[PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability
Matt Flax
flatmax at flatmax.org
Mon Feb 6 15:09:36 PST 2017
This patch adds 8 channel capability by allowing DSP modes. It
also increases the channels_max (in the bcm2835_i2s_dai structure)
to 8.
The driver guards against multitrack mode when the codec isn't
master. The driver guards against multitrack capability when in
I2S mode.
Signed-off-by: Matt Flax <flatmax at flatmax.org>
---
sound/soc/bcm/bcm2835-i2s.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 6ba2049..022ca13 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -276,11 +276,16 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
/* otherwise calculate a fitting block ratio */
bclk_ratio = 2 * data_length;
- /* Clock should only be set up here if CPU is clock master */
+ /* Clock should only be set up here if CPU is clock master.
+ If codec isn't master guard against multichannel mode. */
switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
case SND_SOC_DAIFMT_CBS_CFM:
clk_set_rate(dev->clk, sampling_rate * bclk_ratio);
+ case SND_SOC_DAIFMT_CBM_CFS:
+ /* Codec must be master in multichannel mode */
+ if (params_channels(params) > 2)
+ return -EINVAL;
break;
default:
break;
@@ -294,8 +299,14 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
format |= BCM2835_I2S_CHWID((data_length-8)&0xf);
+ /* Default data delay to 1 bit.
+ In I2S mode, we must have 2 channels */
switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
+ if (params_channels(params) != 2)
+ return -EINVAL;
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
data_delay = 1;
break;
default:
@@ -312,6 +323,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
switch (params_channels(params)) {
case 2:
+ case 8:
format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
format |= BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(ch1pos));
format |= BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(ch2pos));
@@ -577,7 +589,7 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
.probe = bcm2835_i2s_dai_probe,
.playback = {
.channels_min = 2,
- .channels_max = 2,
+ .channels_max = 8,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE
| SNDRV_PCM_FMTBIT_S24_LE
@@ -585,7 +597,7 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
},
.capture = {
.channels_min = 2,
- .channels_max = 2,
+ .channels_max = 8,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE
| SNDRV_PCM_FMTBIT_S24_LE
--
2.7.4
More information about the linux-rpi-kernel
mailing list