[PATCH ocserv] doc/ocserv.1 is generated, don't track it

[Jason Cooper]

Signed-off-by: Jason Cooper <jason at lakedaemon.net>
---
It looks like this was originally the case, but wasn't updated once a separate
doc/ dir was created.  Or, .gitignore had a typo.  In either case, this fixes it.

 .gitignore   |    2 +-
 doc/ocserv.1 |  314 ----------------------------------------------------------
 2 files changed, 1 insertion(+), 315 deletions(-)
 delete mode 100644 doc/ocserv.1

diff --git a/.gitignore b/.gitignore
index c9822cf..5430faf 100644
--- a/.gitignore
+++ b/.gitignore
@@ -20,7 +20,7 @@ gl/libgnu.a
 gl/arg-nonnull.h
 gl/warn-on-use.h
 gl/c++defs.h
-src/ocserv.1
+doc/ocserv.1
 libopts/libopts.a
 gl/time.h
 gl/sys/time.h
diff --git a/doc/ocserv.1 b/doc/ocserv.1
deleted file mode 100644
index 65c5bbb..0000000
--- a/doc/ocserv.1
+++ /dev/null
@@ -1,314 +0,0 @@
-.TH ocserv 1 "24 Feb 2013" "0.0.1" "User Commands"
-.\"
-.\"  DO NOT EDIT THIS FILE   (ocserv-args.man)
-.\"  
-.\"  It has been AutoGen-ed  February 24, 2013 at 11:24:04 AM by AutoGen 5.16
-.\"  From the definitions    ../src/ocserv-args.def.tmp
-.\"  and the template file   agman-cmd.tpl
-.\"
-.SH NAME
-ocserv \- OpenConnect server
-.SH SYNOPSIS
-.B ocserv
-.\" Mixture of short (flag) options and long options
-.RB [ \-\fIflag\fP " [\fIvalue\fP]]... [" \-\-\fIopt\-name\fP " [[=| ]\fIvalue\fP]]..."
-.PP
-All arguments must be options.
-.PP
-.SH "DESCRIPTION"
-This program is openconnect VPN server (ocserv), a server compatible with the
-openconnect VPN client. It is believed to be compatible with the protocol
-used by CISCO's AnyConnect SSL VPN.
-Multiple authentication methods are available including PAM and certificate
-authentication.
-Authenticated users are assigned an unprivileged worker process and obtain 
-a networking (tun) device and IP from a configurable pool of addresses.
-.SH "OPTIONS"
-.TP
-.BR \-f ", " -\-foreground
-Do not fork into background.
-.sp
-.TP
-.BR \-\-tls\-debug
-Enable verbose TLS debugging information.
-.sp
-.TP
-.BR \-d ", " -\-debug
-Enable verbose network debugging information.
-.sp
-.TP
-.BR \-c " \fIfile\fP, " \-\-config "=" \fIfile\fP
-Configuration file for the server.
-.sp
-.TP
-.BR \-h , " \-\-help"
-Display usage information and exit.
-.TP
-.BR \-! , " \-\-more-help"
-Pass the extended usage information through a pager.
-.TP
-.BR \-v " [{\fIv|c|n\fP}]," " \-\-version" "[=\fI{v|c|n}\fP]"
-Output version of program and exit.  The default mode is `v', a simple
-version.  The `c' mode will print copyright information and `n' will
-print the full copyright notice.
-.SH AUTHENTICATION
-Users can be authenticated in multiple ways, which are explained in the following
-paragraphs. Once authenticated users can be disconnected by killing their worker process. 
-The pid of that process is available from the command 'who \-u' if utmp logging is enabled.
-.sp
-.br
-\fBPassword authentication\fP
-.br
-If your system supports Pluggable Authentication Modules (PAM), then
-ocserv will take advantage of it to password authenticate its users.
-It can be used in conjunction with certificate authentication.
-.sp
-.br
-\fBCertificate authentication\fP
-.br
-In order to support certificate authentication you will need in addition to 
-the server certificate and key for TLS, a certificate authority (CA) to sign
-certificates for the clients. That authority should also provide a CRL to
-allow the server to reject the revoked clients (see \fBca\-cert, crl\fP).
-.sp
-Each client will then hold a key and certificate that identifies him.
-The user ID of the client must be embedded in the certificate's Distinguished
-Name (DN), e.g. in the Common Name, or UID fields. For the server to
-read the name, the \fBcert\-user\-oid\fP configuration option must be set.
-.sp
-The following examples demonstrate how to use certtool from GnuTLS to
-generate such CA.
-.sp
-.br
-\fBGenerating the CA\fP
-.br
-.br
-.in +4
-.nf
-$ certtool \-\-generate\-privkey \-\-outfile ca\-key.pem
-$ cat << _EOF_ >ca.tmpl
-cn = "VPN CA"
-organization = "Big Corp"
-serial = 1
-expiration_days = 9999
-ca
-signing_key
-cert_signing_key
-crl_signing_key
-_EOF_
-$ certtool \-\-generate\-self\-signed \-\-load\-privkey ca\-key.pem \
--\-template ca.tmpl \-\-outfile ca\-cert.pem
-.in -4
-.fi
-.sp
-.br
-\fBGenerating the client certificates\fP
-.br
-.br
-.in +4
-.nf
-$ certtool \-\-generate\-privkey \-\-outfile user\-key.pem
-$ cat << _EOF_ >user.tmpl
-cn = "user"
-ou = "admins"
-serial = 1824
-email = "user at example.com"
-expiration_days = 9999
-signing_key
-tls_www_client
-_EOF_
-$ certtool \-\-generate\-certificate \-\-load\-privkey user\-key.pem \
--\-load\-ca\-certificate ca\-cert.pem \-\-load\-ca\-privkey ca\-key.pem \
--\-template user.tmpl \-\-outfile user\-cert.pem
-.sp
-.in -4
-.fi
-.sp
-.br
-\fBRevoking a client certificate\fP
-.br
-To revoke the previous client certificate use:
-.br
-.in +4
-.nf
-$ cat user\-cert.pem >>revoked.pem
-$ certtool \-\-generate\-crl \-\-load\-ca\-privkey ca\-key.pem \
--\-load\-ca\-certificate ca.pem \-\-load\-certificate revoked.pem \
--\-outfile crl.pem
-.in -4
-.fi
-After that you may want to notify ocserv of the new CRL by using
-the HUP signal.
-.sp
-.SH "IMPLEMENTATION NOTES"
-Note that while this server utilizes privilege separation for password
-authentication, this does not apply for TLS and client certificate authentication.
-This has the advantage of spreading TLS calculations to multiple workers (i.e. cores)
-if available, but at the cost of each worker having a copy of the server's 
-private key.
-.SH FILES
-.br
-\fBocserv's configuration file format\fP
-.br
-By default, if no other file is specified, ocserv looks for its configuration file at \fI/etc/ocserv.conf\fP.
-An example configuration file follows.
-.sp
-.br
-.in +4
-.nf
-.sp
-# User authentication method. Could be set multiple times and in that case
-# all should succeed.
-# Options: certificate, pam. 
-#auth = "certificate"
-auth = "pam"
-.sp
-# Use listen\-host to limit to specific IPs or to the IPs of a provided hostname.
-#listen\-host = [IP|HOSTNAME]
-.sp
-# Limit the number of clients. Unset or set to zero for unlimited.
-#max\-clients = 1024
-max\-clients = 16
-.sp
-# Limit the number of identical clients (i.e., users connecting multiple times)
-# Unset or set to zero for unlimited.
-max\-same\-clients = 2
-.sp
-# TCP and UDP port number
-tcp\-port = 3333
-udp\-port = 3333
-.sp
-# Keepalive in seconds
-keepalive = 32400
-.sp
-# Dead peer detection in seconds
-dpd = 240
-.sp
-# MTU discovery (DPD must be enabled)
-try\-mtu\-discovery = false
-.sp
-# The key and the certificates of the server
-# The key may be a file, or any URL supported by GnuTLS (e.g., 
-# tpmkey:uuid=xxxxxxx\-xxxx\-xxxx\-xxxx\-xxxxxxxx;storage=user
-# or pkcs11:object=my\-vpn\-key;object\-type=private)
-server\-cert = /path/to/cert.pem
-server\-key = /path/to/key.pem
-.sp
-# In case PKCS #11 or TPM keys are used the PINs should be available
-# in files. The srk\-pin\-file is applicable to TPM keys only, and is the 
-# storage root key.
-#pin\-file = /path/to/pin.txt
-#srk\-pin\-file = /path/to/srkpin.txt
-.sp
-# The Certificate Authority that will be used
-# to verify clients if certificate authentication
-# is set.
-#ca\-cert = /path/to/ca.pem
-.sp
-# The object identifier that will be used to read the user ID in the client certificate.
-# The object identifier should be part of the certificate's DN
-# Useful OIDs are: 
-#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1
-#cert\-user\-oid = 0.9.2342.19200300.100.1.1
-.sp
-# The object identifier that will be used to read the user group in the client 
-# certificate. The object identifier should be part of the certificate's DN
-# Useful OIDs are: 
-#  OU (organizational unit) = 2.5.4.11 
-#cert\-group\-oid = 2.5.4.11
-.sp
-# The revocation list of the certificates issued by the 'ca\-cert' above.
-#crl = /path/to/crl.pem
-.sp
-# GnuTLS priority string
-tls\-priorities = "PERFORMANCE:%SERVER_PRECEDENCE"
-.sp
-# The time (in seconds) that a client is allowed to stay connected prior
-# to authentication
-auth\-timeout = 40
-.sp
-# Cookie validity time (in seconds)
-# Once a client is authenticated he's provided a cookie with
-# which he can reconnect. This option sets the maximum lifetime
-# of that cookie.
-cookie\-validity = 43200
-.sp
-# A cookie database. If not set cookies are stored in memory and
-# server restarts won't preserve them.
-#cookie\-db = /var/tmp/cookies.db
-.sp
-# Script to call when a client connects and obtains an IP
-# Parameters are passed on the environment.
-# USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client), 
-# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP
-# in the P\-t\-P connection), IP_REMOTE (the VPN IP of the client).
-#connect\-script = /usr/bin/myscript
-#disconnect\-script = /usr/bin/myscript
-.sp
-# UTMP
-use\-utmp = true
-.sp
-# PID file
-pid\-file = /var/run/ocserv.pid
-.sp
-# The user the worker processes will be run as.
-run\-as\-user = nobody
-run\-as\-group = nogroup
-.sp
-#
-# Network settings
-#
-.sp
-# The name of the tun device
-device = vpns
-.sp
-# The pool of addresses that leases will be given from.
-ipv4\-network = 192.168.1.0
-ipv4\-netmask = 255.255.255.0
-.sp
-# The DNS advertized server
-# Use the keywork local to advertize the local P\-t\-P address as DNS server
-# ipv4\-dns = 192.168.2.1
-ipv4\-dns = local
-.sp
-# The NBNS server (if any)
-#ipv4\-nbns = 192.168.2.3
-.sp
-# The same, but for IPv6.
-#ipv6\-address = 
-#ipv6\-mask = 
-#ipv6\-dns = 
-#ipv6\-nbns = 
-.sp
-# Unset to assign the default MTU of the device
-# mtu = 
-.sp
-# Routes to be forwarded to the client. If you need the
-# client to forward routes to the server, you may use the connect 
-# and disconnect scripts.
-route = 192.168.1.0/255.255.255.0
-route = 192.168.5.0/255.255.255.0
-.sp
-.in -4
-.fi
-.sp
-.SH "EXIT STATUS"
-One of the following exit values will be returned:
-.TP
-.BR 0 " (EXIT_SUCCESS)"
-Successful program execution.
-.TP
-.BR 1 " (EXIT_FAILURE)"
-The operation failed or the command syntax was not valid.
-.SH COMPATIBILITY
-The server has been tested to be compatible with the openconnect VPN client.
-.SH "AUTHORS"
-Nikos Mavrogiannopoulos
-.SH "COPYRIGHT"
-Copyright (C) 2013 Nikos Mavrogiannopoulos all rights reserved.
-This program is released under the terms of the GNU General Public License, version 2.
-.SH "BUGS"
-Please send bug reports to: openconnect-devel at lists.infradead.org
-.SH "NOTES"
-This manual page was \fIAutoGen\fP-erated from the \fBocserv\fP
-option definitions.
-- 
1.7.10.4