[OpenWrt-Devel] ath10k-ct 4.19 and IBSS
Ben Greear
greearb at candelatech.com
Thu Jun 27 10:24:13 EDT 2019
On 6/27/19 7:17 AM, Koen Vandeputte wrote:
>
> On 26.06.19 18:39, Ben Greear wrote:
>> On 6/26/19 9:28 AM, Koen Vandeputte wrote:
>>>
>>> On 26.06.19 18:16, Ben Greear wrote:
>>>> On 6/26/19 2:02 AM, Koen Vandeputte wrote:
>>>>>
>>>>> On 25.06.19 15:54, Ben Greear wrote:
>>>>>>
>>>>>>
>>>>>> On 06/25/2019 02:53 AM, Koen Vandeputte wrote:
>>>>>>>
>>>>>>> On 24.06.19 22:04, Ben Greear wrote:
>>>>>>>> On 6/24/19 8:32 AM, Koen Vandeputte wrote:
>>>>>>>>> Hi Ben,
>>>>>>>>> Hi All,
>>>>>>>>>
>>>>>>>>> So I'm going to give this another try ..
>>>>>>>>> As the IBSS functionality is heavily advertised as a delta to mainline, it would be very nice to get it working also :)
>>>>>>>>>
>>>>>>>>> Testing the latest ath10k-ct driver and firmware seems to be a step back compared to roughly a month ago.
>>>>>>>>>
>>>>>>>>> I'm currently seeing the firmware crashing, which was not the case before:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ath10k-ct + htt-fw:
>>>>>>>>>
>>>>>>>>> https://pastebin.com/raw/7Sy9yx6s
>>>>>>>>
>>>>>>>> Looks like firmware ran out of some WMI event buffers and crashed instead of handling
>>>>>>>> it more gracefully.
>>>>>>>>
>>>>>>>> Please try the attached (untested) firmware and see if it behaves better.
>>>>>>>>
>>>>>>> Hi Ben,
>>>>>>>
>>>>>>> 1 step forward here.
>>>>>>>
>>>>>>> I'm not seeing crashes anymore using the test-firmware.
>>>>>>>
>>>>>>> https://pastebin.com/raw/4ZeXu7iw
>>>>>>>
>>>>>>>
>>>>>>> I've linked up 2 IBSS devices (wave 1, VHT80)
>>>>>>>
>>>>>>> OLSR traffic (UDP) works and packets here are nicely going back & forth.
>>>>>>>
>>>>>>> Simply pinging (ICMP) between the 2 devices does not work.
>>>>>>>
>>>>>>> When sending 100 pings, (64 byte large) sometimes 1 gets through .. but with a latency of > 500ms
>>>>>>>
>>>>>>>
>>>>>>> I think if the splat and the beacon spam below could be fixed .. this would be a major step forward:
>>>>>>>
>>>>>>> [ 30.328423] ------------[ cut here ]------------
>>>>>>> [ 30.333251] WARNING: CPU: 0 PID: 1578 at
>>>>>>> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-05-08-f98b6dc4/ath10k-4.19/mac.c:6563 ath10k_mac_vif_beacon_free+0xc7c/0x115c
>>>>>>> [ath10k_core]
>>>>>>> [ 30.355636] Modules linked in: mbt ath9k ath9k_common qcserial pppoe ppp_async option cdc_mbim ath9k_hw ath10k_pci ath10k_core ath usb_wwan sierra_net
>>>>>>> sierra rndis_host qmi_wwan pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables huawei_cdc_ncm
>>>>>>> ftdi_sio cfg80211 cdc_subset cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limt
>>>>>>> [ 30.427331] nls_utf8 nls_iso8859_1 nls_cp437 authenc ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base
>>>>>>> usb_common ptp pps_core mii aead crypto_null cryptomgr crc32c_generic crypto_hash
>>>>>>> [ 30.448017] CPU: 0 PID: 1578 Comm: wpa_supplicant Not tainted 4.14.129 #0
>>>>>>
>>>>>> Please look in your code and let me know the source around the line in mac.c (6563) that is splatting.
>>>>>>
>>>>>> Also, you might grab the latest ath10k-ct repo, it has a tweak that might fix the SWBA overrun
>>>>>> messages.
>>>>>>
>>>>>> https://github.com/greearb/ath10k-ct
>>>>>>
>>>>>> Thanks,
>>>>>> Ben
>>>>>>
>>>>> Hi Ben,
>>>>>
>>>>> Here is the output based on the latest git HEAD of your ct tree, combined with the test firmware:
>>>>>
>>>>> https://pastebin.com/raw/kwC6c18J
>>>>
>>>> Hello,
>>>>
>>>> The splat decode does not match the source code, so I'm not which is correct.
>>>>
>>> OpenWrt seems to add custom patches to your source.
>>>
>>> Please find the complete source in subsequent mail as being build.
>>
>> I did look in that code, and that is where I saw the mismatch. Please check your own local system
>> and see if the splat matches your code? Maybe I made some mistake of course...
>>
>> You can paste ~20 lines of code around the proper splat line and then I can find it in my
>> source...
>>
>> Thanks,
>> Ben
>>
>>
> Hi Ben,
>
> Just retried again on a slightly older commit (2019-05-08) and the splat points to another location now.
> When looking it up, it again points to the WARN_ON pointed below ..
>
> Checking shows that all calls to ath10k_mac_vif_beacon_free() calls are way above this line (highest line nr is around line1970)
> I currently can't explain where the mismatch comes from ..
>
> Current build below is just the git HEAD of openwrt 19.07 branch, cloned, build and flashed without any modification.
>
>
> [ 31.956774] WARNING: CPU: 0 PID: 1725 at
> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-05-08-f98b6dc4/ath10k-4.19/mac.c:6563
> ath10k_mac_vif_beacon_free+0xc7c/0x115c [ath10k_core]
>
>
>
> ret = ath10k_config_ps(ar);
> if (ret)
> ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n",
> arvif->vdev_id, ret);
> }
>
> if (changed & BSS_CHANGED_MCAST_RATE &&
> ---> !WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) {
> band = def.chan->band;
I think this might not be to serious of a bug, and probably does not cause any real
trouble.
It is also probably a bug in mac80211 or similar, but not certain about that.
The general set of bugs related to IBSS seem to be inability to transmit frames
sometimes (though it usually works well in my lab, so I have not been able to really
debug it).
The simpler the test case, the better. So, if you can reproduce some packet transmit
issue, preferably:
2 peers
slow speed traffic
no encryption
no funny routing (OLSR, batman, etc)
Please let me know.
And, if you cannot reproduce in this simple setup, then what
is the thing closest to this that does show the issue? I can build firmware with
verbose tx-path (and rx-path, for that matter) debugging and let you run it if you can
find a good test case, but it cannot gather useful logs at high packet transmission rates.
Thanks,
Ben
--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list