ocserv segfault when nas-identifier value is empty

[Nikos Mavrogiannopoulos]

On Thu, Aug 27, 2015 at 1:57 PM, Niels Peen <niels at peen.ch> wrote:
> Not something many will run into, but I noticed ocserv will segfault when the nas-identifier parameter is specified but accidentally left empty:
> auth = "radius[config=/etc/radiusclient/radiusclient.conf,nas-identifier=]"
> acct = "radius[config=/etc/radiusclient/radiusclient.conf,nas-identifier=]”

Thanks. Should be fixed now.

regards,
Nikos