[PATCH v4] platform: sifive_fu740: add platform reset driver
Heinrich Schuchardt
heinrich.schuchardt at canonical.com
Wed Nov 10 02:11:04 PST 2021
On 11/10/21 10:42, Nikita Shubin wrote:
> From: Nikita Shubin <n.shubin at yadro.com>
>
> da9063 PMIC can be used to reset/shutdown the
> Sifive Unmatched board.
>
> shutdown is done simply by writing SHUTDOWN bit to
> DA9063_REG_CONTROL_F register.
>
> reset via setting WAKEUP bit in DA9063_REG_CONTROL_F
> register followed by masking POWER and POWER1 domains
> and setting STANDBY bit in DA9063_REG_CONTROL_A,
> originally discovered by Alexandre Ghiti on linux-riscv
> maillists.
>
> Tested-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> Reviewed-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
> Tested-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
I would not copy Tested-by: and Reviewed-by: if a patch has changed
significantly (e.g. putting the code into other files).
For patches 1-5 the only differences are fixed comment typos. There it
is ok for me to copy the Reviewed-by:.
I have tested the new series and found no issues.
Tested-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> Signed-off-by: Nikita Shubin <n.shubin at yadro.com>
> ---
> v3->v4:
> - moved all code to generic/sifive_fu740.c
> ---
> platform/generic/sifive_fu740.c | 192 ++++++++++++++++++++++++++++++++
> 1 file changed, 192 insertions(+)
>
> diff --git a/platform/generic/sifive_fu740.c b/platform/generic/sifive_fu740.c
> index c8325d3..dde5926 100644
> --- a/platform/generic/sifive_fu740.c
> +++ b/platform/generic/sifive_fu740.c
> @@ -2,14 +2,190 @@
> * SPDX-License-Identifier: BSD-2-Clause
> *
> * Copyright (c) 2021 SiFive
> + * Copyright (c) 2021 YADRO
> *
> * Authors:
> * David Abdurachmanov <david.abdurachmanov at sifive.com>
> + * Nikita Shubin <n.shubin at yadro.com>
> */
>
> #include <platform_override.h>
> +#include <libfdt.h>
> +#include <sbi/sbi_error.h>
> +#include <sbi/sbi_system.h>
> +#include <sbi/sbi_console.h>
> #include <sbi_utils/fdt/fdt_helper.h>
> #include <sbi_utils/fdt/fdt_fixup.h>
> +#include <sbi_utils/reset/fdt_reset.h>
> +#include <sbi_utils/i2c/fdt_i2c.h>
> +
> +#define DA9063_REG_PAGE_CON 0x00
> +#define DA9063_REG_CONTROL_A 0x0e
> +#define DA9063_REG_CONTROL_F 0x13
> +#define DA9063_REG_DEVICE_ID 0x81
> +
> +#define DA9063_CONTROL_A_M_POWER1_EN (1 << 6)
> +#define DA9063_CONTROL_A_M_POWER_EN (1 << 5)
> +#define DA9063_CONTROL_A_STANDBY (1 << 3)
> +
> +#define DA9063_CONTROL_F_WAKEUP (1 << 2)
> +#define DA9063_CONTROL_F_SHUTDOWN (1 << 1)
> +
> +#define PMIC_CHIP_ID_DA9063 0x61
> +
> +static struct {
> + struct i2c_adapter *adapter;
> + uint32_t reg;
> +} da9063;
> +
> +static int da9063_system_reset_check(u32 type, u32 reason)
> +{
> + switch (type) {
> + case SBI_SRST_RESET_TYPE_SHUTDOWN:
> + return 1;
> + case SBI_SRST_RESET_TYPE_COLD_REBOOT:
> + case SBI_SRST_RESET_TYPE_WARM_REBOOT:
> + return 255;
> + }
> +
> + return 0;
> +}
> +
> +static inline int da9063_sanity_check(struct i2c_adapter *adap, uint32_t reg)
> +{
> + uint8_t val;
> + int rc = i2c_adapter_reg_write(adap, reg, DA9063_REG_PAGE_CON, 0x02);
> +
> + if (rc)
> + return rc;
> +
> + /* check set page*/
> + rc = i2c_adapter_reg_read(adap, reg, 0x0, &val);
> + if (rc)
> + return rc;
> +
> + if (val != 0x02)
> + return SBI_ENODEV;
> +
> + /* read and check device id */
> + rc = i2c_adapter_reg_read(adap, reg, DA9063_REG_DEVICE_ID, &val);
> + if (rc)
> + return rc;
> +
> + if (val != PMIC_CHIP_ID_DA9063)
> + return SBI_ENODEV;
> +
> + return 0;
> +}
> +
> +static inline int da9063_shutdown(struct i2c_adapter *adap, uint32_t reg)
> +{
> + int rc = i2c_adapter_reg_write(adap, da9063.reg, DA9063_REG_PAGE_CON, 0x00);
> +
> + if (rc)
> + return rc;
> +
> + return i2c_adapter_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_F, DA9063_CONTROL_F_SHUTDOWN);
> +}
> +
> +static inline int da9063_reset(struct i2c_adapter *adap, uint32_t reg)
> +{
> + int rc = i2c_adapter_reg_write(adap, da9063.reg, DA9063_REG_PAGE_CON, 0x00);
> +
> + if (rc)
> + return rc;
> +
> + rc = i2c_adapter_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_F, DA9063_CONTROL_F_WAKEUP);
> + if (rc)
> + return rc;
> +
> + return i2c_adapter_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_A,
> + DA9063_CONTROL_A_M_POWER1_EN |
> + DA9063_CONTROL_A_M_POWER_EN |
> + DA9063_CONTROL_A_STANDBY);
> +}
> +
> +static void da9063_system_reset(u32 type, u32 reason)
> +{
> + struct i2c_adapter *adap = da9063.adapter;
> + uint32_t reg = da9063.reg;
> + int rc;
> +
> + if (adap) {
> + /* sanity check */
> + rc = da9063_sanity_check(adap, reg);
> + if (rc) {
> + sbi_printf("%s: chip is not da9063 PMIC\n", __func__);
> + goto skip_reset;
> + }
> +
> + switch (type) {
> + case SBI_SRST_RESET_TYPE_SHUTDOWN:
> + da9063_shutdown(adap, reg);
> + break;
> + case SBI_SRST_RESET_TYPE_COLD_REBOOT:
> + case SBI_SRST_RESET_TYPE_WARM_REBOOT:
> + da9063_reset(adap, reg);
> + break;
> + }
> +
> + while
> + (1);
> +skip_reset:
> + }
> +
> + sbi_hart_hang();
> +}
> +
> +static struct sbi_system_reset_device da9063_reset_i2c = {
> + .name = "da9063-reset",
> + .system_reset_check = da9063_system_reset_check,
> + .system_reset = da9063_system_reset
> +};
> +
> +static int da9063_reset_init(void *fdt, int nodeoff,
> + const struct fdt_match *match)
> +{
> + int rc, i2c_bus;
> + struct i2c_adapter *adapter;
> + uint64_t addr;
> +
> + /* we are dlg,da9063 node */
> + rc = fdt_get_node_addr_size(fdt, nodeoff, 0, &addr, NULL);
> + if (rc)
> + return rc;
> +
> + da9063.reg = addr;
> +
> + /* find i2c bus parent node */
> + i2c_bus = fdt_parent_offset(fdt, nodeoff);
> + if (i2c_bus < 0)
> + return i2c_bus;
> +
> + /* i2c adapter get */
> + rc = fdt_i2c_adapter_get(fdt, i2c_bus, &adapter);
> + if (rc)
> + return rc;
> +
> + da9063.adapter = adapter;
> +
> + sbi_system_reset_add_device(&da9063_reset_i2c);
> +
> + return 0;
> +}
> +
> +static const struct fdt_match da9063_reset_match[] = {
> + { .compatible = "dlg,da9063", .data = (void *)TRUE },
> + { },
> +};
> +
> +struct fdt_reset fdt_reset_da9063 = {
> + .match_table = da9063_reset_match,
> + .init = da9063_reset_init,
> +};
>
> static u64 sifive_fu740_tlbr_flush_limit(const struct fdt_match *match)
> {
> @@ -23,6 +199,21 @@ static u64 sifive_fu740_tlbr_flush_limit(const struct fdt_match *match)
> return 0;
> }
>
> +static int sifive_fu740_final_init(bool cold_boot, const struct fdt_match *)
> +{
> + int rc;
> + void *fdt = fdt_get_address();
> +
> + if (cold_boot) {
> + rc = fdt_reset_driver_init(fdt, &fdt_reset_da9063);
> + if (rc)
> + sbi_printf("%s: failed to find da9063 for reset\n",
> + __func__);
> + }
> +
> + return 0;
> +}
> +
> static const struct fdt_match sifive_fu740_match[] = {
> { .compatible = "sifive,fu740" },
> { .compatible = "sifive,fu740-c000" },
> @@ -33,4 +224,5 @@ static const struct fdt_match sifive_fu740_match[] = {
> const struct platform_override sifive_fu740 = {
> .match_table = sifive_fu740_match,
> .tlbr_flush_limit = sifive_fu740_tlbr_flush_limit,
> + .final_init = sifive_fu740_final_init,
> };
>
More information about the opensbi
mailing list