[PATCH 1/2] ipq40xx: net: phy: qca807x: fix GPIO driver

[Robert Marko]

While rebasing into setting bits instead of magic values,
I accidentally forgot to actually set the force bit.

Without it using the pins as GPIO-s did not actually work.

Fixes: b5c93ed ("ipq40xx: add Qualcomm QCA807x driver")

Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
 target/linux/ipq40xx/files/drivers/net/phy/qca807x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
index 10d38d94a6..16d7a80455 100644
--- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
+++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c
@@ -356,6 +356,7 @@ static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int valu
 
 	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset));
 	val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
+	val |= QCA807X_GPIO_FORCE_EN;
 	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
 
 	phy_write_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset), val);
-- 
2.29.2