[OpenWrt-Devel] [PATCH 2/2] ar71xx: allow to override at803x sgmii aneg status

John Crispin john at phrozen.org
Wed Aug 8 02:03:51 EDT 2018



On 06/08/18 16:15, David Bauer wrote:
> When checking the outcome of the PHY autonegotiation status, at803x
> currently returns false in case the SGMII side is not established.
>
> Due to a hardware-bug, ag71xx needs to fixup the SoCs SGMII side, which
> it can't as it is not aware of the link-establishment.
>
> This commit allows to ignore the SGMII side autonegotiation status to
> allow ag71xx to do the fixup work.
>
> Signed-off-by: David Bauer <mail at david-bauer.net>

comment inline ...

> ---
>   .../files/arch/mips/ath79/mach-fritz450e.c    |  1 +
>   ...at803x-add-sgmii-aneg-override-pdata.patch | 42 +++++++++++++++++++
>   2 files changed, 43 insertions(+)
>   create mode 100644 target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch
>
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
> index e48ddd65e7..4e99834d27 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
> @@ -122,6 +122,7 @@ static struct gpio_keys_button fritz450E_gpio_keys[] __initdata = {
>   static struct at803x_platform_data fritz450E_at803x_data = {
>   	.disable_smarteee = 1,
>   	.has_reset_gpio = 1,
> +	.override_sgmii_aneg = 1,
>   	.reset_gpio = FRITZ450E_GPIO_PHY_RESET,
>   };
>   
> diff --git a/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch b/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch
> new file mode 100644
> index 0000000000..9c922d155d
> --- /dev/null
> +++ b/target/linux/ar71xx/patches-4.9/903-at803x-add-sgmii-aneg-override-pdata.patch
> @@ -0,0 +1,42 @@
> +Index: linux-4.9.111/drivers/net/phy/at803x.c
> +===================================================================
> +--- linux-4.9.111.orig/drivers/net/phy/at803x.c
> ++++ linux-4.9.111/drivers/net/phy/at803x.c
> +@@ -461,12 +461,15 @@ static void at803x_link_change_notify(st
> +
> + static int at803x_aneg_done(struct phy_device *phydev)
> + {
> ++	struct at803x_platform_data *pdata;
> + 	int ccr;
> +
> + 	int aneg_done = genphy_aneg_done(phydev);
> + 	if (aneg_done != BMSR_ANEGCOMPLETE)
> + 		return aneg_done;
> +
> ++	pdata = dev_get_platdata(&phydev->mdio.dev);
> ++

use ath803_priv here and not pdata

     John

> + 	/*
> + 	 * in SGMII mode, if copper side autoneg is successful,
> + 	 * also check SGMII side autoneg result
> +@@ -481,7 +484,8 @@ static int at803x_aneg_done(struct phy_d
> + 	/* check if the SGMII link is OK. */
> + 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
> + 		pr_warn("803x_aneg_done: SGMII link is not ok\n");
> +-		aneg_done = 0;
> ++		if (!pdata || !pdata->override_sgmii_aneg)
> ++			aneg_done = 0;
> + 	}
> + 	/* switch back to copper page */
> + 	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
> +Index: linux-4.9.111/include/linux/platform_data/phy-at803x.h
> +===================================================================
> +--- linux-4.9.111.orig/include/linux/platform_data/phy-at803x.h
> ++++ linux-4.9.111/include/linux/platform_data/phy-at803x.h
> +@@ -7,6 +7,7 @@ struct at803x_platform_data {
> + 	int enable_rgmii_rx_delay:1;
> + 	int fixup_rgmii_tx_delay:1;
> + 	int has_reset_gpio:1;
> ++	int override_sgmii_aneg:1;
> + 	int reset_gpio;
> + };
> +


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list