[OpenWrt-Devel] [PATCH] lantiq: fritz7312: set maximum speed to 100 mbit on 5.4

[Adrian Schmutzler]

The fritz 7312 does not support 1000 gbit. Advertising it makes it
worse. Some NIC will change to 1000 gibt and turn off and on again for
ever.

The previous patch in 36f628910b8b was only applied to the 4.19 file.

Cc: Alexander Couzens <lynxis at fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 .../files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts
index aa825abd9f..0f635127f8 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts
@@ -108,6 +108,7 @@
 		phy0: ethernet-phy at 0 {
 			reg = <0>;
 			reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+			max-speed = <100>;
 		};
 	};
 };
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel