radiusclient dosnt send cleartext password to radius server

[Mani Behrouz]

May  2 19:26:24 iceserver ocserv[4543]: sec-mod: using 'radius'
authentication to authenticate user (session: hnLkk)
May  2 19:26:25 iceserver ocserv[4543]: radius-auth: communicating
username (test) and password
May  2 19:26:26 iceserver ocserv[4543]: rc_check_reply: received
invalid reply digest from RADIUS server
May  2 19:26:26 iceserver ocserv[4543]: radius-auth: communicating
username (test) and password
May  2 19:26:27 iceserver ocserv[4543]: rc_check_reply: received
invalid reply digest from RADIUS server
May  2 19:26:27 iceserver ocserv[4543]: radius-auth: communicating
username (test) and password
May  2 19:26:28 iceserver ocserv[4543]: rc_check_reply: received
invalid reply digest from RADIUS server

Message from syslogd at iceserver at May  2 19:26:28 ...
 ocserv[4543]: radius-auth: error authenticating user 'test'

Broadcast message from systemd-journald at iceserver (Sat 2015-05-02
19:26:28 CEST):

ocserv[4543]: radius-auth: error authenticating user 'test'

May  2 19:26:28 iceserver ocserv[4543]: sec-mod: error processing data
for 'sm: auth cont' command (-3)
May  2 19:26:28 iceserver ocserv[4580]: worker[test]: 5.*.*.*
worker-auth.c:1403: failed authentication for 'test'
May  2 19:26:28 iceserver ocserv[4542]: main: 5.*.*.*:19503 user disconnected


On Sat, May 2, 2015 at 9:55 PM, Mani Behrouz <manibehrouz2 at gmail.com> wrote:
> I have install from repo. but it dosnt send password in cleartext type
> to radius server
> I have also installed ocserv 0.10.4 in other server but it's fine. I
> have this issue with repo build
>
>  User-Name = "test"
>         User-Password = "\377\236\337ƿ7&/(+\037;!Y\366\230"
>         Calling-Station-Id = "5.*.*.*"
>         Service-Type = Authenticate-Only
>         NAS-Port = 0
>         NAS-IP-Address = 178.*.*.*