[OpenWrt-Devel] [PATCH v2] ath79: add support of Netgear WNDR3800CH
Dmitry Tunin
hanipouspilot at gmail.com
Wed Aug 7 14:59:14 EDT 2019
Add support for the ar71xx supported Netgear WNR3800CH to ath79.
The device is identical to WNDR3800 except NETGEAR_BOARD_ID.
Signed-off-by: Dmitry Tunin <hanipouspilot at gmail.com>
---
.../linux/ath79/base-files/etc/board.d/02_network | 3 +-
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 6 ++--
.../linux/ath79/dts/ar7161_netgear_wndr3800ch.dts | 36 ++++++++++++++++++++++
target/linux/ath79/image/generic.mk | 12 ++++++++
4 files changed, 54 insertions(+), 3 deletions(-)
create mode 100644 target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 84c83ff..fd66602 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -157,7 +157,8 @@ ath79_setup_interfaces()
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
- netgear,wndr3800)
+ netgear,wndr3800|\
+ netgear,wndr3800ch)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u at eth0"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index e6b6d2f..2e5f455 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -200,7 +200,8 @@ case "$FIRMWARE" in
buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700v2|\
- netgear,wndr3800)
+ netgear,wndr3800|\
+ netgear,wndr3800ch)
ath9k_eeprom_extract "art" 4096 3768
;;
dlink,dir-825-b1)
@@ -217,7 +218,8 @@ case "$FIRMWARE" in
buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700v2|\
- netgear,wndr3800)
+ netgear,wndr3800|\
+ netgear,wndr3800ch)
ath9k_eeprom_extract "art" 20480 3768
;;
dlink,dir-825-b1)
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
new file mode 100644
index 0000000..84a859b
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800ch.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7161_netgear_wndr3700.dtsi"
+
+/ {
+ compatible = "netgear,wndr3800ch", "qca,ar7161";
+ model = "Netgear WNDR3800CH";
+};
+
+&partitions {
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x050000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "u-boot-env";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+
+ partition at 70000 {
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ compatible = "netgear,uimage";
+ };
+
+ art: partition at ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index d5f67b8..b45efb1 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -647,6 +647,18 @@ define Device/netgear_wndr3800
endef
TARGET_DEVICES += netgear_wndr3800
+define Device/netgear_wndr3800ch
+ $(Device/netgear_wndr3x00)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := WNDR3800CH
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_BOARD_ID := WNDR3800CH
+ NETGEAR_HW_ID := 29763654+16+128
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += wndr3800ch
+endef
+TARGET_DEVICES += netgear_wndr3800ch
+
define Device/phicomm_k2t
ATH_SOC := qca9563
DEVICE_TITLE := Phicomm K2T
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list