[OpenWrt-Devel] [PATCH] net: dsa: rtl8366rb: Support port 4 (WAN)

[David Miller]

From: Linus Walleij <linus.walleij at linaro.org>
Date: Wed,  8 Aug 2018 14:38:55 +0200

> The totally undocumented IO mode needs to be set to enumerator
> 0 to enable port 4 also known as WAN in most configurations,
> for ordinary traffic. The 3 bits in the register come up as
> 010 after reset, but need to be set to 000.
> 
> The Realtek source code contains a name for these bits, but
> no explanation of what the 8 different IO modes may be.
> 
> Set it to zero for the time being and drop a comment so
> people know what is going on if they run into trouble. This
> "mode zero" works fine with the D-Link DIR-685 with
> RTL8366RB.
> 
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>

Applied to net-next, thank you.

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel