[OpenWrt-Devel] [PATCH] ar71xx: add support for GL.iNet GL-X1200
John Crispin
john at phrozen.org
Tue Aug 28 03:38:39 EDT 2018
On 27/08/18 14:26, wellnw wrote:
> This patch adds supports for GL-X1200.
>
> Specification:
> - SOC: QCA9563 (775MHz)
> - Flash: 16 MiB (W25Q128FVSG)
> - RAM: 128 MiB DDR2
> - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
> - Wireless: 2.4GHz (bgn) and 5GHz (ac)
> - USB: 1x USB 2.0 port
> - Button: 1x reset button
> - LED: 8x LEDS (green)
>
> Signed-off-by: wellnw <guilin.wang at gl-inet.com>
> ---
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +
> .../linux/ar71xx/base-files/etc/board.d/02_network | 4 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 6 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.14 | 1 +
> target/linux/ar71xx/config-4.9 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-gl-x1200.c | 154 +++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/generic/config-default | 1 +
> target/linux/ar71xx/image/generic.mk | 13 ++
> 13 files changed, 201 insertions(+)
> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index af480cb..03e8157 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -408,6 +408,10 @@ gl-ar750s)
> ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
> ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
> ;;
> +gl-x1200)
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
> + ;;
this section aswell as several other places in this patch is not
alphabetically ordered. please fix all occurrences
John
> gl-mifi)
> ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
> ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 7f209fb..6cbd39d 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -455,6 +455,10 @@ ar71xx_setup_interfaces()
> ucidef_add_switch "switch0" \
> "0 at eth0" "2:lan:2" "3:lan:1" "1:wan"
> ;;
> + gl-x1200)
> + ucidef_add_switch "switch0" \
> + "0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
> + ;;
> jwap230)
> ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
> ucidef_add_switch "switch0" \
> diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> index e08df23..bee531a 100644
> --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -106,6 +106,12 @@ case "$FIRMWARE" in
> ath10kcal_extract "art" 20480 2116
> ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
> ;;
> + gl-x1200)
> + ath10kcal_extract "art" 20480 12064
> + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
> + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
> + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
> + ;;
> koala)
> ath10kcal_extract "art" 20480 2116
> ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 12) +0)
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 05f497f..383de2d 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -767,6 +767,9 @@ ar71xx_board_detect() {
> *"GL-AR750S")
> name="gl-ar750s"
> ;;
> + *"GL-X1200")
> + name="gl-x1200"
> + ;;
> *"GL-CONNECT INET v1")
> name="gl-inet"
>
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 3068aa4..312c371 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -269,6 +269,7 @@ platform_check_image() {
> gl-ar300|\
> gl-ar750|\
> gl-ar750s|\
> + gl-x1200|\
> gl-domino|\
> gl-mifi|\
> gl-usb150|\
> diff --git a/target/linux/ar71xx/config-4.14 b/target/linux/ar71xx/config-4.14
> index 535b519..3e11925 100644
> --- a/target/linux/ar71xx/config-4.14
> +++ b/target/linux/ar71xx/config-4.14
> @@ -126,6 +126,7 @@ CONFIG_ATH79=y
> # CONFIG_ATH79_MACH_GL_AR300M is not set
> # CONFIG_ATH79_MACH_GL_AR750 is not set
> # CONFIG_ATH79_MACH_GL_AR750S is not set
> +# CONFIG_ATH79_MACH_GL_X1200 is not set
> # CONFIG_ATH79_MACH_GL_DOMINO is not set
> # CONFIG_ATH79_MACH_GL_INET is not set
> # CONFIG_ATH79_MACH_GL_MIFI is not set
> diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
> index 8d25692..c06ec42 100644
> --- a/target/linux/ar71xx/config-4.9
> +++ b/target/linux/ar71xx/config-4.9
> @@ -126,6 +126,7 @@ CONFIG_ATH79=y
> # CONFIG_ATH79_MACH_GL_AR300M is not set
> # CONFIG_ATH79_MACH_GL_AR750 is not set
> # CONFIG_ATH79_MACH_GL_AR750S is not set
> +# CONFIG_ATH79_MACH_GL_X1200 is not set
> # CONFIG_ATH79_MACH_GL_DOMINO is not set
> # CONFIG_ATH79_MACH_GL_INET is not set
> # CONFIG_ATH79_MACH_GL_MIFI is not set
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index f60825a..74f7c91 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -858,6 +858,17 @@ config ATH79_MACH_GL_AR750S
> select ATH79_DEV_USB
> select ATH79_DEV_WMAC
>
> +config ATH79_MACH_GL_X1200
> + bool "GL.iNet GL-X1200 support"
> + select SOC_QCA956X
> + select ATH79_DEV_AP9X_PCI if PCI
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_GL_DOMINO
> bool "DOMINO support"
> select SOC_AR933X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 0a2fc9c..2d23bf4 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -136,6 +136,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
> obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
> obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o
> obj-$(CONFIG_ATH79_MACH_GL_AR750S) += mach-gl-ar750s.o
> +obj-$(CONFIG_ATH79_MACH_GL_X1200) += mach-gl-x1200.o
> obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
> obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
> new file mode 100644
> index 0000000..f7d1fbc
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
> @@ -0,0 +1,154 @@
> +/*
> + * GL.iNet GL-X1200 board support
> + *
> + * Copyright (C) 2018 wellnw <guilin.wang at gl-inet.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/ath9k_platform.h>
> +#include <linux/etherdevice.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/irq.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include <linux/platform_data/phy-at803x.h>
> +#include <linux/ar8216_platform.h>
> +
> +#include "common.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-spi.h"
> +#include "dev-m25p80.h"
> +#include "dev-wmac.h"
> +#include "dev-usb.h"
> +#include "machtypes.h"
> +
> +#define GL_X1200_KEYS_POLL_INTERVAL 20
> +#define GL_X1200_KEYS_DEBOUNCE_INTERVAL (3 * GL_X1200_KEYS_POLL_INTERVAL)
> +
> +#define GL_X1200_GPIO_LED_WLAN2G 19
> +#define GL_X1200_GPIO_LED_WLAN5G 20
> +#define GL_X1200_GPIO_LED_POWER 1
> +#define GL_X1200_GPIO_USB_POWER 5
> +
> +#define GL_X1200_GPIO_BTN_RESET 2
> +
> +#define GL_X1200_MAC0_OFFSET 0x0000
> +#define GL_X1200_WMAC_CALDATA_OFFSET 0x1000
> +#define GL_X1200_PCI_CALDATA_OFFSET 0x5000
> +
> +static struct spi_board_info gl_x1200_spi_info[] = {
> + {
> + .bus_num = 0,
> + .chip_select = 0,
> + .max_speed_hz = 25000000,
> + .modalias = "m25p80",
> + .platform_data = NULL,
> + },
> +};
> +
> +static struct ath79_spi_platform_data gl_x1200_spi_data = {
> + .bus_num = 0,
> + .num_chipselect = 2,
> +};
> +
> +static struct gpio_led gl_x1200_leds_gpio[] __initdata = {
> + {
> + .name = "gl-x1200:green:power",
> + .gpio = GL_X1200_GPIO_LED_POWER,
> + .default_state = LEDS_GPIO_DEFSTATE_KEEP,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:usbpower",
> + .gpio = GL_X1200_GPIO_USB_POWER,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:wlan2g",
> + .gpio = GL_X1200_GPIO_LED_WLAN2G,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:wlan5g",
> + .gpio = GL_X1200_GPIO_LED_WLAN5G,
> + .active_low = 0,
> + }
> +};
> +
> +static struct gpio_keys_button gl_x1200_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = GL_X1200_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_X1200_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> +};
> +
> +static struct ar8327_pad_cfg gl_x1200_ar8327_pad0_cfg = {
> + .mode = AR8327_PAD_MAC_SGMII,
> + .sgmii_delay_en = true,
> +};
> +
> +static struct ar8327_platform_data gl_x1200_ar8327_data = {
> + .pad0_cfg = &gl_x1200_ar8327_pad0_cfg,
> + .port0_cfg = {
> + .force_link = 1,
> + .speed = AR8327_PORT_SPEED_1000,
> + .duplex = 1,
> + .txpause = 1,
> + .rxpause = 1,
> + },
> +};
> +
> +
> +static struct mdio_board_info gl_x1200_mdio0_info[] = {
> + {
> + .bus_id = "ag71xx-mdio.0",
> + .mdio_addr = 0,
> + .platform_data = &gl_x1200_ar8327_data,
> + },
> +};
> +
> +static void __init gl_x1200_setup(void)
> +{
> + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000);
> +
> + ath79_register_spi(&gl_x1200_spi_data, gl_x1200_spi_info, 1);
> +
> + ath79_init_mac(ath79_eth0_data.mac_addr,
> + eeprom + GL_X1200_MAC0_OFFSET, 0);
> +
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> + ath79_eth0_data.phy_mask = BIT(0);
> +
> + mdiobus_register_board_info(gl_x1200_mdio0_info,
> + ARRAY_SIZE(gl_x1200_mdio0_info));
> +
> + ath79_register_mdio(0, 0x00);
> + ath79_register_eth(0);
> +
> + ath79_register_usb();
> +
> + ath79_register_wmac(eeprom + GL_X1200_WMAC_CALDATA_OFFSET, NULL);
> +
> + ap91_pci_init(eeprom + GL_X1200_PCI_CALDATA_OFFSET, NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_x1200_leds_gpio),
> + gl_x1200_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1, GL_X1200_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(gl_x1200_gpio_keys),
> + gl_x1200_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_GL_X1200, "GL-X1200", "GL-X1200",
> + gl_x1200_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index 987e80b..0919b8a 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -133,6 +133,7 @@ enum ath79_mach_type {
> ATH79_MACH_GL_AR300M, /* GL-AR300M */
> ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */
> ATH79_MACH_GL_AR750S, /* GL.iNet GL-AR750S */
> + ATH79_MACH_GL_X1200, /* GL.iNet GL-X1200 */
> ATH79_MACH_GL_DOMINO, /* Domino */
> ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> ATH79_MACH_GL_MIFI, /* GL-MIFI support */
> diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
> index 89024c1..31c4ddd 100644
> --- a/target/linux/ar71xx/generic/config-default
> +++ b/target/linux/ar71xx/generic/config-default
> @@ -96,6 +96,7 @@ CONFIG_ATH79_MACH_GL_AR300=y
> CONFIG_ATH79_MACH_GL_AR300M=y
> CONFIG_ATH79_MACH_GL_AR750=y
> CONFIG_ATH79_MACH_GL_AR750S=y
> +CONFIG_ATH79_MACH_GL_X1200=y
> CONFIG_ATH79_MACH_GL_DOMINO=y
> CONFIG_ATH79_MACH_GL_INET=y
> CONFIG_ATH79_MACH_GL_MIFI=y
> diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
> index 3b32081..03a761a 100644
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -523,6 +523,19 @@ define Device/gl-ar750s
> endef
> TARGET_DEVICES += gl-ar750s
>
> +define Device/gl-x1200
> + DEVICE_TITLE := GL.iNet GL-X1200
> + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
> + kmod-usb2 kmod-usb-storage
> + BOARDNAME := GL-X1200
> + SUPPORTED_DEVICES := gl-x1200
> + IMAGE_SIZE := 16000k
> + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
> + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
> + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
> +endef
> +TARGET_DEVICES += gl-x1200
> +
> define Device/gl-domino
> DEVICE_TITLE := GL.iNet Domino Pi
> DEVICE_PACKAGES := kmod-usb-core kmod-usb2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list