Build errors for rpi-0w on linux 5.17.15 and above

[Laurentiu-Cristian Duca]

It worked,
thank you

On 8/23/22, Phil Elwell <phil at raspberrypi.com> wrote:
> Hi Laurentiu-Cristian,
>
> On Tue, 23 Aug 2022 at 15:11, Laurentiu-Cristian Duca
> <laurentiu.duca at gmail.com> wrote:
>>
>> Forgot to note that before trying to build zImage, I launch the make
>> of bcm2835_defconfig.
>>
>> Thanks
>>
>> On 8/23/22, Laurentiu-Cristian Duca <laurentiu.duca at gmail.com> wrote:
>> > Hello,
>> >
>> >   On rpi-0w, when I try to build the linux kernel 5.17.15,
>> > using any of the following toolchains, I get the following error [1].
>> > gcc-arm-10.3-2021.07-x86_64-arm-none-linux-gnueabihf.tar.xz
>> > armv6-eabihf--glibc--bleeding-edge-2021.11-1.tar.bz2
>> >
>> >   Similar errors appear on 5.19.x too.
>> >   Any help would be appreciated.
>> >
>> > Thank you,
>> > Laurentiu-Cristian Duca
>> >
>> > [1]
>> > Linux 5.17.15 build error
>> > make -j5 ARCH=arm
>> > CROSS_COMPILE=/home/laur/lucru/raspberry-pi/rpi-zero-w/gcc-arm-10.3-2021.07-x86_64-arm-none-linux-gnueabihf/bin/arm-none-linux-gnueabihf-
>> > INSTALL_MOD_PATH=/home/laur/lucru/raspberry-pi/rpi-zero-w/rpi-5.17.15-modules
>> > zImage
>> >   SYNC    include/config/auto.conf.cmd
>> >   CC      scripts/mod/empty.o
>> >   CC      scripts/mod/devicetable-offsets.s
>> >   MKELF   scripts/mod/elfconfig.h
>> >   HOSTCC  scripts/mod/modpost.o
>> >   HOSTCC  scripts/mod/file2alias.o
>> >   HOSTCC  scripts/mod/sumversion.o
>> >   HOSTLD  scripts/mod/modpost
>> >   CC      kernel/bounds.s
>> >   CALL    scripts/atomic/check-atomics.sh
>> >   CC      arch/arm/kernel/asm-offsets.s
>> >   CALL    scripts/checksyscalls.sh
>> >   AS      usr/initramfs_data.o
>> >   CC      init/main.o
>> >   CHK     include/generated/compile.h
>> >   CC      arch/arm/vfp/vfpmodule.o
>> >   AR      usr/built-in.a
>> >   CC      arch/arm/mach-bcm/board_bcm2835.o
>> >   CC      init/do_mounts.o
>> >   UPD     include/generated/compile.h
>> >   CC      arch/arm/mach-bcm/bcm2711.o
>> >   CC      kernel/fork.o
>> >   AS      arch/arm/vfp/entry.o
>> >   AS      arch/arm/vfp/vfphw.o
>> >   CC      arch/arm/vfp/vfpsingle.o
>> >   AR      arch/arm/mach-bcm/built-in.a
>> >   CC      kernel/exec_domain.o
>> >   CC      certs/system_keyring.o
>> >   CC      arch/arm/vfp/vfpdouble.o
>> >   CC      init/do_mounts_initrd.o
>> >   HOSTCC  certs/extract-cert
>> >   CC      mm/filemap.o
>> > certs/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file
>> > or directory
>> >    21 | #include <openssl/bio.h>
>> >       |          ^~~~~~~~~~~~~~~
>> > compilation terminated.
>> >
>
> Have you installed the libssl-dev package?
>
> You might find our kernel compilation instructions useful, even if
> they are mainly aimed at building our downstream branches. You will
> find them at:
>
> https://www.raspberrypi.com/documentation/computers/linux_kernel.html#building.
>
> Phil
>