usb: dwc2: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 146s

[Eric Anholt]

Stefan Wahren <stefan.wahren at i2se.com> writes:

> Hi,
>
>> Doug Anderson <dianders at chromium.org> hat am 18. April 2017 um 22:41 geschrieben:
>> 
>> 
>> It's hard to know for sure that all of this time is really in
>> urb_enqueue().  Possible we could have task switched out and been
>> blocked elsewhere.  Using ftrace to get more fine-grained timings
>> would be useful.  ktime_get(), ktime_sub(), and ktime_to_us() are your
>> friends here if you want to use trace_printk.
>
> i'm a newbie to ftrace, so i hope this would be helpful.
>
> # connect PL2303 to the onboard hub
> # echo 0 > options/sleep-time
> # echo 0 > function_profile_enabled
> # echo 1 > function_profile_enabled
> # ./usb_test
> # Waiting for at least 20 seconds and then disconnect PL2303
> # echo 0 > function_profile_enabled
> # cat trace_stat/function0
>
>   Function                               Hit    Time            Avg             s^2
>   --------                               ---    ----            ---             ---
>   bcm2835_handle_irq                  361347    219567633 us     607.636 us      1485199 us  
>   __handle_domain_irq                1082482    212639551 us     196.437 us      3642030 us  
>   generic_handle_irq                 1082482    100592051 us     92.927 us       50511334 us 
>   irq_exit                           1082482    98197771 us     90.715 us       29649040 us 
>   handle_level_irq                   1082482    95812379 us     88.511 us       51910093 us 

If I'm reading this output right, we're spending half of our interrupt
processing time in irq_exit(), so even if dwc2's interrupt was free (the
generic_handle_irq() chain), we'd be eating about half the CPU getting
back out of the interrupt handler, right?

I don't really know anything about DWC2 or USB, but is there any way we
could mitigate the interrupt frequency with this hardware?  If nothing
else, could we loop reading gintsts until it reads back 0?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rpi-kernel/attachments/20170420/bbabadb5/attachment.sig>