[PATCH 5/5] staging: vc04_services: use bcm2835 consequently

[Stefan Wahren]

The naming bcm2708 is used only in the vendor kernel, so better
replace it with bcm2835 which is used in mainline in order
to avoid any confusion.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 drivers/staging/Makefile               |    2 +-
 drivers/staging/vc04_services/Kconfig  |    4 ++--
 drivers/staging/vc04_services/Makefile |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2fa9745..3237532 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_MOST)		+= most/
 obj-$(CONFIG_ISDN_I4L)		+= i4l/
 obj-$(CONFIG_KS7010)		+= ks7010/
 obj-$(CONFIG_GREYBUS)		+= greybus/
-obj-$(CONFIG_BCM2708_VCHIQ)	+= vc04_services/
+obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_services/
diff --git a/drivers/staging/vc04_services/Kconfig b/drivers/staging/vc04_services/Kconfig
index 9676fb2..f839a54 100644
--- a/drivers/staging/vc04_services/Kconfig
+++ b/drivers/staging/vc04_services/Kconfig
@@ -1,9 +1,9 @@
-config BCM2708_VCHIQ
+config BCM2835_VCHIQ
 	tristate "Videocore VCHIQ"
 	depends on RASPBERRYPI_FIRMWARE && BROKEN
 	default y
 	help
 		Kernel to VideoCore communication interface for the
-		BCM2708 family of products.
+		BCM2835 family of products.
 		Defaults to Y when the Broadcom Videocore services
 		are included in the build, N otherwise.
diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
index 90ab478..1a9e742 100644
--- a/drivers/staging/vc04_services/Makefile
+++ b/drivers/staging/vc04_services/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_BCM2708_VCHIQ)	+= vchiq.o
+obj-$(CONFIG_BCM2835_VCHIQ)	+= vchiq.o
 
 vchiq-objs := \
    interface/vchiq_arm/vchiq_core.o  \
-- 
1.7.9.5