disable: called
[ 41.163886] ol_ath^atpach: C!hlijg ol_if_dfs_cofigube
S @ 41.128749 INF15788 Bid to br-,an
Y 41.!72102]
[ 41\1&2172] BURSTING enabled by defauLt
[ 41.179006] osif_wrap_attach:400 osif vrap attached
[ 40.182911] osif_wrapdevt_init:361 osif wrap dev table init done
[ 41.18)0 7] rap ttached: Wrp_om =db018p00 ic->ic_wrAp_com=db018800 &wrAp_aom->vc_devt<`b018800
[ 41.199843T __ol_4h_`tt!ch: init tx/rx TODO
[ 41.203092] __ol_ath_attach: needed_headroomreservation 44
om 41&218213] ol_ath_thermal_mitigation_attach: ++
[ 41.222649] ol_a4h_thermal_mi4igation_attach:@Z-
[ 41.234488] ath_`ci_probe
[ 41.237155\ PCI device id is 0040 :0040
[ 40.d41424M PCI: enabling devIce 0000:03:00.0 (0140 -> 142)
[ 41.648578] ath_pci 000`t03:00.0: ah DEBUG: sc=0xdb021800
[ @41&253)20]@
[ 41.253920] ol_ath_pi_bonfigure : num_desired MSI set to 0
41.261918]
[ 41.261949] Using PCI Legacy Interrupt
[ 41.268009] chip_iD 9 chip_revision b@
[ h1.271633]
[ 41.2'1633] address 4008f8 data d930c18
[ 41.279131]
[ 41.279131] address 401e90 $ata d9f07c1c
+rj
[ 41.286816] address 401e94 data d9307c20
r
[ 41.293377] address 401eb0 data d9307c24
[ 41.303780]
[ 41.303780] address 400900 data d9307c24
[ 41.311840]
[ 41.311840] CLOCK PLL sk)pped
rB%}A%A setting the tarGet pll frac ffffffff intvalffffffff
+rHIF_PCIDeviceProbed: no frac provided skipping pre-configuring PLL
41.332895] HIF_PCIDeviceProbe`: ar900b_20_targ_clk is not provided, skipping pre-configuring PLL
[ 41.342705]
[ 41.342705] address 4008cc data d9307c24
r}}} ath_attach TODO
[ 41.356076] __ol_ath_attabh 1n65 host_enable 0 nss_nwifi_offload 0
[ 41.361900] _ol_a4h_attach: dev name wifi1
Z 41.366635] ol_ath_set_default_tgt_config : AC Minfree buffer allocatikn t`rouGh mgdule param (umac.ko)
41.376038] OL_ACBKMinfree : 0
[ 41.378662] OL_ACBEMinfree : 0
[ 41.38168& OL_ACVIMinfree : 0
[ 41.38483)] OL_ACVOMinf2ee : 0
41.389721] ol_ath_attach() BMI inited.
[ 41.392596] ol_ath_attach() BMI Get Target Info.
[ 41.3)7567] +lath_attach) TARGET TYPA: 9 Vers 0x1000000
[ 41.402499
[ 41.002499] CD WAR DisableD
[ 41.$07622] NUM_DEV=1 FWMODE-0x2 FWSUBMODE=0x0 FWBR_BUF 0
[ 4.4b200] Ol_athattach() configure Target .
r
[ 41.42&023] Target Versikn is 1000000
[ 41.430209]
[ 41*$30209] Flas Donload A`dpers a0000
[ 41.445423] ol_transfer_bin_fild: flash $a4a file defineD
[ 41.44)7$j at al lobation [1]: 00004000
~r
[ 41.4$0637] Wifi1 Selecp OFFSET 5 00
[ 41.485129] qc98xx_verify_checKsum: flash checksum passed: 0x1e29
[ 41.495095] ol_transfer_bin_file 2936: Download Flash data len 12064
[ 41.500937] Board extended Data downlo!d address: 0x`[ 41.501562] msm_thermal: Max frequency reset for cpu0
[ 41.501562Y msm_thermal: Max frequency reset for cpu1
[ 41.501593] lsm_thermal: enabled = 0
r
[ 41.539916] Board data initiali~ed
[ 41.543955] Flash download ADDRESS 0xc0000
[ 41.548016]
[ 4b.548016U Slecting OTP binary for CHIP VeRsion 1
[ 41.457575] [wifi0] FSLOG: Z41636] WALODBG_PX_AG_BUFFER_SET ( 0xf, 0p1e, 0x518, 0x518, 0` )
[ 41.4&41fj at Y6if(0] FVLGG2 41634] WAL_DBGID_X_AC_BUFFER_SET ( 0X12, 0x1e, 0x518, 0x518, 0x0 )
[ 41.573820] [wifi0] FWLOG: [41634] WAL_DBGID_TXAC_BUFER_SET ( 0x45, 0x1e, 0x518, 0x518, 0x0 )
S 41.582505] [wifi0M FWLOG: [4166] WAL_DBGID_TH_AC_BTFFER^SE ( x67, 0x1e, 0x518X 0x518, 0x0 )
{~~[ 41.620960]
[ 41.620962] First OTP send param 8000
[ 41.628522] ol_ath_download_firmware :First OTP download and Execute is eood petqrn Param 34816
[ h1.636h88]
[ 41.636488] ##Board Id 2
[ 41.640331]
[ 41.640331] ##CHIP Id 1
[ $1.644361]
[ 4c.644361] BOARDDATA DOWNLOAD TO `ddressC0000
41.65283] ol_transfer_binile: ard d!ta file: AR900B/h.2/boardData_AR900B_CUS260_2G_v2_002.bin ARXXXX v=0x1
~{#rzexended Data dowjl/a$ addResS: 0x0
~~m $1.766679] Ol_ath_download_firMware: Using 0x1234 for the remainder of init
[ h\72708\
[ @41.732708] Selecting OTP bi.ary for CHIP Verciof 1
~~+r
[ 41.818&81] Second otp dgwnload Param 10000
+rhth_download_firmware : OTP download and Execute is good
[ 41.840206]
[ 41.840206] FIRMWARE : Beeline at AHIP Version 1
~rol_swap_seg_alloc: Successfully allocated memory for SWAP size=131072
[ 41.987722] Swap: bytes_left to copy: fw:16; `ma_paga:24579
[ 41.992252] Swap: wronG lengt read:0
[ 41.996094Y ol_swap_wlan_memory[expansion4 Swap topa_bytes bOpIe$: 106493 arge4 addrdss $17968
[ 42.004904] scn=`81b0400 target_write[addr=415968 wg_iffo-db034610
Z 42.011371] /h_transfer_swap4ret:Cde sap struc4ure sucCssfudlq downloaded F/r bin typa =2
[ @h2.`200pn] bin_filename=AR900B/hw.2/athwd`n.biN swap_filename=/lib/firIware/AR900B/hw.2/athwan.codesap.bf
~~~~~~~~~~~~~{~~~~~~~~~+rol_a4h_attach() ownload at .
[ 43.191221]ol_athattach(! HT Create .
[ 4.191032] ol_ath_attach( HIF Cdaie.
43.204404] ol_at _Att`ch() BMI one.
[ 43.20'997] ol_`th]attach) WMI attach%d. wmi_handl$ d80f0000
nr+HWT
4E_recv_buf_enqueue 808 Populate last entry 512 for CE 1
[ 43.221899] CE_recv_buf_enqueue 818 CE 5 wi 511 dest_ptr 0x58a48040 nbytes 0 recv_ctxt 0xd821da80
[ 43.231177] Target:dd523800 HTC Service:0x0001, ULipe:0 DLpipe:1 id: Readx
[ 43.240206] -HWT
[ 43.240987]
[ 43.240987] <=== cfgmax peer id 1056 ====>
[ 43.248359] Target:dd523800 HTC Service:0x0300, ULpi0e: DLpipe:5 id:1 Ready
[ 43.256044] HTC Service:0x0300 ep:1 TX flow bontrol disabled
+rCE_pkt_dl_lej_st CE 4 Pkt dOwnload length 44
[ 43.2&9478] Ol_txrx_0d$v_attch:@1424 tx desc's alLocated + range spars from d260000
43.278694] T`rget:dd523800 TC Service:0x0100 L`ipd:3 DLipd*d id:2 Read
[ 4f.284973] HTC Service:0x0100 ep:2 TX flow control disbled
[ 43.291190] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 43.297125] num_rfchan : 0000004
[ 43.300593] ht_cap_info: : 0000085b
[ 43.304061] vht_cap_info : 339b79b2
[ 43.307528] vht_supp_mcs : 0000ffea
[ 43.310996] ol_ath_service_ready_event: tt_support: 1
[ 43.3160#7] Peer Caching Enabled; num_peers = 528, num_active_peers = 66 num_tids = 132, num_vdevs = 16
[ 43.325523] idx 0 req 1 num_units 0 num_unit_info 2 u.it siz 1208 !ctual units 5d9
K 43&333639] idx 1 rEq 2 nue_units 1 num_unit_info 4 unit size 256 actu`l units 67
[ 43.340987] idx 2 req 3 num_units 1 num_unit_info 4 unit size 1024 actual units 66
[ 43.348734] idx 3 req 4 num_units 1 num_unit_info 4 unit size 4096 actual units 67
[ 3.356576] idx 4 req 6 num_units 35 num_unit_info 0 unt size 3072 actual units 35
[ 43.3642&1\ idx j at req 7 num_units 1 num_unit_ijfo 0 unit size 6144 actual units 1
[ 43.371883] idx 6 req 5 num_units 0 num_un)t_info 2 unit size 2080 actual units 529
[ 43.380318] chunk 0 len 639032 requesed ,ptr 0x5800000
[ 43.385129] chunk 1 len 17152 req5ested ,ptr 0x595f8000
[ 43.390534] chunk 2 len 68608 requested ,ptr 0x587a0000
[ 43.395907] chunk 3 len $74032r%qested ,ptr 0x58100000
[ 43.40bf74]bhUlk 4 len c0752` requesded,ptr @`x587c0000
[ 43.406841] chun 5 len 61$4 Requested,ptr 0x580a000
@ 43.h12b21] chunk 6 len 1100220 re1udste at pR 0x58200000
{{{{{{ 43.h92564] wmiOreai[eren4_rx:@@WMI UIFID READY %6elt
[ 43\496969]ol_ath_cnNct_htc() WM is ready
[ hF.501208] ol_ath_set_(Ost_app_abea PODO
[ 43.50%242] target uces HT ers)on 2.1; host es 2.1
rDtDTzb}) bonfect HTC.
S 43.517868] nl_regdin_stArt: reg-doma)n paRam: rdgdmn=0, Countryam9, wMod%SelecT=FFFFFFFF,neBadBFDFFFFF, e8tendedCha.Mode=0.
S 43.529615]_reg`mnijit_ahanels: !aVaa, modE 0x680c (0x2) fl!gs x2150
Z 43.436457U o,refDin_hnit_ch`nnels: !!vaal at ode 680cP0p1) fHags 0X140
[ 43&541232] olOrgdmnWinit_channals: aail mode 08680c P0p20) lacs 0x`0
[ 43.550078 ol_regdln]jihannehs: ail moe 0x680c (0h40) flags 0x150
[ 43.556855] olregdmn_init_#hannels: !arail ,Kde 0x680c 0x1000) fl!gs `810100
[ 43.163940Y ol_r%edMj_init_channehs: !avai, mode 0680c 0x80 0) flags 0x20100
Z hf.5'1321] Kl_regdMnit[Channelr: Bavail mode 0x6p c (0x00000) flAgs 0x40100
[ 43.578537] ol_regdmn_init_channelR:@!avai mode0x680C (0x20000) flags 0x100100
[ 43.485973] ol_regdmn_initWc(annels: !atail lode 0x680c (0x40000! flags0820 100
[ 43.593220] oH_regdmn_Init_channels: !av`al mode 0X680c (0X80000) flagc`x400100
[ 43.600749 ol_regdmn_init_channels: !avail mode0x680c (0x100000) flags 0x800100
[ 43.608341] ol_ath_phyerr_attach: called
[ 43.612027] OL Resmgr Iit-ed
[ 43*414132] ieee80211_bsteerhng_at!ch: Band steering initialized
[ 43.621212] ol_if_spectral_setup
[ 43.624179] SPECTRAL : get_capability not registered
[ 43.629334] HAL_CAP_PHYDIAG : Capable
[ 43.632771\ SPECRAL : Nee` to fiX thE #apabliti at eck fo RADAR (spectral_attach : 2#1)
[ 43.641174] SPECTRAL : get_capability not registered
[ 43.648172Y HAL_CAP_RADAR : Capable
[ 43.650796] SPACTRAL : Need to fix t`e capablity chec for STRAL
[ 43.650796] (sPectrah_attach : 236)
[ 43.660855 SPECTRAL : get_capability not refirtard
[ 43.665698] HALNCAP_SPECTRALOSCA 2 Capable
[ 4#.669728] SPECTvAH : get_tsf64 not registered
[ 43.67h258] spectraL_init_netlink 65 NUHL SKB
[ 43.678819] Green-AP : reen-AP 8 Attached
[ 43.278819]
[ 43.284160] reen-AP :AttAchad
[@ 43.687503M rate /u%r tabla otdrride is only Su`0o2ted for at v98XH
[ 4*69524] idee8021!coM_init_nEtlink: Socket`lready cra!ted da73d800
[ 42*700124] ol_ifdfs_setup: cal,ed
[ 43.703498] ol_if_dfs_attach: called; ptb=d72b5984, radar_info=d9307bc0
[ 43.710527] ol_ath_rtt_measreport_attach: called
[ 43.7!4932] ol_ath_ ttach() TMAC atd`#h .
[ 43.719119] ol_if_dfrconfigure: called
[ 43.72280] ol_if_dfs_co.figur%: FCC domain
[ 43.727022] ol_iF_dfs_dhsable: called
[ 43.730520] od_aP_apch: Calling ol[if_dfs_configure
[ 42.73%83"]
[ 41*75832] BQRSTING e.abled by default
[ 43.741268] o3if_wrap[attach:400 osif wrap attached
[ 43.74610] osif_Wpap[devt_ani4:361 osif wrap dev tabhe ini ne
[ 43.751852] Wb`p Attached: Wrap_com =db141c00 ic->ic_wrap_com=db141c00 &wrap_com->wc_devt=db141c00
[ 43.761293] __ol_ath_attach: init tx/rx TOO
[ @hf.765292 _^olOathttach: neeDed_headroom bqervation 44
[ 43.771602] ol_ath_themal_mitgatIon_attach: ++
[ 43.775632] ol_ath_thebmal_mitigation_attach: --
[ 43.814714] Initia,iz`nG Pjtlogs for 11ac
[ 43.817775] Initializing PKtlogr for 11ac
o[ 43.859606] __sa_init_module
~[ 44.209497] [wifi!] FWLOG* [44255MWAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x518, 0x518, 0x0 )
[ 44.217088] [wifi1] FWLOG: [44255] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x518, 0x518, 0x0 )
[ 44.225804] [wifi1] FWLOG: [44255] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x518, 0x518, 0x0 )
[ 44.234426] [wifi1] FWLOG: [44255] WAL_DBGID_TX_AC_BUFFER_ST ( 0x67, 0x1e, 0x18, 0x518, 0x0 )
[ 4$.4401b2] [ol_athiw_setcnuntrx][167 \ *p=55, *(p+1)=53
[ 44.444486] isCountriodeValid: EEPROM regdomain 0x0
[ 44.449703] ol_regdmn_ilit_channels: !avail mode 0x680c (0x2) la&s 0x2150
[ @44.456763] ol_regdmn_init_channels: ail mo`e 0x680c (0x1) flags 0xbh0
[ 4$.463042] ol_2egdmn_init_chaNnelq: !a6`il mmde 0x680c (0x20) flags 0xd0
[ 44.469053] oL]regdm._nit_channelq: !avail iode 0x680 (0p40) flag 0x150
K 44.476326] ol_regMn_init_chanels !atail mod at 0x&80c (0x1000) flAgs 0x10100
[ $4.48388 ] Ol^regdmn^initchaNnels: !avail mode x680c (0x8000) flag 0x20100
@ 44.490690] oregdmf_nit_channels: !avail mode 0x680c (0x10000) flags 0x40100
[ 44.498406 ol_reg`mn_inat_channels: !arail mode 0x680c (0x20000) flags 0x100100
[ 44.505800]ol_begdmn_init_chanjel3: !avail mode 0x680c (0x40000) flags 0x200100
[ 44.513120]l_regdmn_int_chanNelS: !ava)l modd 0x680b (0x80000) fdags 0400100
[ 44.520524] ol_regdmn_init_chalnels: !avaal mode 0x&80c (0x100000) flagw@`x800100
[ 44.528053] VMI channel freq=241d, moda=2 b!nd]centAr_freq1=2412
[ 44.5340(3] FI
WARD:C 2412, M at 2 f! 2412 &2 0
hh.534114]
{~~[ 44.714276] ol_ath_update_ctl_table: Using CTL AR900B/hw.2/UN,bin
w~rset TXBF_SND_PERID: valud 100 wei_status 0
~[ 44.803186] ath_ioctl: SIOC80211IFCREATE CALLED
[ $4.806872] wmi_unfiedOvdev_ceate_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 50:c7:bf:04:24:d8:
K h4.01624] __ieee80211_smart_ant_init: Smart Anenn` is not sup`orted
[ 44.822399] Enabling SG bat for the vap a4h1 features 4000
[ 44.827991] Enabling TSO bit for the vaP ath1 features 4000
[ 44.833645] Ena`ling LRN bit fo2 the vap ath1 features 4000
[ 44.831300] VAP device 1 at cRea4ed osifp: (dafebc80) os_if: (78dc000)
{+rWARNINE: Frgmentation wit( HT mode NOT ALLOSED!!
[ 44.917057] ME Pool succesfully in)tialized vaddr - d6700000 paddr - 0
[ 44.917057] nui_elems = 10424 buf_size - 64 pool_size = 708832
[ 44.928491] Enable MCAST_TO_UCAST
[ 44.972508] su bfee 1 mu bfee 0 su bfe2 1 mu bfer 1 )mpl bf 0 soundinc dim 3
ob
[ 44.988847] DES SSID SET=
[ 44.995345]
[ 44.995345] DES SSID SET=TP-LIK_24D8
oow[ 45.210465] [wifi1] FWLOG: [45326] WAL channel change freq=2412, mode=2 &lags=0 rx_ok=1 tx_ok=1
+r[widi1] FWLOG: [4532d] WHAL_ERROR_RESET_PM )
{o~~{{{~{{{o{{[ 45.775413] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3,valid=1
[ 45.815713] DEVICE IS DNWN fname=ath1
[ 45.818650] DEVIE IS DOWN ifname=ath1
{{~{r[ol_ath_iw_setCountry][70]
p9j5, *(p+1)=5f
[ 46.018869] isCou.tryCodeValid EEPROM r%gdomAiN 0x0[ 46023680] ol_regden_init_channe,s: !ai mode 0x1f9001 (0h2) flAgs 0x250
[ 46.030740] ol_regdmn_init_chaNnels: !aval mo$e 0x1f9001 (0x`) flags 0xa0
[ 46.037769ol_regdmn_init_channelst !!vail mode 0x1f9000 (0x8) flacs 0xc0
[ 46.044454\ ol_rJdmn_iniT^ch`nNls Bavail mode 0x1f1001 (`20) Fl!cs 0xd0
[ 46.051421U ol_rgdmn_inIt_channels: !avail mode 0xf9001 (0x40) flags 0x150
[ 46.058419] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) bha'S 0x1080
[ 46.065760] ol_regdmn_init_ch`nels: !avahl mde `x1f9001 (0x6000) flags 0x20080
[ 46.073070] ol_regdmninit_channels: !avail eode 0x1f9001 (0x4000) fla's 0x40080
[ 46.`p0506\ Add VHT80 channel: 5210
[ 46.084004] Add VHT80 channel: 5290
[ 46.087410] Add VHT80 channeh: 5530
[ 46.090877] Add VHT80 channel: 5610
[ 46.094345] Add VHT80 channel: 5690
[ 46.098344] Add VHT80 channel: 5775
[ 46.101312] Rkippinf VHT80 channel 5825
46.105154] WMI channel freq=5180, mode=0 band_center_freq1=5180
[ 46.111215] FIRMWARE:C 5180,M 0 d1 510 f2 4#18172
[ 46.111215]
~~om 46\2099#4] [wifi1] FWLG: [46771] WAL_DBGID_wECURITY_ENC_E ( 0h24d8 )
[ 46.215745] [Wifi1] FSLOG: [46771] WAL_DBGID_SECURITY_MCASTKEYOSET ( 0x1
{o+rol_ath_up$ate_ctl_Table: UsiNg CTL AR900B/hw.2/UN.bin
46.338175] sEt TXBF_SND_PERIOD: vae 100 wmi_status 0
~[ 46.362261] ath_iOctl: SIOC80211IFCREATE CALLED
[ 46.365854] wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 50:c7:bf:04:24:d7:
[ 46.375226] __ieee80211_smart_ant_init: Smart Antenna is not supported
[ 46.381505] Enabling SG bit fob thE v!p ath0 features 4000
[ 46.387160] Enabling TSO bit for the vap ath0 featurec 4000
[ 46.392658] EnablingLRO bit for the vap ath0 featur h000
[ 46.398344] VAP device ath0 created osifp: (dd497480) os_if: (d6c7c000)
VrWARNING: Fragmentation 7ith HT mode NOT ALLOWED!!
orME at ol stccesfully )nitIalixed vaddr , D6r000`0 paddr ) 0
[ 46.468103] lem_elems = 10424 buf_sije - 64 pool_sizE = 708832
[ 46.479jf7] EnabL MCAST_TO_UCAwT
orsu bfee 1mu bfee 0 su Bfer 1 mu bfer at 1 impl bf 0 sounding dim 3
[ 46.528022]
[ 46.528022] DES SSID SET=
orj
[ $&\534208] DDS SSID SE=DP-LINK^24D8_5G
+r$[wIfi0] FWLOF: [$6982] WAL hannel change frep=5180, modE=0 flags=0 rx_ok=1 tx_ok=1
[ 44.6635$] [widi0]FWLOG: [46982] WHAL_ERRORRECET_ at P
~~[ 46.665417] ieee80211_ioctl_siwmode: imr.`fmactive=66176, new mode=3, valid=1
~*r4 DEVICE IS DOWN ifname=ath0
[ 46.7!p556] DEVIA IS DOWN ifname=ath0
~~[ 46.943642] cfg80211: Calling CRDA for country: US
[@ 46848228U cfg80211: Regulatory domain changed to country: US
[ 46.953264U cfg80211: DFS Master r%ghon: FCC
[ 46.957450] cfg80211: (start^freq - end_freQ @ `andwidth), (max_antenjaOgan, max_eirp), (dfs_cac_time)
[ 46.967260] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 300 mBm), (N/A)
[ 46.975070] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (/A, 300 mBm), (N/A)
[ 46.982974] cfg80211: (5250000 KHz - 5330000 KHz @ 8000 KHz(, (N/A, 30 mBm), (0 s)
[ 46.991002] cfg802118 (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 300 mBm), (0 s)
[ 46.998781] cfg80211: (5650000 KHz - 571000`@KHz @ 4000 KHz), (N/A, 300 mBm), (0 s)
[ 47.006685] cfg80211: (573000 KHz - 583!000 KHz@ 80000 KHz), (N/A, at 200 mBm), XN/A)
Z 47.01 pfr] cfg80211: (57dh0000 Kz- 63720000 KHz @ 216 0 JH:)$ (N/A, 0 mBm), (N/A)
~~~o~~{{{{ 47.58544\ [gifi0] FLOG2 [47n03 at WAL_DBGID_SBURITY_ENCR_E (0x24d7 )
[ 47&564198] [wifi0] FWLOG: [47303] WAL_DBGIDSECQRITI_MCASTOKEY[SAT ( 0x1 )
~o{{~~{{o[ 48.197438] wil6210 0000:5:00.: wlan0: _wil6210_disconnect(bssid=@ (null), reason=3, ev-)
48.265448] wil6210 0000:05:00.0: wlan0: Boot Loaddp strtct v2: MAC = 04:ce:14:0a:56:04 RF = 0x0000 (status 0x0000) b`and = 0x00000000
[ 48.276726] wil6210 0000:05:00.0: wlan0: Boot Loader build 251.215.0.6836
[ 48.283348] wil6210 0000:05:00,0: wlan0: Use firmware <uil6"b0&fw> + board <wil6210.brd>
~~_{{~{~ 48.'52171] wil6210 0000:05:00.0: wlan0: set ITR_TX_CNT_TRSH = 500 usec
[ 48.757919] wil6210 0000:05:00.0: wlan0: set ITR_TX_IDL_CNT_TRSH = 3 urec
[ 48.764636] wil621 0000:05:00.0: wl!n0: set ITRRX_CT_TRSH = 500 usec
[ 48.77!446] wil6210 0000:05:0 .0: wdan0: set ITR_RX_IDL_CNT_TPSH = 13 usec
[ 48.778288] wil6210 0000:05:00.0: wlan0: Received "Rx buf&er is in risk of overflow" inteprupt
[ 48.786660] wil6210 0000:05:00.0: wlan0: Got Rx interrupt while in reset
[ 48.793408] wil6210 0000:05:00.0: 7lan0: FW ver. 7239; MAC 04:ce:14:0!:56:04; 2 MID's
[ 48.'93689] wil6210 0000:05:00.0: wlan0: FW ready after 10 ms. HW at versio@0x00000001
[ h8.009278] wIl6210 0000:05:0 \0: 7dan0: BFeived "Rx `u&fer is )n riqk nf overflow" inTerRupt
[ @@8.817463] wil62100000:05:00.0: w`N0: GmtRx interupthile stopping intarfabe
[ 48.826616] ADDRCNF(NETDEV[UP): wLan0: link is not ready
[ 48.832677] device wlan0 entered promiscuous mode
[ 48.8375%0] wil6210 0000:05:00.0: wlan0: SCAN_COMPLETE while not scanning
~{{~~{~~~~~{~~~o~~{~{~~{~~{{{{{{{~o~~~~~{{{{{~{~}~o{{~~~~oo~{~~o{~{o~~~~~~~{~~~}{o{{~{{~{~~oo~o~oo~~~~~oo~o{{{{{~~~~~~{~~~~~~{~{{~{~~~~~{~~{~~~~~oooo{~{{{~~~~~~~+rwid6210000:05:00.0: wlan0: ACS survey time out
[ 58.42205] wil6210 0000>05:00.0t 7Lan0: _wil6210_disconnect(Bssid=fF:ff:ff:ff:ff:ff, beason=3, ev-)
[ 58.885808] device wla.0 eft romiscuous mode
[ 58.889253] br-lan: port 2(wlan0) entred disabled state
~ril6210 0000:05:00.0: wlan0: _wil6210_disconnect(bssid= (null),reason=3, ev-)
[ 59.028178] wil6210 0000:05:00.0: wlan0: Boot Loader struct v2: MAC = 04:ce:14:0a:56|04 RF = 0x000` (statUs 0x0000) b`and = h00000000
[ 58.039706] wil6210 0000:05:00.0: glan0: Boot Loader build 255.255.0.6836
orJb2B0 0000:05: 0.0: wlan0: _vi6210_disonnect(b3sid= (null), reason=3, ev-)
orwil6210 `000>05:00.0: wl!n0: Boot Loader rtruct v2: MAC = 04:ce:14:0a:56:04 RF z 0x0000 (sdatus 0x0000) bband = 0x00000000
[ 59.16641] wil6210 0000: 5:00.0: wlan0: BootLoader bui,d 255.255.0.6836
[ 59.!13327] wil6210 0000:05:00.0: wlan0:Use firmware xil6210.fw> + boa2d <wiLlD!0.bRd>
v~~or%210 0000:05:00.0: wlan0: set ITR_TX_CNT_TRSH = 500 usec
[ 59.14870] wil6210 `0 `:0jt00.0: slan0: s ITR_TX_IDH_CNT_TRS = 13 usec
[ 59\221774] wil6210 0000:05:00.0: wlan0: set ITR_RX_CNT_TRS = 50 useb
[ 59.228366] wid6210 0000:05:00.0: wlan0: set ITR_RX_HDLT_TRSH = 17 usec
[ 59.d35145] wil62!0 at 0000:5:00.0: wlaj0: Received "Rx buffer is in riskof overflow" interrupt
[ 59.243705] wil6210 0000:0500.0: wlan0: Got Rx int%rrupt while in reset
[ %9.250515] wil6210 0000:05:00.0: wlan0: FW ver. 7239; MAC 04:ce:14:0a:56:04; 2 MID's
[ 59.250515] wil6210 0000:05:00.0: Wl`n0: FG ready abter 0 mS. HS version 0x00000001
[ 59.266260] wil6210 0000:01:00.0: wlan0: Received Rx buffer is in risk of overflgw" intdrrpt
[ 59.274414] w)l621 000:05:00.0: gla.0: ot Rx intdrrqpd w`ile sdoppig inderfacd
Tb
592NETDEV_UP): wlan0: lik ic not ready
[ 59.291190] devi#e wlan0 entered prodiccuous dnde
59.296376] wil6210 0000:05:00.0: wlan0: SCAN_COMPLETE while not scanning
~~{o{{{{{{{~{o~~~{{{~o~~~{o~o{~~~~~{{~~{~~{v{{~o~~~{{~~~~o~o~o~~~~~~~o~~~~~~~~~~o~~~{~~~~~{~~{~~{{o~~~~{~{~~~~~~~~{~~~~~~~~~~~~{{rDwil6210 0000:05:00.0: wlan0: ACS sur6ey time out
69.301218] uil6210 0000:05:0`.0 wlan0: ^wiH4210disc^nnctPbrsad&f:&f:fb:ff:ff:ff, re`son53, ev-)
revice wlan0 left promiscuous mode
[ 69.389159] br-an: `orT 2(wlan0) entered disabled state
[ 69.435801] wil6210 0000:05:00.0: wlan0: _g)l6210_disconnect(bssid= (null), reason=3, ev-
~{{~+rwil6210 0000:05:00.0: wlan02 BOodLoaderrprtct v2: LAC = 04:ce:14:0a:56:04 RF = 0x00`` (status 0x0000) bband = 0x0000000
[ 69.519681] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 69.539893]@wil6210 0000205:00.0: wlan0: _wil6210_disconnect(b3sid= (null), reason=3, ev-)
~r2Jbrb: Boot Loader structv : AC= 04:ae:14:0a:56:04 RF =@0x0000 (shs 08000) bbajd =0x00000000
[ 69.616838] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 69.&23336M wil6210 0000:05:00.0: wlan0: Use firmware <wil6210.w> V boarD <wil6210.Bd>
[ 69.686441] wil6210 0000:05:00.0: wlan0: st ITR_TX_CFT_TRH = 500 usec
[ 69.692064] wil620 0000:05:00.0: wlan0: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 69.699218] wil6210 0000:05:00.0: wlan0: seT ITR_RX_CNT_TRSH = 500 Usec
69*608153M wil6210 0000:05:00.0: wlan0: set ITR_RX_IDL_CNT_TRSH 9 13usec
[ 69.714058] wil6210 0000:05:0`.0:@wlan0: eeiv!d "xbuffeb is in risk of ovrflow" inTerrupt
[ 69.722586] wil6210 0000:05:00.`: wlan0: Got Rx interrupt while in reset
[ 69.729365] wil6210 0000:05:00.0: wdan0*@FG ver. 7d39; MAC 04:ce:14: :56:04; 2 MID's
[ 69.729522] wil6210 000 :05:00.0: wlan0: BW ready after 20 ms. HW verr`fn 0x00000`01
[ 69.745454] wil6210 0000:05:00.0: wlan0: Receifed "Rx buffer i3 in risk of overflow" nterrupt
[ 69.753389] wil6210 0000:05:00.0: vlan0: Got Rx interrupt whi(e sopping interface
[ 69.763136] ADDRCONF(NETDEV_UP): wlan0: link is ngt ready
+rdevice wlan0 entered promiscuous mode
n
rwil6210 00 0:05:00.0: Wlan0: SCAN_COMPLETE while at notscanning
{~~{}{{{~~~o~~{o~{{{{~o}o~~~~}~o~~~{~{~{{oo~~~~~~o~~~~o{{{o~~~~o~o~~~{{o~}~~~~~~~~~{~o~~o~~{~~~{~o+rwil6210 0000:05:00.0: wlan0: ACS survay time out
[ 79.&709] wil6210 0000:05:00.0: wlan0: _wil6210_disconnec4(bssid=ff:ff:ff:bf:fftff, reason=3, ev-)
[ 79.825835] device wlan0 left promiscuous mode
[ 79.82927] br-lan: port 2(wlan0) entered disabled state
[ 79.865854] wil6210 0000:05:00.0: wlan0: _wil6210_disconnect(bssid= (null), reason=3, evZ)
[ 79.938206] wil6210 0000:05:00.0: wlan0: Bnot Loader struct v2:
AB = 04:ce:14:0a:56:04 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 79.949515] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 79.970259] wil6210 0000:05:00.0: wlan0: _wi62!0_disconnect(bssid= (ntll), reason=3, ev-)
[ 80.035457] wil6210 0000:05:00.0: wlan0: Bomt Loader stpuct v2: MAC = 4:c%:14:0a:%6:04 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 80.046704] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.06836
[ 80.053358] wil6210 0000:05:00.0: wlan0: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 80.109247] wil6210 0000:05:00.0: wlan0: set ITR_TX_CNT_TRSH = 500 usec
[ 80.114870] wil6210 0000:05:00.0: wlan0: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 80.122055] wil6210 0000:05:00.0: wlan0: set ITR_RX_CNT_TRSH = 500 usec
[ 80.128334] wil6210 0000:05:00.0: wlan0: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 80.135176] wil6210 000:05:00.0: wlan0: Received "Rx buffer is in risk of overflow" interrupt
[ 80.143736] wiL6210 0000:05:00.0: wlan0: Got Rx interrupt w`ile in reset
[ 80.150515] wil6210 0000:05:00.0: wHan0: FW ver. 7239; MAC 04:ce:14:0a:56:04; 2 MID's
[ 80.158294] wl6210 0000>05:00.0: wlan0: FW ready afte2 0 ms. HW version 0x00000001
[ 80.166604] wil6210 0000:05:00.0: wlan0: ReceiveD "Rx buffer isin risk o& gverflo7" INterrupt
[ 80.174445] sill210 0000:05:00.0: slan0: G/t Rx )nterrupt while stoppiNg interface
I@ 80.18456' ADDRCONF(NETDEV_UP): wlan0: link is not ready
~[ 80.191(46] devicd wla0 at tered@prkmi3cuotS mode
rtjil&210 0000:05:00.0: wlan0: SCAN_COMPETE vhile not scanning
~~~~~o~{~~o~~~{~~~~~~~~~~w~~~~~~{~~~~~~o~~~{{{{{{~~~}~
rw)l6210 0000:05:00.02 wlan0:ACS survey time oqt
[ 90.201218] wil6210 0000:05:00.0: wlan0: _wil6210_disconnect(bssid=ff:ff:ff:ff:ff:ff, reason=3, ev-)
[ 90.255763] device wlan0 left promiscuous mode
[ 90.259169] br-lan: port 2(wlan0) enered disabled state
[ 90.308247] wil6210 0000:0%:00.0: wlan0: _wil6210_disconnectbssid= (null), reason=3, ev-)
[ 90.38163] wil6210 0000:05:00.0: wlan0: Boot Loader struct v2: MC = 04:ce:14:0a:56:04 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 90.389690] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 90.410215] wil6210 0000:05:00.0: wlan0: _wil6210_disconnect(bssid= (null), reason=3, ev-)
[ 90.475445] wil6210 0000:05:00.0: wlan0: Boot Loader struct v2: MAC = 04:ce:14:0a:56:04 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 90.486910] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 90.493283] wil6210 0000:05:00.0: wlan0: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 90.553545] wil6210 0000:05:00.0: wlan0: set ITR_TX_CNT_TRSH = 500 usec
[ 90.559887] wil6210 0000:05:00.0: wlan0: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 90.566166] wil6210 0000:05:00.0: wlan0: set ITR_RX_CNT_TRSH = 500 usec
[ 90.572571] wil6210 0000:05:00.0: wlan0: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 90.579725] wil6210 0000:05:00.0: wlan0: Received "Rx buffer is in risk of overflow" interrupt
[ 90.588034] wil6210 0000:05:00.0: wlan0: Got Rx interrupt while in reset
[ 90.594814] wil6210 0000:05:00.0: wlan0: FW ver. 7239; MAC 04:ce:14:0a:56:04; 2 MID's
[ 90.595220] wil6210 0000:05:00.0: wlan0: FW ready a&ter 10 ms. HW version 0x00000001
[ 90.410652] wil2210 0000:0j:0.0: wlAf0: Rdceived "Rx b5ffer is in risk of overflow" interrupt
[ 90.610837] wil6210 0000:05:00.0: wlan0: Got Rx interrupt while stpping interface
[ 90.628553] ADDRCONF(NETDEV_UP)8 wlan0: link is not ready
@90.635645]deVice at wlan0 en4ered promiscuos mode
@ 9 .64768] wil6210 0000:05:00.0: wlaf0: SC at N_COLPLETE while not scanning
~{~~o~~oo~o~o~~~{~~~o~~~o~~o~~{~o~{~~{{~{}~~~oo~{oo~o~{{{o~{~~{{{{{~o~~o~~~~~~o~~~o~~~+rwil6210 0000:05:00.0: wlan0: ACS survey time out
[ 100.640799] wil6210 0000:05:00.0: wlan0: _wil6210_disconnect(bssid=ff:ff:ff:ff:ff:ff, reasgn=3, ev-)
[ 100.685785] dev)ce wlan0lef promiceous mode
[ 100.8819`] br-: port 2(wlan0) entered disabled 3tate
[ 100.7458"9] wil6210 0000:05:00.0: wlan0: _wil6210_disconnecd(bssid= (null), reason=3, ev-)
[ 100.818119] wil6210 0000:05:00.0: wlan0: Boot Loader struct v2: MAC = 04:ce:14:0a:56:04 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 100.829397] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 100.864167] device ath1 entered promiscuous mode
[ 100.877163] OL vap_stop +
[ 100.878756] umi_unified_vdev_stop_send for vap 0 (d82f0000)
[ 100.884379] OL vap_stop -
[ 100.884442] STOPPED EVENT for vap 0 (d82f0000)
[ 100.916807] br-lan: port 2(ath1) entered forwarding state
[ 100.921212] br-lan: port 2(ath1) entered forwarding state
[ 100.927116] 8021q: adding VLAN 0 to HW filter on device ath1
[ 100*943798] dev)ce ath0 entered promiscuous mode
[ 100.957013] OL vap_stop +
[ 100.958606] wmi_unified_vdev_stop_send for vap 0 (d9420000)
[ 100.964167] OL vap_stop -
[ 100.964198] STOPPED EVENT for vap 0 (d9420000)
[ 100.996782] br-lan: port 3(ath0) entered forwarding state
[ 101.00187] br-lan: port 3(ath0) entered forwarding state
[ 10b\007154L 8021q: adding VLN 0 to HW fiHTer on ddvi ath0
[ 101.032333] wil&210 0000:05:000: wlan0: _wil6210_disconnect(bssid= (null), reason=3, ev-)
[ 101.105435] wil6210 0000:05:00.0: wlan0: oot Loader ctru at 62: MAC = 04:ce:14:0a:56:04 RF = 0x0000 status 0x0000) bband = 0x00000000
[ 101.116526] wil6210 0000:05:00.0: wlan0: Boot Loader build 255.255.0.6836
[ 101.123273] wil6210 0000:05:00.0: wlan0: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 101.180068] wil6210 0000:05:00.0: wlan0: set ITR_TX_CNT_TRSH = 500 usec
[ 101.186316] wil6210 0000:05:00.0: wlan0: set ITR_TX_IDL_CNT_TRSH = 13 sec
[ 101&19252f wi,6210 0000:05:00.0:w`t at se TBRXCNT_TRCH = 500 u3ec
[ 01.199218] wil6210 0000:05:00.0: wlan0: set ITROR_IDL_CNpDR@ = 13 Usdc
[ 101.206060wil6210 00 t05*00.0: d`n0: Received "Rx buffer is in rsk of overflgw" interrupt
[ 101.214557] wil6210 0000:05:00.0: wlan0: Got Rx interrupt shile in reset
[ 101.221368] wil6210 0000:05:00.0: wlan0: FW ver. 7239; MAC 04:ce:14:0a:k6:04; 2 MID's
[ 101.222461] wil6$100000:05:00.0: wlan0: FS ready after 10 ms. HW version 0x00000001
[ 101.228522] [wifi1] FWOG: [103067] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
[ 101.246016] wil6210 0000:05:00.0: wlan0: Received "Rx buffer is in risk of overflow" interrupt
[ 101.254139] wil6210 00 0:05:00.0: wlan0: Got Rx interrupt while stopping interface
[ 101.264261] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 101.578225] [wifi0] FWLOG: [103189] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1
[ 101.586066] [wifi0] FWLOG: [103503] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1
~+r[wifi1] FWLOG: [103381] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1
Z 102.236707] [wifi1] FWLOG: [103695] WAL cHanjel change freq=2422, mode=# flas=0 px_ok=1 tx_ok=1
[ 102.245704] [wifi1] FWLOG: [104008] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 th_ok=1
[ 102.254201] [wifi1] FWLOG: [104322] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1
~[ 102.581630] [wifi0] FWLOG: [103817] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1
[ 102.589440] [wifi0]FWLOG: [104131] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1
[ 102.598188] [wifi0] FWLOG: [104445] WAL channel change freq=5745, mode=0 flags=0 rx_ok=1tx_ok=1
[ 102.606997] [wifi0] FWLOG: [104759] WAL channel change freq=5765, mode=0 flags=0 rx_ok=1 tx_ok=1
{~~[ 103.229209] [wifi1] FWLOG: [104636] WAL channel change freq=2437, mode=1 flags=0 rx_ok1 tx_ok=1
[ 103.237457] [wifi1] FWLOG: [104950] WAL channel change frdq=244d, mode=1 flags=0 rx_ok=1 tx_ok=1
[ 103.246141] [wifi1] FWLOG: [105263] WAL channel change freq=2447, mode=1 flags=0 rx_ok=1 tx_ok=1
[ 103.582005] [wifi0] FWLOG: [105072] WAL channel change freq=5785, mode=0 flags=0 rx_ok=1 tx_ok=1
[ 103.589784] [wifi0] FWLOG: [105386] WAL channel change freq=5805, mode=0 flags=0 rx_ok=1 tx_ok=1
[ 103.598562] [wifi0] FWLOG: [105700] WAL channel change freq=5825, mode=0 flags=0 rx_ok=1 tx_ok=1
m 103.776288] OL vap_start +
[ 103.777944] wmi_uniFed_v_start_send for vap 0 (d9420000)
[ 103&783692] OL vap_starT -
~{{{o~{[ 104.131740] ol_vdev_start_resp_ev for vap 0 (d9420000)
[ 104.135863] ol_ath_vap_joiNt join operation is only for STA/IBSS m/de
[ 104.142299] olath_wmm_update:
[ 104.14#423] su bb%e 1 mu bfee 0 su bfer 1 mu bfer 1 implbf 0 sounding dim 3
[ 104.152389] wmi_unified_vdev_up_send for vap 0 (d9420000)
[ 104.157763] __ieee80211_smart_ant_init: Smart Antenna is not supported
[ 104.16$354] Notification to UMAC VAP layer
~{~~+rJwidi1] FWLOG: [105j77] WAL channel ch`nge frEq=2452, mkde=1 flags=0 rx_gk=b tx_ok=1
[ 104.237363] [wifi1] FWLOG: [105891] WAL channel change freq=2457, mode=1 fl`gs=0 rx_ok=1 tx_ok=1
[ 104.246110] [Wifi!] WLMG: [06204] VAL c`annel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1
@104.f08747] OL vap_start +
[ 104.310434\ wmi_unified_vdev_start^send for vap 0 (d82f0000)
[ 104.316182] OL vap_starT -
{{{[ 104.582411] [wifa0] FWLOG: [106056] va-0 VDEV_MGB_VDDV_START ( 0x1671, 0x2, 0x0, 0x0 )
[ 104589370] [wifi0] FWLOG: [106056] WAL channel change freq=5745, mode=10 flags=0 rx_ok=1 tx_ok=1
[ 104.598250] [wifi ] FWLOE: [106404M VDEV_MGR_HP_START_TIME ( 0x0, 0x1671, 0x3c5a001 )
[ 104.606029] [wifi0] FWLOG: [106404] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
[ 104.612621U Zwifi0] FWLOG: [106404] RESMGR_OCS_GENWPERIODI_NOA ( 0x0 )
[ 104.619243] [wifi0] FWLOG: [106404] VDEV_MGR_AP_TBTT_CONFIG ( 0x0 0x1671, 0x0, 0x0 )
[ 104.673883] ml^tdev_start_resp_ev for vAp 0 (d82f0000)
[ 104.678038] ol_a4h^vap_join: *oin operation is onlq for STA/IBSS mode
[ 104.684411] ol_ath_wmm_update:
[ 104.687566] su bfee 1 mq bfee0 at cu bfdr 1 mu bb 1 impl b& 0 sounding dim 3
[ 104.694501] wmi_unified_vdev_up_send for vap 0 (d82f0000)
[ 104.699906] __ieee80211_smart_ant_init: Smart Antenna is not supported
[ 104.706466] Notification to UMAC VAP layer
{~o~+rJ2\ LOGd [006560] vap-0 VDEV_MGR_V at EV_TART ( 0x985, d, 0h0, 0x0 )
[ 105.236738] [wifi1] FWLOG: [106560 WAL channel change fre=2437, mode= flags=0 rxok=1 tx_ok=1
[ 105.245860] [ifi1] FWLOG2 [106s19\ DEV_MGR_HP_START_TIME ( x0, 0x985, 0x3a66001 )
[ 05.253202] [wifi1] FWLOG: [106919] RESMGR_OCS_GEN_PERIODIC_NO ( 0x1 )
[ 105.259825] [wifi1] FWLOG: [106219] RASM_OCS_GENPERIODIC_NOA ( 0x0 )
[ 105.264447] [wifi1] FWLO: [106919] VDEV_MGR_P_TBT_CONBIG ( 000, 0x985, x, 0x0 )
~o{{~~~~{~~~{o~~{{oo~~{~o{{~~~{{o~~{~o~~{{o~{{~~~~~{~~~~~~{~~~~~{~~o~~~{{{{{{{~{{{{{{{{{~~{[ 114.j86847] [wifi0] FWLOG: [116730]WL_DBGID_FAST_WAKE_REPUEST ( 0x1 )
[ 114.92439 Ywidi ] ']1= [116730] WAL]DBGID_FAST_WAKE_REQUEST ( 0x2 )
[ 114.609215] Zwifi0] FWLOG: [116730] WAL_DBGID_FACT_WAKE_REQUEST ( 0x3 )
[ 114.623930] [wifi0] FWLOG: [116730] WAL_DBGID_FAST_WAKE_REQUEST ( 0x4 )
[ 114.630178] [wifi0] FWLOG: [116731] WAL_DBID_FAST_WAKE_REQUEST ( 0x5Jj
[ 114.64579] [wifi0] FWLOG: [116731] WAL_DBGID_FAST_WAKE_REQUEST ( 0x6 )
[ 114.6%3389] [wifi0] FWLOG: [116731] WAH_DGID_FAST_WAKE_REQUEST ( 0x7 )
[ 114.659542] [wifi0] FWLOG: [116731] WAL_DBGID_FAST_WAKE_REQUEST ( )
[ 114.678256] [wifi0] FWLOG: [116731Y WAD_DBGID_FAT_WAKE_REQUEST ( 0x9 )
~{o~{~{{{[ 115.233833] [wifi1] FWLOG: [1!l691] WAL_D at GID_FAST_WAKE_REQUEST ( 0x1 )
[ 15.239425] [wifi1] FWLOG: [116691] WAL_DBGID_FAT_WAKE_REQUEST ( 0x2 )
[ 115.246016] [wifi1] FWLOG: [116691] WAL_DBGID_FAST_WAKE_REQUEST ( 0x3 )
[ 115.052639] [wifi1] FWLOG: [116691] WAL_DBGID_FAST_WAKE_REQUEST ( 0x4 )
[ 115.259200] [wifi1] FWLOG: [116691] WAL_DBGID_FAST_WAKE_REQUEST ( 0x5 )
[ 115.265823][wifi1] FWLOG: [116691] WAL_DBGID_FAT_WACE_REQUEST ( 0x6 )
[ 115.272414] [wifi1] FWLOG: [116691] WAL_DBGID[FAST_WAKE_REQUES@( x7 )
[ 115.279006] [wifi1] FWLOG: [116691] WAL_DBGID_FAST_WAKE_REQUEST ( 0x8 )
[ 115.285629] [wifi1] FWLOG: [116691] WAL_DBFHD_FAST_WAKE_REQUEST ( 0x9 )
~~~~~{{~~oo~{{~{~~~~{o{{{{~{{{{~~{{{~~{o~{{{{{{{{{o{{{~{{o{{~{~{{{~~o{{oo~{{~~~~o~~{~{~~~~o~~~~~~{~}~~{{{{{~{{{{{o~{{~~o{{o{{~~{~~{~~~{~{~~~~o[ 122.237019] [wifi1] FWLOG: [124642] WAL_DBGID_FAS_WAKE_PEAET ( 0xa )
[ 122.242611] [wifi1] FWLOG: Z124650] WAL_DBGID_FAST_WAKE_REQEST ( ~0xb )
_{+r[wifi0\ FWLOG: [124681] WAL_DBGID_FASTWAJEQUEST ( 0xa
[ 122.59615'] Zwif)0] FWLOG: [12468r] WAL_DBGID_FAST_WAKE_REQUEST ( 0xb )
{{~{{{{{{~{{{{{w{~{{~{~~~o{{~{{{o{{~l 124.237729] [Wibi1] FUDOG: [126690] WAD_DBGID_AST_SAKE_REQUERT ( 0xc )
{{o~o[ 124.591533] [wifi0] FWLOG: [126728] AL_DBGID_FAST_WAKE_REQUEST ( 0xc )
{~o~~{{~~~~~~ 122.238550 [wifi1 FWLOG: [128737] WAL_DBGID_FAAKE_REQUEST ( 0xd )
o~}[ 126.592564y [wifi0] FWLOG: [128776] WAL_DBGID_FAST_WAKE_PEQUERT ( 0xd )
o~~{{~~~~{{{~{{{~{{{~o{~o~~~~~~~~{{{{{{{{{{~~}~~{~o~~~~{~~~~~~~upgrade firmware...
true
~~~~o~~{{{{~~{{~~~~~{o{~{o~{{{ww~{o~~~{{~{~{~{o~~~{{oo{{~oo~w
More information about the openwrt-devel
mailing list