[PATCH] staging: bcm2835-audio: initial staging submission
Michael Zoran
mzoran at crowfest.net
Wed Jan 25 16:39:49 PST 2017
Initial cleanup of bcm2835-audio driver for the
bcm2535(Raspberry PI)
Driver provides HDMI audio through ALSA and is built
on top of the vc04_services driver.
Original version of the driver is available at:
http://www.github.com/raspberry/linux
Driver compiles without any build errors or warnings.
Tested on a RPI 3 running in ARM64 mode with the
vlc player and alsautils.
Signed-off-by: Michael Zoran <mzoran at crowfest.net>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 2 +
drivers/staging/bcm2835-audio/Kconfig | 7 +
drivers/staging/bcm2835-audio/Makefile | 5 +
drivers/staging/bcm2835-audio/bcm2835-ctl.c | 346 ++++++++
drivers/staging/bcm2835-audio/bcm2835-pcm.c | 560 +++++++++++++
drivers/staging/bcm2835-audio/bcm2835-vchiq.c | 903 +++++++++++++++++++++
drivers/staging/bcm2835-audio/bcm2835.c | 519 ++++++++++++
drivers/staging/bcm2835-audio/bcm2835.h | 169 ++++
.../staging/bcm2835-audio/vc_vchi_audioserv_defs.h | 121 +++
10 files changed, 2634 insertions(+)
create mode 100644 drivers/staging/bcm2835-audio/Kconfig
create mode 100644 drivers/staging/bcm2835-audio/Makefile
create mode 100644 drivers/staging/bcm2835-audio/bcm2835-ctl.c
create mode 100644 drivers/staging/bcm2835-audio/bcm2835-pcm.c
create mode 100644 drivers/staging/bcm2835-audio/bcm2835-vchiq.c
create mode 100644 drivers/staging/bcm2835-audio/bcm2835.c
create mode 100644 drivers/staging/bcm2835-audio/bcm2835.h
create mode 100644 drivers/staging/bcm2835-audio/vc_vchi_audioserv_defs.h
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index cd005cd41413..737f9d58afde 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -104,4 +104,6 @@ source "drivers/staging/greybus/Kconfig"
source "drivers/staging/vc04_services/Kconfig"
+source "drivers/staging/bcm2835-audio/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 831e2e891989..93df547dad13 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -41,3 +41,5 @@ obj-$(CONFIG_ISDN_I4L) += i4l/
obj-$(CONFIG_KS7010) += ks7010/
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
+obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/
+
diff --git a/drivers/staging/bcm2835-audio/Kconfig b/drivers/staging/bcm2835-audio/Kconfig
new file mode 100644
index 000000000000..32a2ff9ef9b2
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/Kconfig
@@ -0,0 +1,7 @@
+config SND_BCM2835
+ tristate "BCM2835 ALSA driver"
+ depends on ARCH_BCM2835 && BCM2835_VCHIQ && SND
+ select SND_PCM
+ help
+ Say Y or M if you want to support BCM2835 Alsa pcm card driver
+
diff --git a/drivers/staging/bcm2835-audio/Makefile b/drivers/staging/bcm2835-audio/Makefile
new file mode 100644
index 000000000000..d2719e20d1ab
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o
+snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o
+
+ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
+
diff --git a/drivers/staging/bcm2835-audio/bcm2835-ctl.c b/drivers/staging/bcm2835-audio/bcm2835-ctl.c
new file mode 100644
index 000000000000..164daa4c723c
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/bcm2835-ctl.c
@@ -0,0 +1,346 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/rawmidi.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/asoundef.h>
+
+#include "bcm2835.h"
+
+/* volume maximum and minimum in terms of 0.01dB */
+#define CTRL_VOL_MAX 400
+#define CTRL_VOL_MIN -10239 /* originally -10240 */
+
+static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ audio_info(" ... IN\n");
+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = CTRL_VOL_MIN;
+ uinfo->value.integer.max = CTRL_VOL_MAX; /* 2303 */
+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = AUDIO_DEST_MAX - 1;
+ }
+ audio_info(" ... OUT\n");
+ return 0;
+}
+
+/* toggles mute on or off depending on the value of nmute, and returns
+ * 1 if the mute value was changed, otherwise 0
+ */
+static int toggle_mute(struct bcm2835_chip *chip, int nmute)
+{
+ /* if settings are ok, just return 0 */
+ if (chip->mute == nmute)
+ return 0;
+
+ /* if the sound is muted then we need to unmute */
+ if (chip->mute == CTRL_VOL_MUTE) {
+ chip->volume = chip->old_volume; /* copy the old volume back */
+ audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
+ } else /* otherwise we mute */ {
+ chip->old_volume = chip->volume;
+ chip->volume = 26214; /* set volume to minimum level AKA mute */
+ audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
+ }
+
+ chip->mute = nmute;
+ return 1;
+}
+
+static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
+
+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
+ ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
+ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
+ ucontrol->value.integer.value[0] = chip->mute;
+ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE)
+ ucontrol->value.integer.value[0] = chip->dest;
+
+ mutex_unlock(&chip->audio_mutex);
+ return 0;
+}
+
+static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+ int changed = 0;
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
+ audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int) ucontrol->value.integer.value[0]);
+ if (chip->mute == CTRL_VOL_MUTE) {
+ /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */
+ changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */
+ goto unlock;
+ }
+ if (changed
+ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) {
+
+ chip->volume = alsa2chip(ucontrol->value.integer.value[0]);
+ changed = 1;
+ }
+
+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
+ /* Now implemented */
+ audio_info(" Mute attempted\n");
+ changed = toggle_mute(chip, ucontrol->value.integer.value[0]);
+
+ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
+ if (ucontrol->value.integer.value[0] != chip->dest) {
+ chip->dest = ucontrol->value.integer.value[0];
+ changed = 1;
+ }
+ }
+
+ if (changed) {
+ if (bcm2835_audio_set_ctls(chip))
+ printk(KERN_ERR "Failed to set ALSA controls..\n");
+ }
+
+unlock:
+ mutex_unlock(&chip->audio_mutex);
+ return changed;
+}
+
+static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1);
+
+static struct snd_kcontrol_new snd_bcm2835_ctl[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .private_value = PCM_PLAYBACK_VOLUME,
+ .info = snd_bcm2835_ctl_info,
+ .get = snd_bcm2835_ctl_get,
+ .put = snd_bcm2835_ctl_put,
+ .count = 1,
+ .tlv =
+ {.p = snd_bcm2835_db_scale}
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Switch",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = PCM_PLAYBACK_MUTE,
+ .info = snd_bcm2835_ctl_info,
+ .get = snd_bcm2835_ctl_get,
+ .put = snd_bcm2835_ctl_put,
+ .count = 1,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Route",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = PCM_PLAYBACK_DEVICE,
+ .info = snd_bcm2835_ctl_info,
+ .get = snd_bcm2835_ctl_get,
+ .put = snd_bcm2835_ctl_put,
+ .count = 1,
+ },
+};
+
+static int snd_bcm2835_spdif_default_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int snd_bcm2835_spdif_default_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+ int i;
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ for (i = 0; i < 4; i++)
+ ucontrol->value.iec958.status[i] =
+ (chip->spdif_status >> (i * 8)) && 0xff;
+
+ mutex_unlock(&chip->audio_mutex);
+ return 0;
+}
+
+static int snd_bcm2835_spdif_default_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+ unsigned int val = 0;
+ int i, change;
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ for (i = 0; i < 4; i++)
+ val |= (unsigned int) ucontrol->value.iec958.status[i] << (i * 8);
+
+ change = val != chip->spdif_status;
+ chip->spdif_status = val;
+
+ mutex_unlock(&chip->audio_mutex);
+ return change;
+}
+
+static int snd_bcm2835_spdif_mask_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int snd_bcm2835_spdif_mask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ /* bcm2835 supports only consumer mode and sets all other format flags
+ * automatically. So the only thing left is signalling non-audio
+ * content */
+ ucontrol->value.iec958.status[0] = IEC958_AES0_NONAUDIO;
+ return 0;
+}
+
+static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+ int i;
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ for (i = 0; i < 4; i++)
+ ucontrol->value.iec958.status[i] =
+ (chip->spdif_status >> (i * 8)) & 0xff;
+
+ mutex_unlock(&chip->audio_mutex);
+ return 0;
+}
+
+static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
+ unsigned int val = 0;
+ int i, change;
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ for (i = 0; i < 4; i++)
+ val |= (unsigned int) ucontrol->value.iec958.status[i] << (i * 8);
+ change = val != chip->spdif_status;
+ chip->spdif_status = val;
+
+ mutex_unlock(&chip->audio_mutex);
+ return change;
+}
+
+static struct snd_kcontrol_new snd_bcm2835_spdif[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+ .info = snd_bcm2835_spdif_default_info,
+ .get = snd_bcm2835_spdif_default_get,
+ .put = snd_bcm2835_spdif_default_put
+ },
+ {
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
+ .info = snd_bcm2835_spdif_mask_info,
+ .get = snd_bcm2835_spdif_mask_get,
+ },
+ {
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM),
+ .info = snd_bcm2835_spdif_stream_info,
+ .get = snd_bcm2835_spdif_stream_get,
+ .put = snd_bcm2835_spdif_stream_put,
+ },
+};
+
+int snd_bcm2835_new_ctl(struct bcm2835_chip *chip)
+{
+ int err;
+ unsigned int idx;
+
+ strcpy(chip->card->mixername, "Broadcom Mixer");
+ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) {
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip));
+ if (err < 0)
+ return err;
+ }
+ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) {
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_bcm2835_spdif[idx], chip));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
diff --git a/drivers/staging/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/bcm2835-audio/bcm2835-pcm.c
new file mode 100644
index 000000000000..2c3bf63e3391
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/bcm2835-pcm.c
@@ -0,0 +1,560 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include <sound/asoundef.h>
+
+#include "bcm2835.h"
+
+/* hardware definition */
+static struct snd_pcm_hardware snd_bcm2835_playback_hw = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
+ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 1,
+ .channels_max = 2,
+ .buffer_bytes_max = 128 * 1024,
+ .period_bytes_min = 1 * 1024,
+ .period_bytes_max = 128 * 1024,
+ .periods_min = 1,
+ .periods_max = 128,
+};
+
+static struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .rate_min = 44100,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 128 * 1024,
+ .period_bytes_min = 1 * 1024,
+ .period_bytes_max = 128 * 1024,
+ .periods_min = 1,
+ .periods_max = 128,
+};
+
+static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime)
+{
+ audio_info("Freeing up alsa stream here ..\n");
+ if (runtime->private_data)
+ kfree(runtime->private_data);
+ runtime->private_data = NULL;
+}
+
+static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id)
+{
+ struct bcm2835_alsa_stream *alsa_stream = dev_id;
+ unsigned int consumed = 0;
+ int new_period = 0;
+
+ audio_info(" .. IN\n");
+
+ audio_info("alsa_stream=%p substream=%p\n", alsa_stream,
+ alsa_stream ? alsa_stream->substream : 0);
+
+ if (alsa_stream->open)
+ consumed = bcm2835_audio_retrieve_buffers(alsa_stream);
+
+ /* We get called only if playback was triggered, So, the number of buffers we retrieve in
+ * each iteration are the buffers that have been played out already
+ */
+
+ if (alsa_stream->period_size) {
+ if ((alsa_stream->pos / alsa_stream->period_size) !=
+ ((alsa_stream->pos + consumed) / alsa_stream->period_size))
+ new_period = 1;
+ }
+ audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n",
+ alsa_stream->pos,
+ consumed,
+ alsa_stream->buffer_size,
+ (int) (alsa_stream->period_size * alsa_stream->substream->runtime->periods),
+ frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr),
+ new_period);
+ if (alsa_stream->buffer_size) {
+ alsa_stream->pos += consumed &~(1 << 30);
+ alsa_stream->pos %= alsa_stream->buffer_size;
+ }
+
+ if (alsa_stream->substream) {
+ if (new_period)
+ snd_pcm_period_elapsed(alsa_stream->substream);
+ } else {
+ audio_warning(" unexpected NULL substream\n");
+ }
+ audio_info(" .. OUT\n");
+
+ return IRQ_HANDLED;
+}
+
+/* open callback */
+static int snd_bcm2835_playback_open_generic(
+ struct snd_pcm_substream *substream, int spdif)
+{
+ struct bcm2835_chip *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream;
+ int idx;
+ int err;
+
+ audio_info(" .. IN (%d)\n", substream->number);
+
+ if (mutex_lock_interruptible(&chip->audio_mutex)) {
+ audio_error("Interrupted whilst waiting for lock\n");
+ return -EINTR;
+ }
+ audio_info("Alsa open (%d)\n", substream->number);
+ idx = substream->number;
+
+ if (spdif && chip->opened) {
+ err = -EBUSY;
+ goto out;
+ } else if (!spdif && (chip->opened & (1 << idx))) {
+ err = -EBUSY;
+ goto out;
+ }
+ if (idx > MAX_SUBSTREAMS) {
+ audio_error
+ ("substream(%d) device doesn't exist max(%d) substreams allowed\n",
+ idx, MAX_SUBSTREAMS);
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Check if we are ready */
+ if (!(chip->avail_substreams & (1 << idx))) {
+ /* We are not ready yet */
+ audio_error("substream(%d) device is not ready yet\n", idx);
+ err = -EAGAIN;
+ goto out;
+ }
+
+ alsa_stream = kzalloc(sizeof(*alsa_stream), GFP_KERNEL);
+ if (!alsa_stream) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Initialise alsa_stream */
+ alsa_stream->chip = chip;
+ alsa_stream->substream = substream;
+ alsa_stream->idx = idx;
+
+ sema_init(&alsa_stream->buffers_update_sem, 0);
+ sema_init(&alsa_stream->control_sem, 0);
+ spin_lock_init(&alsa_stream->lock);
+
+ /* Enabled in start trigger, called on each "fifo irq" after that */
+ alsa_stream->enable_fifo_irq = 0;
+ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq;
+
+ err = bcm2835_audio_open(alsa_stream);
+ if (err) {
+ kfree(alsa_stream);
+ goto out;
+ }
+ runtime->private_data = alsa_stream;
+ runtime->private_free = snd_bcm2835_playback_free;
+ if (spdif) {
+ runtime->hw = snd_bcm2835_playback_spdif_hw;
+ } else {
+ /* clear spdif status, as we are not in spdif mode */
+ chip->spdif_status = 0;
+ runtime->hw = snd_bcm2835_playback_hw;
+ }
+ /* minimum 16 bytes alignment (for vchiq bulk transfers) */
+ snd_pcm_hw_constraint_step(runtime,
+ 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+ 16);
+
+ chip->alsa_stream[idx] = alsa_stream;
+
+ chip->opened |= (1 << idx);
+ alsa_stream->open = 1;
+ alsa_stream->draining = 1;
+
+out:
+ mutex_unlock(&chip->audio_mutex);
+
+ audio_info(" .. OUT =%d\n", err);
+
+ return err;
+}
+
+static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream)
+{
+ return snd_bcm2835_playback_open_generic(substream, 0);
+}
+
+static int snd_bcm2835_playback_spdif_open(struct snd_pcm_substream *substream)
+{
+ return snd_bcm2835_playback_open_generic(substream, 1);
+}
+
+/* close callback */
+static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream)
+{
+ /* the hardware-specific codes will be here */
+
+ struct bcm2835_chip *chip;
+ struct snd_pcm_runtime *runtime;
+ struct bcm2835_alsa_stream *alsa_stream;
+
+ audio_info(" .. IN\n");
+
+ chip = snd_pcm_substream_chip(substream);
+ if (mutex_lock_interruptible(&chip->audio_mutex)) {
+ audio_error("Interrupted whilst waiting for lock\n");
+ return -EINTR;
+ }
+ runtime = substream->runtime;
+ alsa_stream = runtime->private_data;
+
+ audio_info("Alsa close\n");
+
+ /*
+ * Call stop if it's still running. This happens when app
+ * is force killed and we don't get a stop trigger.
+ */
+ if (alsa_stream->running) {
+ int err;
+ err = bcm2835_audio_stop(alsa_stream);
+ alsa_stream->running = 0;
+ if (err)
+ audio_error(" Failed to STOP alsa device\n");
+ }
+
+ alsa_stream->period_size = 0;
+ alsa_stream->buffer_size = 0;
+
+ if (alsa_stream->open) {
+ alsa_stream->open = 0;
+ bcm2835_audio_close(alsa_stream);
+ }
+ if (alsa_stream->chip)
+ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL;
+ /*
+ * Do not free up alsa_stream here, it will be freed up by
+ * runtime->private_free callback we registered in *_open above
+ */
+
+ chip->opened &= ~(1 << substream->number);
+
+ mutex_unlock(&chip->audio_mutex);
+ audio_info(" .. OUT\n");
+
+ return 0;
+}
+
+/* hw_params callback */
+static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+ int err;
+
+ audio_info(" .. IN\n");
+
+ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+ if (err < 0) {
+ audio_error
+ (" pcm_lib_malloc failed to allocated pages for buffers\n");
+ return err;
+ }
+
+ alsa_stream->channels = params_channels(params);
+ alsa_stream->params_rate = params_rate(params);
+ alsa_stream->pcm_format_width = snd_pcm_format_width(params_format(params));
+ audio_info(" .. OUT\n");
+
+ return err;
+}
+
+/* hw_free callback */
+static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ audio_info(" .. IN\n");
+ return snd_pcm_lib_free_pages(substream);
+}
+
+/* prepare callback */
+static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct bcm2835_chip *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+ int channels;
+ int err;
+
+ audio_info(" .. IN\n");
+
+ if (mutex_lock_interruptible(&chip->audio_mutex))
+ return -EINTR;
+
+ /* notify the vchiq that it should enter spdif passthrough mode by
+ * setting channels=0 (see
+ * https://github.com/raspberrypi/linux/issues/528) */
+ if (chip->spdif_status & IEC958_AES0_NONAUDIO)
+ channels = 0;
+ else
+ channels = alsa_stream->channels;
+
+ err = bcm2835_audio_set_params(alsa_stream, channels,
+ alsa_stream->params_rate,
+ alsa_stream->pcm_format_width);
+ if (err < 0) {
+ audio_error(" error setting hw params\n");
+ }
+
+ bcm2835_audio_setup(alsa_stream);
+
+ /* in preparation of the stream, set the controls (volume level) of the stream */
+ bcm2835_audio_set_ctls(alsa_stream->chip);
+
+
+ memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect));
+
+ alsa_stream->pcm_indirect.hw_buffer_size =
+ alsa_stream->pcm_indirect.sw_buffer_size =
+ snd_pcm_lib_buffer_bytes(substream);
+
+ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream);
+ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream);
+ alsa_stream->pos = 0;
+
+ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n",
+ alsa_stream->buffer_size, alsa_stream->period_size,
+ alsa_stream->pos, runtime->frame_bits);
+
+ mutex_unlock(&chip->audio_mutex);
+ audio_info(" .. OUT\n");
+ return 0;
+}
+
+static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream,
+ struct snd_pcm_indirect *rec, size_t bytes)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+ void *src = (void *) (substream->runtime->dma_area + rec->sw_data);
+ int err;
+
+ err = bcm2835_audio_write(alsa_stream, bytes, src);
+ if (err)
+ audio_error(" Failed to transfer to alsa device (%d)\n", err);
+
+}
+
+static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+ struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect;
+
+ pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max;
+ snd_pcm_indirect_playback_transfer(substream, pcm_indirect,
+ snd_bcm2835_pcm_transfer);
+ return 0;
+}
+
+/* trigger callback */
+static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+ int err = 0;
+
+ audio_info(" .. IN\n");
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n",
+ alsa_stream->running);
+ if (!alsa_stream->running) {
+ err = bcm2835_audio_start(alsa_stream);
+ if (!err) {
+ alsa_stream->pcm_indirect.hw_io =
+ alsa_stream->pcm_indirect.hw_data =
+ bytes_to_frames(runtime,
+ alsa_stream->pos);
+ substream->ops->ack(substream);
+ alsa_stream->running = 1;
+ alsa_stream->draining = 1;
+ } else {
+ audio_error(" Failed to START alsa device (%d)\n", err);
+ }
+ }
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ audio_debug
+ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n",
+ alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING);
+ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
+ audio_info("DRAINING\n");
+ alsa_stream->draining = 1;
+ } else {
+ audio_info("DROPPING\n");
+ alsa_stream->draining = 0;
+ }
+ if (alsa_stream->running) {
+ err = bcm2835_audio_stop(alsa_stream);
+ if (err != 0)
+ audio_error(" Failed to STOP alsa device (%d)\n", err);
+ alsa_stream->running = 0;
+ }
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ audio_info(" .. OUT\n");
+ return err;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct bcm2835_alsa_stream *alsa_stream = runtime->private_data;
+
+ audio_info(" .. IN\n");
+
+ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0,
+ frames_to_bytes(runtime, runtime->status->hw_ptr),
+ frames_to_bytes(runtime, runtime->control->appl_ptr),
+ alsa_stream->pos);
+
+ audio_info(" .. OUT\n");
+ return snd_pcm_indirect_playback_pointer(substream,
+ &alsa_stream->pcm_indirect,
+ alsa_stream->pos);
+}
+
+static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream,
+ unsigned int cmd, void *arg)
+{
+ int ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream,
+ cmd, arg, arg ? *(unsigned *) arg : 0, ret);
+ return ret;
+}
+
+/* operators */
+static struct snd_pcm_ops snd_bcm2835_playback_ops = {
+ .open = snd_bcm2835_playback_open,
+ .close = snd_bcm2835_playback_close,
+ .ioctl = snd_bcm2835_pcm_lib_ioctl,
+ .hw_params = snd_bcm2835_pcm_hw_params,
+ .hw_free = snd_bcm2835_pcm_hw_free,
+ .prepare = snd_bcm2835_pcm_prepare,
+ .trigger = snd_bcm2835_pcm_trigger,
+ .pointer = snd_bcm2835_pcm_pointer,
+ .ack = snd_bcm2835_pcm_ack,
+};
+
+static struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = {
+ .open = snd_bcm2835_playback_spdif_open,
+ .close = snd_bcm2835_playback_close,
+ .ioctl = snd_bcm2835_pcm_lib_ioctl,
+ .hw_params = snd_bcm2835_pcm_hw_params,
+ .hw_free = snd_bcm2835_pcm_hw_free,
+ .prepare = snd_bcm2835_pcm_prepare,
+ .trigger = snd_bcm2835_pcm_trigger,
+ .pointer = snd_bcm2835_pcm_pointer,
+ .ack = snd_bcm2835_pcm_ack,
+};
+
+/* create a pcm device */
+int snd_bcm2835_new_pcm(struct bcm2835_chip *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ audio_info(" .. IN\n");
+ mutex_init(&chip->audio_mutex);
+ if (mutex_lock_interruptible(&chip->audio_mutex)) {
+ audio_error("Interrupted whilst waiting for lock\n");
+ return -EINTR;
+ }
+ err = snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm);
+ if (err < 0)
+ goto out;
+ pcm->private_data = chip;
+ strcpy(pcm->name, "bcm2835 ALSA");
+ chip->pcm = pcm;
+ chip->dest = AUDIO_DEST_AUTO;
+ chip->volume = alsa2chip(0);
+ chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_bcm2835_playback_ops);
+
+ /* pre-allocation of buffers */
+ /* NOTE: this may fail */
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ snd_bcm2835_playback_hw.buffer_bytes_max,
+ snd_bcm2835_playback_hw.buffer_bytes_max);
+
+
+out:
+ mutex_unlock(&chip->audio_mutex);
+ audio_info(" .. OUT\n");
+
+ return 0;
+}
+
+int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ audio_info(" .. IN\n");
+ if (mutex_lock_interruptible(&chip->audio_mutex)) {
+ audio_error("Interrupted whilst waiting for lock\n");
+ return -EINTR;
+ }
+ err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm);
+ if (err < 0)
+ goto out;
+
+ pcm->private_data = chip;
+ strcpy(pcm->name, "bcm2835 IEC958/HDMI");
+ chip->pcm_spdif = pcm;
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_bcm2835_playback_spdif_ops);
+
+ /* pre-allocation of buffers */
+ /* NOTE: this may fail */
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max);
+out:
+ mutex_unlock(&chip->audio_mutex);
+ audio_info(" .. OUT\n");
+
+ return 0;
+}
diff --git a/drivers/staging/bcm2835-audio/bcm2835-vchiq.c b/drivers/staging/bcm2835-audio/bcm2835-vchiq.c
new file mode 100644
index 000000000000..af70c27004cc
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/bcm2835-vchiq.c
@@ -0,0 +1,903 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/syscalls.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+
+#include "bcm2835.h"
+
+/* ---- Include Files -------------------------------------------------------- */
+
+#include "interface/vchi/vchi.h"
+#include "vc_vchi_audioserv_defs.h"
+
+/* ---- Private Constants and Types ------------------------------------------ */
+
+#define BCM2835_AUDIO_STOP 0
+#define BCM2835_AUDIO_START 1
+#define BCM2835_AUDIO_WRITE 2
+
+/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */
+#ifdef AUDIO_DEBUG_ENABLE
+#define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
+#define LOG_WARN( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
+#define LOG_INFO( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
+#define LOG_DBG( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
+#else
+#define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
+#define LOG_WARN( fmt, arg... )
+#define LOG_INFO( fmt, arg... )
+#define LOG_DBG( fmt, arg... )
+#endif
+
+struct bcm2835_audio_instance {
+ unsigned int num_connections;
+ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS];
+ struct completion msg_avail_comp;
+ struct mutex vchi_mutex;
+ struct bcm2835_alsa_stream *alsa_stream;
+ int result;
+ short peer_version;
+};
+
+bool force_bulk = false;
+
+/* ---- Private Variables ---------------------------------------------------- */
+
+/* ---- Private Function Prototypes ------------------------------------------ */
+
+/* ---- Private Functions ---------------------------------------------------- */
+
+static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream);
+static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream);
+static int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int count, void *src);
+
+
+// Routine to send a message across a service
+
+static ssize_t
+bcm2835_vchi_msg_queue_callback(void *context, void *dest,
+ size_t offset, size_t maxsize)
+{
+ memcpy(dest, context + offset, maxsize);
+ return maxsize;
+}
+
+static int
+bcm2835_vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle,
+ void *data,
+ unsigned int size)
+{
+ return vchi_msg_queue(handle,
+ bcm2835_vchi_msg_queue_callback,
+ data,
+ size);
+}
+
+struct bcm2835_audio_work {
+ struct work_struct my_work;
+ struct bcm2835_alsa_stream *alsa_stream;
+ int cmd;
+ void *src;
+ unsigned int count;
+};
+
+static void my_wq_function(struct work_struct *work)
+{
+ struct bcm2835_audio_work *w =
+ container_of(work, struct bcm2835_audio_work, my_work);
+ int ret = -9;
+ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd);
+ switch (w->cmd) {
+ case BCM2835_AUDIO_START:
+ ret = bcm2835_audio_start_worker(w->alsa_stream);
+ break;
+ case BCM2835_AUDIO_STOP:
+ ret = bcm2835_audio_stop_worker(w->alsa_stream);
+ break;
+ case BCM2835_AUDIO_WRITE:
+ ret = bcm2835_audio_write_worker(w->alsa_stream, w->count,
+ w->src);
+ break;
+ default:
+ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd);
+ break;
+ }
+ kfree((void *) work);
+ LOG_DBG(" .. OUT %d\n", ret);
+}
+
+int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream)
+{
+ int ret = -1;
+ LOG_DBG(" .. IN\n");
+ if (alsa_stream->my_wq) {
+ struct bcm2835_audio_work *work =
+ kmalloc(sizeof(struct bcm2835_audio_work *), GFP_ATOMIC);
+ /*--- Queue some work (item 1) ---*/
+ if (work) {
+ INIT_WORK(&work->my_work, my_wq_function);
+ work->alsa_stream = alsa_stream;
+ work->cmd = BCM2835_AUDIO_START;
+ if (queue_work(alsa_stream->my_wq, &work->my_work))
+ ret = 0;
+ } else
+ LOG_ERR(" .. Error: NULL work kmalloc\n");
+ }
+ LOG_DBG(" .. OUT %d\n", ret);
+ return ret;
+}
+
+int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream)
+{
+ int ret = -1;
+ LOG_DBG(" .. IN\n");
+ if (alsa_stream->my_wq) {
+ struct bcm2835_audio_work *work =
+ kmalloc(sizeof(struct bcm2835_audio_work *), GFP_ATOMIC);
+ /*--- Queue some work (item 1) ---*/
+ if (work) {
+ INIT_WORK(&work->my_work, my_wq_function);
+ work->alsa_stream = alsa_stream;
+ work->cmd = BCM2835_AUDIO_STOP;
+ if (queue_work(alsa_stream->my_wq, &work->my_work))
+ ret = 0;
+ } else
+ LOG_ERR(" .. Error: NULL work kmalloc\n");
+ }
+ LOG_DBG(" .. OUT %d\n", ret);
+ return ret;
+}
+
+int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int count, void *src)
+{
+ int ret = -1;
+ LOG_DBG(" .. IN\n");
+ if (alsa_stream->my_wq) {
+ struct bcm2835_audio_work *work =
+ kmalloc(sizeof(struct bcm2835_audio_work *), GFP_ATOMIC);
+ /*--- Queue some work (item 1) ---*/
+ if (work) {
+ INIT_WORK(&work->my_work, my_wq_function);
+ work->alsa_stream = alsa_stream;
+ work->cmd = BCM2835_AUDIO_WRITE;
+ work->src = src;
+ work->count = count;
+ if (queue_work(alsa_stream->my_wq, &work->my_work))
+ ret = 0;
+ } else
+ LOG_ERR(" .. Error: NULL work kmalloc\n");
+ }
+ LOG_DBG(" .. OUT %d\n", ret);
+ return ret;
+}
+
+void my_workqueue_init(struct bcm2835_alsa_stream *alsa_stream)
+{
+ alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1);
+ return;
+}
+
+void my_workqueue_quit(struct bcm2835_alsa_stream *alsa_stream)
+{
+ if (alsa_stream->my_wq) {
+ flush_workqueue(alsa_stream->my_wq);
+ destroy_workqueue(alsa_stream->my_wq);
+ alsa_stream->my_wq = NULL;
+ }
+ return;
+}
+
+static void audio_vchi_callback(void *param,
+ const VCHI_CALLBACK_REASON_T reason,
+ void *msg_handle)
+{
+ struct bcm2835_audio_instance *instance = param;
+ int status;
+ int msg_len;
+ struct vc_audio_msg m;
+ LOG_DBG(" .. IN instance=%p, handle=%p, alsa=%p, reason=%d, handle=%p\n",
+ instance, instance ? instance->vchi_handle[0] : NULL, instance ? instance->alsa_stream : NULL, reason, msg_handle);
+
+ if (reason != VCHI_CALLBACK_MSG_AVAILABLE) {
+ return;
+ }
+ if (!instance) {
+ LOG_ERR(" .. instance is null\n");
+ BUG();
+ return;
+ }
+ if (!instance->vchi_handle[0]) {
+ LOG_ERR(" .. instance->vchi_handle[0] is null\n");
+ BUG();
+ return;
+ }
+ status = vchi_msg_dequeue(instance->vchi_handle[0],
+ &m, sizeof(m), &msg_len, VCHI_FLAGS_NONE);
+ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) {
+ LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n",
+ instance, m.u.result.success);
+ instance->result = m.u.result.success;
+ complete(&instance->msg_avail_comp);
+ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) {
+ struct bcm2835_alsa_stream *alsa_stream = instance->alsa_stream;
+#if defined(CONFIG_64BIT)
+ irq_handler_t callback =
+ (irq_handler_t) (((unsigned long) m.u.complete.callbackl) |
+ ((unsigned long) m.u.complete.callbackh << 32));
+#else
+ irq_handler_t callback = (irq_handler_t) m.u.complete.callback;
+#endif
+ LOG_DBG(" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n",
+ instance, m.u.complete.count);
+ if (alsa_stream && callback) {
+ atomic_add(m.u.complete.count, &alsa_stream->retrieved);
+ callback(0, alsa_stream);
+ } else {
+ LOG_ERR(" .. unexpected alsa_stream=%p, callback=%p\n",
+ alsa_stream, callback);
+ }
+ } else {
+ LOG_ERR(" .. unexpected m.type=%d\n", m.type);
+ }
+ LOG_DBG(" .. OUT\n");
+}
+
+static struct bcm2835_audio_instance *
+vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance,
+ VCHI_CONNECTION_T **vchi_connections,
+ unsigned int num_connections)
+{
+ unsigned int i;
+ struct bcm2835_audio_instance *instance;
+ int status;
+
+ LOG_DBG("%s: start", __func__);
+
+ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) {
+ LOG_ERR("%s: unsupported number of connections %u (max=%u)\n",
+ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS);
+
+ return NULL;
+ }
+ /* Allocate memory for this instance */
+ instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+ if (!instance)
+ return NULL;
+
+ memset(instance, 0, sizeof(*instance));
+ instance->num_connections = num_connections;
+
+ /* Create a lock for exclusive, serialized VCHI connection access */
+ mutex_init(&instance->vchi_mutex);
+ /* Open the VCHI service connections */
+ for (i = 0; i < num_connections; i++) {
+ SERVICE_CREATION_T params = {
+ VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER),
+ VC_AUDIO_SERVER_NAME, // 4cc service code
+ vchi_connections[i], // passed in fn pointers
+ 0, // rx fifo size (unused)
+ 0, // tx fifo size (unused)
+ audio_vchi_callback, // service callback
+ instance, // service callback parameter
+ 1, //TODO: remove VCOS_FALSE, // unaligned bulk recieves
+ 1, //TODO: remove VCOS_FALSE, // unaligned bulk transmits
+ 0 // want crc check on bulk transfers
+ };
+
+ LOG_DBG("%s: about to open %i\n", __func__, i);
+ status = vchi_service_open(vchi_instance, ¶ms,
+ &instance->vchi_handle[i]);
+ LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status);
+ if (status) {
+ LOG_ERR("%s: failed to open VCHI service connection (status=%d)\n",
+ __func__, status);
+
+ goto err_close_services;
+ }
+ /* Finished with the service for now */
+ vchi_service_release(instance->vchi_handle[i]);
+ }
+
+ LOG_DBG("%s: okay\n", __func__);
+ return instance;
+
+err_close_services:
+ for (i = 0; i < instance->num_connections; i++) {
+ LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]);
+ if (instance->vchi_handle[i])
+ vchi_service_close(instance->vchi_handle[i]);
+ }
+
+ kfree(instance);
+ LOG_ERR("%s: error\n", __func__);
+
+ return NULL;
+}
+
+static int vc_vchi_audio_deinit(struct bcm2835_audio_instance *instance)
+{
+ unsigned int i;
+
+ LOG_DBG(" .. IN\n");
+
+ if (!instance) {
+ LOG_ERR("%s: invalid handle %p\n", __func__, instance);
+
+ return -1;
+ }
+
+ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections);
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+
+ /* Close all VCHI service connections */
+ for (i = 0; i < instance->num_connections; i++) {
+ int status;
+ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]);
+ vchi_service_use(instance->vchi_handle[i]);
+
+ status = vchi_service_close(instance->vchi_handle[i]);
+ if (status) {
+ LOG_DBG("%s: failed to close VCHI service connection (status=%d)\n",
+ __func__, status);
+ }
+ }
+
+ mutex_unlock(&instance->vchi_mutex);
+
+ kfree(instance);
+
+ LOG_DBG(" .. OUT\n");
+
+ return 0;
+}
+
+static int bcm2835_audio_open_connection(struct bcm2835_alsa_stream *alsa_stream)
+{
+ static VCHI_INSTANCE_T vchi_instance;
+ static VCHI_CONNECTION_T *vchi_connection;
+ static int initted;
+ struct bcm2835_audio_instance *instance =
+ (struct bcm2835_audio_instance *)alsa_stream->instance;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ LOG_INFO("%s: start\n", __func__);
+ BUG_ON(instance);
+ if (instance) {
+ LOG_ERR("%s: VCHI instance already open (%p)\n",
+ __func__, instance);
+ instance->alsa_stream = alsa_stream;
+ alsa_stream->instance = instance;
+ ret = 0; // xxx todo -1;
+ goto err_free_mem;
+ }
+
+ /* Initialize and create a VCHI connection */
+ if (!initted) {
+ ret = vchi_initialise(&vchi_instance);
+ if (ret) {
+ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
+ __func__, ret);
+
+ ret = -EIO;
+ goto err_free_mem;
+ }
+ ret = vchi_connect(NULL, 0, vchi_instance);
+ if (ret) {
+ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
+ __func__, ret);
+
+ ret = -EIO;
+ goto err_free_mem;
+ }
+ initted = 1;
+ }
+
+ /* Initialize an instance of the audio service */
+ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1);
+
+ if (!instance) {
+ LOG_ERR("%s: failed to initialize audio service\n", __func__);
+
+ ret = -EPERM;
+ goto err_free_mem;
+ }
+
+ instance->alsa_stream = alsa_stream;
+ alsa_stream->instance = instance;
+
+ LOG_DBG(" success !\n");
+err_free_mem:
+ LOG_DBG(" .. OUT\n");
+
+ return ret;
+}
+
+int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream)
+{
+ struct bcm2835_audio_instance *instance;
+ struct vc_audio_msg m;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ my_workqueue_init(alsa_stream);
+
+ ret = bcm2835_audio_open_connection(alsa_stream);
+ if (ret) {
+ ret = -1;
+ goto exit;
+ }
+ instance = alsa_stream->instance;
+ LOG_DBG(" instance (%p)\n", instance);
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ m.type = VC_AUDIO_MSG_TYPE_OPEN;
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+exit:
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+static int bcm2835_audio_set_ctls_chan(struct bcm2835_alsa_stream *alsa_stream,
+ struct bcm2835_chip *chip)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ LOG_INFO(" Setting ALSA dest(%d), volume(%d)\n",
+ chip->dest, chip->volume);
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ instance->result = -1;
+
+ m.type = VC_AUDIO_MSG_TYPE_CONTROL;
+ m.u.control.dest = chip->dest;
+ m.u.control.volume = chip->volume;
+
+ /* Create the message available completion */
+ init_completion(&instance->msg_avail_comp);
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ /* We are expecting a reply from the videocore */
+ wait_for_completion(&instance->msg_avail_comp);
+
+ if (instance->result) {
+ LOG_ERR("%s: result=%d\n", __func__, instance->result);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+int bcm2835_audio_set_ctls(struct bcm2835_chip *chip)
+{
+ int i;
+ int ret = 0;
+ LOG_DBG(" .. IN\n");
+ LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume);
+
+ /* change ctls for all substreams */
+ for (i = 0; i < MAX_SUBSTREAMS; i++) {
+ if (chip->avail_substreams & (1 << i)) {
+ if (!chip->alsa_stream[i]) {
+ LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams);
+ ret = 0;
+ } else if (bcm2835_audio_set_ctls_chan(chip->alsa_stream[i], chip) != 0) {
+ LOG_ERR("Couldn't set the controls for stream %d\n", i);
+ ret = -1;
+ } else LOG_DBG(" Controls set for stream %d\n", i);
+ }
+ }
+ LOG_DBG(" .. OUT ret=%d\n", ret);
+ return ret;
+}
+
+int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int channels, unsigned int samplerate,
+ unsigned int bps)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ LOG_INFO(" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n",
+ channels, samplerate, bps);
+
+ /* resend ctls - alsa_stream may not have been open when first send */
+ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip);
+ if (ret) {
+ LOG_ERR(" Alsa controls not supported\n");
+ return -EINVAL;
+ }
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n", instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ instance->result = -1;
+
+ m.type = VC_AUDIO_MSG_TYPE_CONFIG;
+ m.u.config.channels = channels;
+ m.u.config.samplerate = samplerate;
+ m.u.config.bps = bps;
+
+ /* Create the message available completion */
+ init_completion(&instance->msg_avail_comp);
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ /* We are expecting a reply from the videocore */
+ wait_for_completion(&instance->msg_avail_comp);
+
+ if (instance->result) {
+ LOG_ERR("%s: result=%d", __func__, instance->result);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream)
+{
+ LOG_DBG(" .. IN\n");
+
+ LOG_DBG(" .. OUT\n");
+
+ return 0;
+}
+
+static int bcm2835_audio_start_worker(struct bcm2835_alsa_stream *alsa_stream)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ m.type = VC_AUDIO_MSG_TYPE_START;
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+static int bcm2835_audio_stop_worker(struct bcm2835_alsa_stream *alsa_stream)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ m.type = VC_AUDIO_MSG_TYPE_STOP;
+ m.u.stop.draining = alsa_stream->draining;
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+ LOG_DBG(" .. IN\n");
+
+ my_workqueue_quit(alsa_stream);
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ m.type = VC_AUDIO_MSG_TYPE_CLOSE;
+
+ /* Create the message available completion */
+ init_completion(&instance->msg_avail_comp);
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+ ret = -1;
+ goto unlock;
+ }
+
+ /* We are expecting a reply from the videocore */
+ wait_for_completion(&instance->msg_avail_comp);
+
+ if (instance->result) {
+ LOG_ERR("%s: failed result (result=%d)\n",
+ __func__, instance->result);
+
+ ret = -1;
+ goto unlock;
+ }
+
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+
+ /* Stop the audio service */
+ if (instance) {
+ vc_vchi_audio_deinit(instance);
+ alsa_stream->instance = NULL;
+ }
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+int bcm2835_audio_write_worker(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int count, void *src)
+{
+ struct vc_audio_msg m;
+ struct bcm2835_audio_instance *instance = alsa_stream->instance;
+ int status;
+ int ret;
+
+ LOG_DBG(" .. IN\n");
+
+ LOG_INFO(" Writing %d bytes from %p\n", count, src);
+
+ if (mutex_lock_interruptible(&instance->vchi_mutex)) {
+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",
+ instance->num_connections);
+ return -EINTR;
+ }
+ vchi_service_use(instance->vchi_handle[0]);
+
+ if (instance->peer_version == 0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0) {
+ LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version);
+ }
+ m.type = VC_AUDIO_MSG_TYPE_WRITE;
+ m.u.write.count = count;
+ // old version uses bulk, new version uses control
+ m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0 : 4000;
+#if defined(CONFIG_64BIT)
+ m.u.write.callbackl = (u32) (((unsigned long) alsa_stream->fifo_irq_handler)&0xFFFFFFFF);
+ m.u.write.callbackh = (u32) ((((unsigned long) alsa_stream->fifo_irq_handler) >> 32)&0xFFFFFFFF);
+#else
+ m.u.write.callback = alsa_stream->fifo_irq_handler;
+ m.u.write.cookie = alsa_stream;
+#endif
+ m.u.write.silence = src == NULL;
+
+ /* Send the message to the videocore */
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ &m, sizeof(m));
+
+ if (status) {
+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+ if (!m.u.write.silence) {
+ if (!m.u.write.max_packet) {
+ /* Send the message to the videocore */
+ status = vchi_bulk_queue_transmit(instance->vchi_handle[0],
+ src, count,
+ 0 *
+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED
+ +
+ 1 *
+ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
+ NULL);
+ } else {
+ while (count > 0) {
+ int bytes = min((int) m.u.write.max_packet, (int) count);
+ status = bcm2835_vchi_msg_queue(instance->vchi_handle[0],
+ src, bytes);
+ src = (char *)src + bytes;
+ count -= bytes;
+ }
+ }
+ if (status) {
+ LOG_ERR("%s: failed on vchi_bulk_queue_transmit (status=%d)\n",
+ __func__, status);
+
+ ret = -1;
+ goto unlock;
+ }
+ }
+ ret = 0;
+
+unlock:
+ vchi_service_release(instance->vchi_handle[0]);
+ mutex_unlock(&instance->vchi_mutex);
+ LOG_DBG(" .. OUT\n");
+ return ret;
+}
+
+/**
+ * Returns all buffers from arm->vc
+ */
+void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream)
+{
+ LOG_DBG(" .. IN\n");
+ LOG_DBG(" .. OUT\n");
+ return;
+}
+
+/**
+ * Forces VC to flush(drop) its filled playback buffers and
+ * return them the us. (VC->ARM)
+ */
+void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream)
+{
+ LOG_DBG(" .. IN\n");
+ LOG_DBG(" .. OUT\n");
+}
+
+unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream)
+{
+ unsigned int count = atomic_read(&alsa_stream->retrieved);
+ atomic_sub(count, &alsa_stream->retrieved);
+ return count;
+}
+
+module_param(force_bulk, bool, 0444);
+MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio");
diff --git a/drivers/staging/bcm2835-audio/bcm2835.c b/drivers/staging/bcm2835-audio/bcm2835.c
new file mode 100644
index 000000000000..9e3b248c7085
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/bcm2835.c
@@ -0,0 +1,519 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#include <linux/platform_device.h>
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "bcm2835.h"
+
+/* module parameters (see "Module Parameters") */
+/* SNDRV_CARDS: maximum number of cards supported by this module */
+static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1};
+static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL};
+static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1};
+
+/* HACKY global pointers needed for successive probes to work : ssp
+ * But compared against the changes we will have to do in VC audio_ipc code
+ * to export 8 audio_ipc devices as a single IPC device and then monitor all
+ * four devices in a thread, this gets things done quickly and should be easier
+ * to debug if we run into issues
+ */
+
+static struct snd_card *g_card = NULL;
+static struct bcm2835_chip *g_chip = NULL;
+
+static int snd_bcm2835_free(struct bcm2835_chip *chip)
+{
+ kfree(chip);
+ return 0;
+}
+
+/* component-destructor
+ * (see "Management of Cards and Components")
+ */
+static int snd_bcm2835_dev_free(struct snd_device *device)
+{
+ return snd_bcm2835_free(device->device_data);
+}
+
+/* chip-specific constructor
+ * (see "Management of Cards and Components")
+ */
+static int snd_bcm2835_create(struct snd_card *card,
+ struct platform_device *pdev,
+ struct bcm2835_chip ** rchip)
+{
+ struct bcm2835_chip *chip;
+ int err;
+ static struct snd_device_ops ops = {
+ .dev_free = snd_bcm2835_dev_free,
+ };
+
+ *rchip = NULL;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+
+ chip->card = card;
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
+ snd_bcm2835_free(chip);
+ return err;
+ }
+
+ *rchip = chip;
+ return 0;
+}
+
+static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm2835_chip *chip;
+ struct snd_card *card;
+ u32 numchans;
+ int err, i;
+
+ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels",
+ &numchans);
+ if (err) {
+ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'");
+ return err;
+ }
+
+ if (numchans == 0 || numchans > MAX_SUBSTREAMS) {
+ numchans = MAX_SUBSTREAMS;
+ dev_warn(dev, "Illegal 'brcm,pwm-channels' value, will use %u\n",
+ numchans);
+ }
+
+ err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card);
+ if (err) {
+ dev_err(dev, "Failed to create soundcard structure\n");
+ return err;
+ }
+
+ snd_card_set_dev(card, dev);
+ strcpy(card->driver, "bcm2835");
+ strcpy(card->shortname, "bcm2835 ALSA");
+ sprintf(card->longname, "%s", card->shortname);
+
+ err = snd_bcm2835_create(card, pdev, &chip);
+ if (err < 0) {
+ dev_err(dev, "Failed to create bcm2835 chip\n");
+ goto err_free;
+ }
+
+ err = snd_bcm2835_new_pcm(chip);
+ if (err < 0) {
+ dev_err(dev, "Failed to create new bcm2835 pcm device\n");
+ goto err_free;
+ }
+
+ err = snd_bcm2835_new_spdif_pcm(chip);
+ if (err < 0) {
+ dev_err(dev, "Failed to create new bcm2835 spdif pcm device\n");
+ goto err_free;
+ }
+
+ err = snd_bcm2835_new_ctl(chip);
+ if (err < 0) {
+ dev_err(dev, "Failed to create new bcm2835 ctl\n");
+ goto err_free;
+ }
+
+ for (i = 0; i < numchans; i++) {
+ chip->avail_substreams |= (1 << i);
+ chip->pdev[i] = pdev;
+ }
+
+ err = snd_card_register(card);
+ if (err) {
+ dev_err(dev, "Failed to register bcm2835 ALSA card \n");
+ goto err_free;
+ }
+
+ g_card = card;
+ g_chip = chip;
+ platform_set_drvdata(pdev, card);
+ audio_info("bcm2835 ALSA card created with %u channels\n", numchans);
+
+ return 0;
+
+err_free:
+ snd_card_free(card);
+
+ return err;
+}
+
+static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
+{
+ static int dev;
+ struct bcm2835_chip *chip;
+ struct snd_card *card;
+ int err;
+
+ if (pdev->dev.of_node)
+ return snd_bcm2835_alsa_probe_dt(pdev);
+
+ if (dev >= MAX_SUBSTREAMS)
+ return -ENODEV;
+
+ if (!enable[dev]) {
+ dev++;
+ return -ENOENT;
+ }
+
+ if (dev > 0)
+ goto add_register_map;
+
+ err = snd_card_new(&pdev->dev, index[dev], id[dev], THIS_MODULE, 0, &g_card);
+ if (err < 0)
+ goto out;
+
+ snd_card_set_dev(g_card, &pdev->dev);
+ strcpy(g_card->driver, "bcm2835");
+ strcpy(g_card->shortname, "bcm2835 ALSA");
+ sprintf(g_card->longname, "%s", g_card->shortname);
+
+ err = snd_bcm2835_create(g_card, pdev, &chip);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Failed to create bcm2835 chip\n");
+ goto out_bcm2835_create;
+ }
+
+ g_chip = chip;
+ err = snd_bcm2835_new_pcm(chip);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n");
+ goto out_bcm2835_new_pcm;
+ }
+
+ err = snd_bcm2835_new_spdif_pcm(chip);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Failed to create new BCM2835 spdif pcm device\n");
+ goto out_bcm2835_new_spdif;
+ }
+
+ err = snd_bcm2835_new_ctl(chip);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n");
+ goto out_bcm2835_new_ctl;
+ }
+
+add_register_map:
+ card = g_card;
+ chip = g_chip;
+
+ BUG_ON(!(card && chip));
+
+ chip->avail_substreams |= (1 << dev);
+ chip->pdev[dev] = pdev;
+
+ if (!dev) {
+ err = snd_card_register(card);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Failed to register bcm2835 ALSA card \n");
+ goto out_card_register;
+ }
+ platform_set_drvdata(pdev, card);
+ audio_info("bcm2835 ALSA card created!\n");
+ } else {
+ audio_info("bcm2835 ALSA chip created!\n");
+ platform_set_drvdata(pdev, (void*)(long)dev);
+ }
+
+ dev++;
+
+ return 0;
+
+out_card_register:
+ out_bcm2835_new_ctl :
+ out_bcm2835_new_spdif :
+ out_bcm2835_new_pcm :
+ out_bcm2835_create :
+ BUG_ON(!g_card);
+ if (snd_card_free(g_card))
+ dev_err(&pdev->dev, "Failed to free Registered alsa card\n");
+ g_card = NULL;
+out:
+ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */
+ dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n");
+ return err;
+}
+
+static int snd_bcm2835_alsa_remove(struct platform_device *pdev)
+{
+ int idx;
+ void *drv_data;
+
+ drv_data = platform_get_drvdata(pdev);
+
+ if (drv_data == (void *) g_card) {
+ /* This is the card device */
+ snd_card_free((struct snd_card *)drv_data);
+ g_card = NULL;
+ g_chip = NULL;
+ } else {
+ idx = (int)(long)drv_data;
+ if (g_card) {
+ BUG_ON(!g_chip);
+ /* We pass chip device numbers in audio ipc devices
+ * other than the one we registered our card with
+ */
+ idx = (int)(long)drv_data;
+ BUG_ON(!idx || idx > MAX_SUBSTREAMS);
+ g_chip->avail_substreams &= ~(1 << idx);
+ /* There should be atleast one substream registered
+ * after we are done here, as it wil be removed when
+ * the *remove* is called for the card device
+ */
+ BUG_ON(!g_chip->avail_substreams);
+ }
+ }
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#endif
+
+static const struct of_device_id snd_bcm2835_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-audio",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table);
+
+static struct platform_driver bcm2835_alsa0_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD0",
+ .owner = THIS_MODULE,
+ .of_match_table = snd_bcm2835_of_match_table,
+ },
+};
+
+static struct platform_driver bcm2835_alsa1_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD1",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa2_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD2",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa3_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD3",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa4_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD4",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa5_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD5",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa6_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD6",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bcm2835_alsa7_driver = {
+ .probe = snd_bcm2835_alsa_probe,
+ .remove = snd_bcm2835_alsa_remove,
+#ifdef CONFIG_PM
+ .suspend = snd_bcm2835_alsa_suspend,
+ .resume = snd_bcm2835_alsa_resume,
+#endif
+ .driver =
+ {
+ .name = "bcm2835_AUD7",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int bcm2835_alsa_device_init(void)
+{
+ int err;
+ err = platform_driver_register(&bcm2835_alsa0_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto out;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa1_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_0;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa2_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_1;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa3_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_2;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa4_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_3;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa5_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_4;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa6_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_5;
+ }
+
+ err = platform_driver_register(&bcm2835_alsa7_driver);
+ if (err) {
+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
+ goto unregister_6;
+ }
+
+ return 0;
+
+unregister_6:
+ platform_driver_unregister(&bcm2835_alsa6_driver);
+unregister_5:
+ platform_driver_unregister(&bcm2835_alsa5_driver);
+unregister_4:
+ platform_driver_unregister(&bcm2835_alsa4_driver);
+unregister_3:
+ platform_driver_unregister(&bcm2835_alsa3_driver);
+unregister_2:
+ platform_driver_unregister(&bcm2835_alsa2_driver);
+unregister_1:
+ platform_driver_unregister(&bcm2835_alsa1_driver);
+unregister_0:
+ platform_driver_unregister(&bcm2835_alsa0_driver);
+out:
+ return err;
+}
+
+static void bcm2835_alsa_device_exit(void)
+{
+ platform_driver_unregister(&bcm2835_alsa0_driver);
+ platform_driver_unregister(&bcm2835_alsa1_driver);
+ platform_driver_unregister(&bcm2835_alsa2_driver);
+ platform_driver_unregister(&bcm2835_alsa3_driver);
+ platform_driver_unregister(&bcm2835_alsa4_driver);
+ platform_driver_unregister(&bcm2835_alsa5_driver);
+ platform_driver_unregister(&bcm2835_alsa6_driver);
+ platform_driver_unregister(&bcm2835_alsa7_driver);
+}
+
+late_initcall(bcm2835_alsa_device_init);
+module_exit(bcm2835_alsa_device_exit);
+
+MODULE_AUTHOR("Dom Cobley");
+MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/bcm2835-audio/bcm2835.h b/drivers/staging/bcm2835-audio/bcm2835.h
new file mode 100644
index 000000000000..d333629e93e5
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/bcm2835.h
@@ -0,0 +1,169 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#ifndef __SOUND_ARM_BCM2835_H
+#define __SOUND_ARM_BCM2835_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/pcm-indirect.h>
+#include <linux/workqueue.h>
+
+/*
+#define AUDIO_DEBUG_ENABLE
+#define AUDIO_VERBOSE_DEBUG_ENABLE
+ */
+
+/* Debug macros */
+
+#ifdef AUDIO_DEBUG_ENABLE
+#ifdef AUDIO_VERBOSE_DEBUG_ENABLE
+
+#define audio_debug(fmt, arg...) \
+ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
+
+#define audio_info(fmt, arg...) \
+ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
+
+#else
+
+#define audio_debug(fmt, arg...)
+
+#define audio_info(fmt, arg...)
+
+#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */
+
+#else
+
+#define audio_debug(fmt, arg...)
+
+#define audio_info(fmt, arg...)
+
+#endif /* AUDIO_DEBUG_ENABLE */
+
+#define audio_error(fmt, arg...) \
+ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg)
+
+#define audio_warning(fmt, arg...) \
+ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg)
+
+#define audio_alert(fmt, arg...) \
+ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg)
+
+#define MAX_SUBSTREAMS (8)
+#define AVAIL_SUBSTREAMS_MASK (0xff)
+
+enum {
+ CTRL_VOL_MUTE,
+ CTRL_VOL_UNMUTE
+};
+
+/* macros for alsa2chip and chip2alsa, instead of functions */
+
+#define alsa2chip(vol) (uint)(-((vol << 8) / 100)) /* convert alsa to chip volume (defined as macro rather than function call) */
+#define chip2alsa(vol) -((vol * 100) >> 8) /* convert chip to alsa volume */
+
+/* Some constants for values .. */
+enum snd_bcm2835_route {
+ AUDIO_DEST_AUTO = 0,
+ AUDIO_DEST_HEADPHONES = 1,
+ AUDIO_DEST_HDMI = 2,
+ AUDIO_DEST_MAX,
+};
+
+enum snd_bcm2835_ctrl {
+ PCM_PLAYBACK_VOLUME,
+ PCM_PLAYBACK_MUTE,
+ PCM_PLAYBACK_DEVICE,
+};
+
+/* definition of the chip-specific record */
+struct bcm2835_chip {
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ struct snd_pcm *pcm_spdif;
+ /* Bitmat for valid reg_base and irq numbers */
+ unsigned int avail_substreams;
+ struct platform_device *pdev[MAX_SUBSTREAMS];
+ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS];
+
+ int volume;
+ int old_volume; /* stores the volume value whist muted */
+ int dest;
+ int mute;
+
+ unsigned int opened;
+ unsigned int spdif_status;
+ struct mutex audio_mutex;
+};
+
+struct bcm2835_alsa_stream {
+ struct bcm2835_chip *chip;
+ struct snd_pcm_substream *substream;
+ struct snd_pcm_indirect pcm_indirect;
+
+ struct semaphore buffers_update_sem;
+ struct semaphore control_sem;
+ spinlock_t lock;
+ volatile unsigned int control;
+ volatile unsigned int status;
+
+ int open;
+ int running;
+ int draining;
+
+ int channels;
+ int params_rate;
+ int pcm_format_width;
+
+ unsigned int pos;
+ unsigned int buffer_size;
+ unsigned int period_size;
+
+ unsigned int enable_fifo_irq;
+ irq_handler_t fifo_irq_handler;
+
+ atomic_t retrieved;
+ struct bcm2835_audio_instance *instance;
+ struct workqueue_struct *my_wq;
+ int idx;
+};
+
+int snd_bcm2835_new_ctl(struct bcm2835_chip *chip);
+int snd_bcm2835_new_pcm(struct bcm2835_chip *chip);
+int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip);
+
+int bcm2835_audio_open(struct bcm2835_alsa_stream *alsa_stream);
+int bcm2835_audio_close(struct bcm2835_alsa_stream *alsa_stream);
+int bcm2835_audio_set_params(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int channels, unsigned int samplerate,
+ unsigned int bps);
+int bcm2835_audio_setup(struct bcm2835_alsa_stream *alsa_stream);
+int bcm2835_audio_start(struct bcm2835_alsa_stream *alsa_stream);
+int bcm2835_audio_stop(struct bcm2835_alsa_stream *alsa_stream);
+int bcm2835_audio_set_ctls(struct bcm2835_chip *chip);
+int bcm2835_audio_write(struct bcm2835_alsa_stream *alsa_stream,
+ unsigned int count,
+ void *src);
+unsigned int bcm2835_audio_retrieve_buffers(struct bcm2835_alsa_stream *alsa_stream);
+void bcm2835_audio_flush_buffers(struct bcm2835_alsa_stream *alsa_stream);
+void bcm2835_audio_flush_playback_buffers(struct bcm2835_alsa_stream *alsa_stream);
+
+#endif /* __SOUND_ARM_BCM2835_H */
diff --git a/drivers/staging/bcm2835-audio/vc_vchi_audioserv_defs.h b/drivers/staging/bcm2835-audio/vc_vchi_audioserv_defs.h
new file mode 100644
index 000000000000..2cc81f062274
--- /dev/null
+++ b/drivers/staging/bcm2835-audio/vc_vchi_audioserv_defs.h
@@ -0,0 +1,121 @@
+/*****************************************************************************
+ * Copyright 2011 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available at
+ * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *****************************************************************************/
+
+#ifndef _VC_AUDIO_DEFS_H_
+#define _VC_AUDIO_DEFS_H_
+
+#define VC_AUDIOSERV_MIN_VER 1
+#define VC_AUDIOSERV_VER 2
+
+/* FourCC code used for VCHI connection */
+#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS")
+
+/* Maximum message length */
+#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T ))
+
+/*
+ * List of screens that are currently supported
+ * All message types supported for HOST->VC direction
+ */
+
+enum vc_audio_msg_type {
+ VC_AUDIO_MSG_TYPE_RESULT, // Generic result
+ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result
+ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio
+ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio
+ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio
+ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio
+ VC_AUDIO_MSG_TYPE_START, // Configure audio
+ VC_AUDIO_MSG_TYPE_STOP, // Configure audio
+ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio
+ VC_AUDIO_MSG_TYPE_MAX
+};
+
+/* configure the audio */
+
+struct vc_audio_config {
+ u32 channels;
+ u32 samplerate;
+ u32 bps;
+};
+
+struct vc_audio_control {
+ u32 volume;
+ u32 dest;
+};
+
+struct vc_audio_open {
+ u32 dummy;
+};
+
+struct vc_audio_close {
+ u32 dummy;
+};
+
+struct vc_audio_start {
+ u32 dummy;
+};
+
+struct vc_audio_stop {
+ u32 draining;
+};
+
+/* configure the write audio samples */
+struct vc_audio_write {
+ u32 count; // in bytes
+#if defined(CONFIG_64BIT)
+ u32 callbackl;
+ u32 callbackh;
+#else
+ void *callback;
+ void *cookie;
+#endif
+ s16 silence;
+ s16 max_packet;
+};
+
+/* Generic result for a request (VC->HOST) */
+struct vc_audio_result {
+ s32 success; // Success value
+};
+
+/* Generic result for a request (VC->HOST) */
+struct vc_audio_complete {
+ s32 count; // Success value
+#if defined(CONFIG_64BIT)
+ u32 callbackl;
+ u32 callbackh;
+#else
+ void *callback;
+ void *cookie;
+#endif
+};
+
+/* Message header for all messages in HOST->VC direction */
+struct vc_audio_msg {
+ s32 type; /* Message type (VC_AUDIO_MSG_TYPE) */
+ union {
+ struct vc_audio_config config;
+ struct vc_audio_control control;
+ struct vc_audio_open open;
+ struct vc_audio_close close;
+ struct vc_audio_start start;
+ struct vc_audio_stop stop;
+ struct vc_audio_write write;
+ struct vc_audio_result result;
+ struct vc_audio_complete complete;
+ } u;
+};
+
+#endif /* _VC_AUDIO_DEFS_H_ */
--
2.11.0
More information about the linux-rpi-kernel
mailing list