[PATCH v4 02/15] sbi: sbi_pmu: Improve sbi_pmu_init() error handling
Atish Patra
atishp at atishpatra.org
Tue Dec 5 17:55:33 PST 2023
On Thu, Nov 30, 2023 at 4:42 AM Yu Chien Peter Lin
<peterlin at andestech.com> wrote:
>
> This patch makes the following changes:
>
> - As sbi_platform_pmu_init() returns a negative error code on
> failure, let sbi_pmu_init() print out the error code with
> sbi_dprintf().
>
> - In order to distinguish the SBI_EFAIL error returned by
> sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
> that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
> generic_pmu_init() ignores such case.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin at andestech.com>
> Reviewed-by: Anup Patel <anup at brainfault.org>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> ---
> Changes v1 -> v2:
> - New patch
> Changes v2 -> v3:
> - Include Anup's RB tag
> Changes v3 -> v4:
> - Use sbi_dprintf() instead of hang on error
> - Include Prabhakar's RB tag
> ---
> lib/sbi/sbi_pmu.c | 6 +++++-
> lib/utils/fdt/fdt_pmu.c | 2 +-
> platform/generic/platform.c | 8 +++++++-
> 3 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
> index 185068b..2ee6e62 100644
> --- a/lib/sbi/sbi_pmu.c
> +++ b/lib/sbi/sbi_pmu.c
> @@ -957,6 +957,7 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
> int hpm_count = sbi_fls(sbi_hart_mhpm_mask(scratch));
> struct sbi_pmu_hart_state *phs;
> const struct sbi_platform *plat;
> + int rc;
>
> if (cold_boot) {
> hw_event_map = sbi_calloc(sizeof(*hw_event_map),
> @@ -972,7 +973,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
>
> plat = sbi_platform_ptr(scratch);
> /* Initialize hw pmu events */
> - sbi_platform_pmu_init(plat);
> + rc = sbi_platform_pmu_init(plat);
> + if (rc)
> + sbi_dprintf("%s: platform pmu init failed "
> + "(error %d)\n", __func__, rc);
>
> /* mcycle & minstret is available always */
> if (!hpm_count)
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index 83301bb..a8d7648 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -74,7 +74,7 @@ int fdt_pmu_setup(void *fdt)
>
> pmu_offset = fdt_node_offset_by_compatible(fdt, -1, "riscv,pmu");
> if (pmu_offset < 0)
> - return SBI_EFAIL;
> + return SBI_ENOENT;
>
> event_ctr_map = fdt_getprop(fdt, pmu_offset,
> "riscv,event-to-mhpmcounters", &len);
> diff --git a/platform/generic/platform.c b/platform/generic/platform.c
> index 85acecd..fa400b9 100644
> --- a/platform/generic/platform.c
> +++ b/platform/generic/platform.c
> @@ -265,7 +265,13 @@ static u32 generic_tlb_num_entries(void)
>
> static int generic_pmu_init(void)
> {
> - return fdt_pmu_setup(fdt_get_address());
> + int rc;
> +
> + rc = fdt_pmu_setup(fdt_get_address());
> + if (rc && rc != SBI_ENOENT)
> + return rc;
> +
> + return 0;
> }
>
> static uint64_t generic_pmu_xlate_to_mhpmevent(uint32_t event_idx,
> --
> 2.34.1
>
Reviewed-by: Atish Patra <atishp at rivosinc.com>
--
Regards,
Atish
More information about the opensbi
mailing list