Problem connecting to VPN

[David Woodhouse]

On Tue, 2016-09-27 at 18:33 -0500, Alex Branham wrote:
> 
> 
> I'm attempting to connect to my school's vpn and it's not working
> quite as I imagined. I run "sudo openconnect vpn.utexas.edu" and
> enter in my username, password, and two-factor authentication. It
> then prints out:
> 
> Got CONNECT response: HTTP/1.1 200 OK
> CSTP connected. DPD 0, Keepalive 20
> Set up DTLS failed; using SSL instead
> Connected as 172.29.230.252, using SSL
> 
> And this gets added to the output of "ip addr":
> 
> 4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1406 qdisc fq_codel state UNKNOWN group default qlen 500
>     link/none 
>     inet 172.29.230.252/32 scope global tun0
>        valid_lft forever preferred_lft forever
>     inet6 fe80::d2fa:6c92:c9ee:d6d/64 scope link flags 800 
>        valid_lft forever preferred_lft forever
> 
> I'm running Arch linux with openconnect v7.07. Any help is much appreciated!

Can you elaborate on what it is that you didn't expect?

Is it just the lack of DTLS? Is everything actually working apart from
that?

Or do you not have routes to the VPN? Can you not ping machines on the
VPN by their IP address?

Or do you not have DNS?

Or did a pixie jump out from under the table at this point and run away
with your laptop...?

-- 
dwmw2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5760 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openconnect-devel/attachments/20160928/f8f060c6/attachment.bin>