[PATCH v2 1/2] pinctrl: bcm2835: Change init order for gpio hogs

[Florian Fainelli]

On 12/6/21 1:22 AM, Phil Elwell wrote:
> ...and gpio-ranges
> 
> pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
> side is registered first, but this breaks gpio hogs (which are
> configured during gpiochip_add_data). Part of the hog initialisation
> is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
> yet been registered this results in an -EPROBE_DEFER from which it can
> never recover.
> 
> Change the initialisation sequence to register the pinctrl driver
> first.
> 
> This also solves a similar problem with the gpio-ranges property, which
> is required in order for released pins to be returned to inputs.
> 
> Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip")
> Signed-off-by: Phil Elwell <phil at raspberrypi.com>

Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
-- 
Florian