No subject
Thu Jun 25 05:52:11 EDT 2020
phytool is a Linux MDIO register access utility.
Usage:
phytool read IFACE/ADDR/REG
phytool write IFACE/ADDR/REG <0-0xffff>
phytool print IFACE/ADDR[/REG]
where
ADDR := C22 | C45
C22 := <0-0x1f>
C45 := <0-0x1f>:<0-0x1f>
REG := <0-0x1f>
Note: Not all MDIO drivers support the port:device
Clause 45 address format.
The read and write commands are simple register level accessors.
The print command will pretty-print a register. When using the
print command, the register is optional. If left out, the most
common registers will be shown.
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
package/network/utils/phytool/Makefile | 46 ++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 package/network/utils/phytool/Makefile
diff --git a/package/network/utils/phytool/Makefile b/package/network/utils/phytool/Makefile
new file mode 100644
index 0000000000..b971c1ad13
--- /dev/null
+++ b/package/network/utils/phytool/Makefile
@@ -0,0 +1,46 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=phytool
+PKG_VERSION:=2
+PKG_RELEASE:=1
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=https://github.com/wkz/phytool/releases/download/v$(PKG_VERSION)
+PKG_HASH:=9901a14e8c6af02b7333c60b21ff81f50620e8326d54827185e5617ff9b11d21
+
+PKG_LICENSE:=GPL-2.0+
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_MAINTAINER:=Christian Lamparter <chunkeey at gmail.com>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/phytool
+ SECTION:=net
+ CATEGORY:=Utilities
+ TITLE:=phytool Linux MDIO register access
+ URL:=https://github.com/wkz/phytool.git
+endef
+
+define Package/phytool/description
+ Linux MDIO register access
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS) -Wall" \
+ LDFLAGS="$(TARGET_LDFLAGS)"
+endef
+
+define Package/phytool/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/phytool $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,phytool))
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list