[PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example

[Stefan Wahren]

Add a thermal zone in order to make the example complete.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 .../bindings/thermal/brcm,bcm2835-thermal.txt      |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
index 474531d..680aca9 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
@@ -10,6 +10,25 @@ clocks: 	Phandle of the clock used by the thermal sensor.
 
 Example:
 
+thermal-zones {
+	gpu_thermal: gpu-thermal {
+		polling-delay-passive = <0>;
+		polling-delay = <1000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <80000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
 thermal: thermal at 7e212000 {
 	compatible = "brcm,bcm2835-thermal";
 	reg = <0x7e212000 0x8>;
-- 
1.7.9.5