[PATCH v3] lib: utils: Add LiteX UART support

Gabriel Somlo gsomlo at gmail.com
Fri Nov 12 07:03:13 PST 2021


This patch adds support for the UART provided by the LiteX
SoC framework (https://github.com/enjoy-digital/litex),
based its FDT info described in the Linux sources at
Documentation/devicetree/bindings/serial/litex,liteuart.yaml).

Signed-off-by: Gabriel Somlo <gsomlo at gmail.com>
---

New in v3:
	- less verbose / more concise commit blurb :)
	- fixed serial_litex_init() alignment
	- fixed `uart_base` pointer arithmetic
	- treat single-bit registers as Boolean
	- removed access to `event` (irq-related) register
	  (not needed since UART is operated in polling mode)

> New in v2:
>	- remove properties (and parameters) not actually used by the
>	  LiteX UART
>	- remove redundant parentheses from pointer arithmetic
>	  (thanks jrtc27!)
>
>> See https://github.com/litex-hub/linux-on-litex-rocket for instructions
>> on how to build a LiteX+Rocket bitstream for e.g. the nexys4ddr (Xilinx
>> Artix7 FPGA dev board), and https://pastebin.com/nu1dSE16 for a demo of
>> the board booting a linux payload via opensbi, using this patch.

 include/sbi_utils/fdt/fdt_helper.h    |  3 ++
 include/sbi_utils/serial/litex-uart.h | 17 ++++++++
 lib/utils/fdt/fdt_helper.c            | 19 ++++++++
 lib/utils/serial/fdt_serial.c         |  2 +
 lib/utils/serial/fdt_serial_litex.c   | 35 +++++++++++++++
 lib/utils/serial/litex-uart.c         | 62 +++++++++++++++++++++++++++
 lib/utils/serial/objects.mk           |  2 +
 7 files changed, 140 insertions(+)
 create mode 100644 include/sbi_utils/serial/litex-uart.h
 create mode 100644 lib/utils/serial/fdt_serial_litex.c
 create mode 100644 lib/utils/serial/litex-uart.c

diff --git a/include/sbi_utils/fdt/fdt_helper.h b/include/sbi_utils/fdt/fdt_helper.h
index 24fee7a..5f75f07 100644
--- a/include/sbi_utils/fdt/fdt_helper.h
+++ b/include/sbi_utils/fdt/fdt_helper.h
@@ -62,6 +62,9 @@ int fdt_parse_shakti_uart_node(void *fdt, int nodeoffset,
 int fdt_parse_sifive_uart_node(void *fdt, int nodeoffset,
 			       struct platform_uart_data *uart);
 
+int fdt_parse_litex_uart_node(void *fdt, int nodeoffset,
+			      struct platform_uart_data *uart);
+
 int fdt_parse_uart8250_node(void *fdt, int nodeoffset,
 			    struct platform_uart_data *uart);
 
diff --git a/include/sbi_utils/serial/litex-uart.h b/include/sbi_utils/serial/litex-uart.h
new file mode 100644
index 0000000..91ab644
--- /dev/null
+++ b/include/sbi_utils/serial/litex-uart.h
@@ -0,0 +1,17 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2021 Gabriel Somlo
+ *
+ * Authors:
+ *   Gabriel Somlo <gsomlo at gmail.com>
+ */
+
+#ifndef __SERIAL_LITEX_UART_H__
+#define __SERIAL_LITEX_UART_H__
+
+#include <sbi/sbi_types.h>
+
+int litex_uart_init(unsigned long base);
+
+#endif
diff --git a/lib/utils/fdt/fdt_helper.c b/lib/utils/fdt/fdt_helper.c
index 5bf4021..a42f53b 100644
--- a/lib/utils/fdt/fdt_helper.c
+++ b/lib/utils/fdt/fdt_helper.c
@@ -403,6 +403,25 @@ int fdt_parse_sifive_uart_node(void *fdt, int nodeoffset,
 	return 0;
 }
 
+int fdt_parse_litex_uart_node(void *fdt, int nodeoffset,
+			      struct platform_uart_data *uart)
+{
+	int rc;
+	uint64_t reg_addr, reg_size;
+
+	if (nodeoffset < 0 || !uart || !fdt)
+		return SBI_ENODEV;
+
+	rc = fdt_get_node_addr_size(fdt, nodeoffset, 0, &reg_addr, &reg_size);
+	if (rc < 0 || !reg_addr || !reg_size)
+		return SBI_ENODEV;
+	uart->addr = reg_addr;
+
+	/* LiteX UART has no further configurable properties */
+
+	return 0;
+}
+
 int fdt_parse_uart8250_node(void *fdt, int nodeoffset,
 			    struct platform_uart_data *uart)
 {
diff --git a/lib/utils/serial/fdt_serial.c b/lib/utils/serial/fdt_serial.c
index cedda04..f73d26a 100644
--- a/lib/utils/serial/fdt_serial.c
+++ b/lib/utils/serial/fdt_serial.c
@@ -15,6 +15,7 @@
 
 extern struct fdt_serial fdt_serial_uart8250;
 extern struct fdt_serial fdt_serial_sifive;
+extern struct fdt_serial fdt_serial_litex;
 extern struct fdt_serial fdt_serial_htif;
 extern struct fdt_serial fdt_serial_shakti;
 extern struct fdt_serial fdt_serial_gaisler;
@@ -22,6 +23,7 @@ extern struct fdt_serial fdt_serial_gaisler;
 static struct fdt_serial *serial_drivers[] = {
 	&fdt_serial_uart8250,
 	&fdt_serial_sifive,
+	&fdt_serial_litex,
 	&fdt_serial_htif,
 	&fdt_serial_shakti,
 	&fdt_serial_gaisler
diff --git a/lib/utils/serial/fdt_serial_litex.c b/lib/utils/serial/fdt_serial_litex.c
new file mode 100644
index 0000000..0fa5777
--- /dev/null
+++ b/lib/utils/serial/fdt_serial_litex.c
@@ -0,0 +1,35 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2021 Gabriel Somlo
+ *
+ * Authors:
+ *   Gabriel Somlo <gsomlo at gmail.com>
+ */
+
+#include <sbi_utils/fdt/fdt_helper.h>
+#include <sbi_utils/serial/fdt_serial.h>
+#include <sbi_utils/serial/litex-uart.h>
+
+static int serial_litex_init(void *fdt, int nodeoff,
+			     const struct fdt_match *match)
+{
+	int rc;
+	struct platform_uart_data uart;
+
+	rc = fdt_parse_litex_uart_node(fdt, nodeoff, &uart);
+	if (rc)
+		return rc;
+
+	return litex_uart_init(uart.addr);
+}
+
+static const struct fdt_match serial_litex_match[] = {
+	{ .compatible = "litex,liteuart" },
+	{ },
+};
+
+struct fdt_serial fdt_serial_litex = {
+	.match_table = serial_litex_match,
+	.init = serial_litex_init
+};
diff --git a/lib/utils/serial/litex-uart.c b/lib/utils/serial/litex-uart.c
new file mode 100644
index 0000000..e35fbe8
--- /dev/null
+++ b/lib/utils/serial/litex-uart.c
@@ -0,0 +1,62 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2021 Gabriel Somlo
+ *
+ * Authors:
+ *   Gabriel Somlo <gsomlo at gmail.com>
+ */
+
+#include <sbi/riscv_io.h>
+#include <sbi/sbi_console.h>
+#include <sbi_utils/serial/litex-uart.h>
+
+/* clang-format off */
+
+#define UART_REG_RXTX		0
+#define UART_REG_TXFULL		1
+#define UART_REG_RXEMPTY	2
+#define UART_REG_EV_STATUS	3
+#define UART_REG_EV_PENDING	4
+#define UART_REG_EV_ENABLE	5
+
+/* clang-format on */
+
+static volatile u32 *uart_base;
+
+static u8 get_reg(u8 reg)
+{
+	return readb(uart_base + reg);
+}
+
+static void set_reg(u8 reg, u8 val)
+{
+	writeb(val, uart_base + reg);
+}
+
+static void litex_uart_putc(char ch)
+{
+	while (get_reg(UART_REG_TXFULL));
+	set_reg(UART_REG_RXTX, ch);
+}
+
+static int litex_uart_getc(void)
+{
+	if (get_reg(UART_REG_RXEMPTY))
+		return -1;
+	else
+		return get_reg(UART_REG_RXTX);
+}
+
+static struct sbi_console_device litex_console = {
+	.name = "litex_uart",
+	.console_putc = litex_uart_putc,
+	.console_getc = litex_uart_getc
+};
+
+int litex_uart_init(unsigned long base)
+{
+	uart_base = (volatile u32 *)base;
+	sbi_console_set_device(&litex_console);
+	return 0;
+}
diff --git a/lib/utils/serial/objects.mk b/lib/utils/serial/objects.mk
index 9fb0902..4f751ba 100644
--- a/lib/utils/serial/objects.mk
+++ b/lib/utils/serial/objects.mk
@@ -12,8 +12,10 @@ libsbiutils-objs-y += serial/fdt_serial_gaisler.o
 libsbiutils-objs-y += serial/fdt_serial_htif.o
 libsbiutils-objs-y += serial/fdt_serial_shakti.o
 libsbiutils-objs-y += serial/fdt_serial_sifive.o
+libsbiutils-objs-y += serial/fdt_serial_litex.o
 libsbiutils-objs-y += serial/fdt_serial_uart8250.o
 libsbiutils-objs-y += serial/gaisler-uart.o
 libsbiutils-objs-y += serial/shakti-uart.o
 libsbiutils-objs-y += serial/sifive-uart.o
+libsbiutils-objs-y += serial/litex-uart.o
 libsbiutils-objs-y += serial/uart8250.o
-- 
2.31.1




More information about the opensbi mailing list