[OpenWrt-Devel] [PATCH v3 2/2] ramips: Add support for ZBT WE1026-H

mail at adrianschmutzler.de mail at adrianschmutzler.de
Sun Nov 3 09:14:15 EST 2019


> -----Original Message-----
> From: Kristian Evensen [mailto:kristian.evensen at gmail.com]
> Sent: Sonntag, 3. November 2019 14:35
> To: Adrian Schmutzler <mail at adrianschmutzler.de>
> Cc: OpenWrt Development List <openwrt-devel at lists.openwrt.org>
> Subject: Re: [OpenWrt-Devel] [PATCH v3 2/2] ramips: Add support for ZBT
> WE1026-H
> 
> Hi Adrian,
> 
> On Sun, Nov 3, 2019 at 12:36 PM <mail at adrianschmutzler.de> wrote:
> >
> > Hi Kristian,
> >
> > > -----Original Message-----
> > > From: openwrt-devel [mailto:openwrt-devel-
> bounces at lists.openwrt.org]
> > > On Behalf Of Kristian Evensen
> > > Sent: Samstag, 2. November 2019 15:19
> > > To: openwrt-devel at lists.openwrt.org
> > > Cc: Kristian Evensen <kristian.evensen at gmail.com>
> > > Subject: [OpenWrt-Devel] [PATCH v3 2/2] ramips: Add support for ZBT
> > > WE1026-H
> >
> > I've already pulled your patches into my staging tree, but then stumbled
> over the USB LED as Power LED thing:
> >
> > https://git.openwrt.org/openwrt/staging/adrian.git
> >
> > I personally don't like that very much, and it also doesn't strictly match the
> policy of sticking to the vendor's use of LEDs. However, we also do not strictly
> follow that policy for other devices, e.g. the TP-Link CPE devices where one
> of the WLAN strength indicators are used for signaling.
> > Still, if the LED is assigned to USB it will at least irritate some users.
> >
> > Despite that, I remember that for TP-Link WDR3600/WDR4300 a nested
> setup was required to get USB hub working:
> >
> >
> https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/
> > ar9344_tplink_tl-wdr4300.dtsi
> >
> > Maybe you can get USB LEDs working as USB LEDs with that.
> >
> > Since you seem to keep track on your devices, I'd also be okay with
> removing the power_led alias for now, merge the device support, and then
> address the USB issue in a separate patch.
> 
> I have no strong opinion either way, as the device is inside an enclosure and
> no LEDs are visible on the outside. So feel free to remove the alias.
> 
> BR,
> Kristian

Okay, if it's not visible I do not think it's worth to deviate from normal procedure here.

I've remove the power_led label and aliases.

Feel free to test and provide an updated solution for the use as USB LED.

Despite, note that the first word after "ramips:" should be lower-case in commit title for future submissions.

Thanks for your work.

Adrian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20191103/2ae2d6d9/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list