getaddrinfo failed: Servname not supported for ai_socktype

[Matthew Kitchin (public/usenet)]

  On 8/7/2010 2:25 AM, David Woodhouse wrote:
> Yeah, in that case you were definitely connected to the VPN and
> keepalives were working, etc.
>
> It looks like the addresses and routing weren't configured properly.
>
> Precisely what is /etc/openconnect.script and is it executable? On
> CentOS you ought to be able to use --script /etc/vpnc/vpnc-script.
>
Thank you for the quick responses!

/etc/openconnect.script is a straight copy of

http://git.infradead.org/users/dwmw2/vpnc-scripts.git/blob_plain/HEAD:/vpnc-script
I couldn't see anywhere indicating I was supposed to modify it.

It is executable.
[root at VM-MKLinux ~]# ll /etc/openconnect.script
-rwxr-xr-x 1 root root 18337 Aug  6 22:43 /etc/openconnect.script

I did not modify it at all.
I don't have /etc/vpnc/vpnc-script on my machine. I assume that is 
becuase I don't have vpnc installed.
> What is the output if 'ifconfig tun0' and 'route -n' while openconnect
> is running, and what's in /etc/resolv.conf?
[root at VM-MKLinux ~]# ifconfig tun0
tun0      Link encap:UNSPEC  HWaddr 
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
           inet addr:10.70.6.102  P-t-P:10.70.6.102  Mask:255.255.255.255
           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1406  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:500
           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

[root at VM-MKLinux ~]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
10.85.0.10      0.0.0.0         255.255.255.255 UH    0      0        0 tun0
10.85.0.11      0.0.0.0         255.255.255.255 UH    0      0        0 tun0
216.248.9.102   75.151.54.46    255.255.255.255 UGH   0      0        0 eth0
75.151.54.40    0.0.0.0         255.255.255.248 U     0      0        0 eth0
10.70.6.0       0.0.0.0         255.255.255.0   U     0      0        0 tun0
172.27.0.0      0.0.0.0         255.255.0.0     U     0      0        0 tun0
10.85.0.0       0.0.0.0         255.255.0.0     U     0      0        0 tun0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
10.92.0.0       0.0.0.0         255.255.0.0     U     0      0        0 tun0
0.0.0.0         75.151.54.46    0.0.0.0         UG    0      0        0 eth0

[root at VM-MKLinux ~]# cat /etc/resolv.conf
#@VPNC_GENERATED@ -- this file is generated by vpnc
# and will be overwritten by vpnc
# as long as the above mark is intact
search unix
nameserver 10.85.0.10
nameserver 10.85.0.11

I'm guessing all the 0.0.0.0 in the gateways above is an issue.

> Don't send 'webvpn' cookies to the mailing list, btw -- those are *all*
> that's required to allow a client to connect using your authenticated
> session.
>
Sorry about that. I blanked out my username and killed my session before 
I sent that. I assumed the cookie data wouldn't be useful once my 
session was dead. I won't send it again.