RFC: Pin (mis)configuration

[Stefan Wahren]

> Stefan Wahren <stefan.wahren at i2se.com> hat am 25. Februar 2017 um 23:28 geschrieben:
> 
> 
> Hi,
> 
> recently we stumbled about some pins ([1], [2]) on the Raspberry Pi 3 which are controlled by the firmware and shouldn't be changed by Linux. So based on the dt-blob.dts [3] i created a reference table for those affected pins in order to avoid such issues in the future [4].
> 
> It would be nice if someone could review this table.
> 
> After that i suggest the following steps:
> 
> 1. Publish this reference on the firmware wiki at Github

After some revisions on Gist the wiki page is ready [1]

[1] - https://github.com/raspberrypi/firmware/wiki/Pin-usage-reference