[PATCH v3] ARM: bcm2835: Add names for the Raspberry Pi GPIO lines

[Eric Anholt]

Stefan Wahren <stefan.wahren at i2se.com> writes:

>> Eric Anholt <eric at anholt.net> hat am 31. Oktober 2016 um 18:53 geschrieben:
>> 
>> 
>> Stefan Wahren <stefan.wahren at i2se.com> writes:
>> 
>> > Hi Eric,
>> >
>> >> Eric Anholt <eric at anholt.net> hat am 27. Oktober 2016 um 18:52 geschrieben:
>> >> 
>> >> 
>> >> From: Linus Walleij <linus.walleij at linaro.org>
>> >> 
>> >> The idea is to give useful names to GPIO lines that an implementer
>> >> will be using from userspace, e.g. for maker type projects.  These are
>> >> user-visible using tools/gpio/lsgpio.c
>> >
>> > sorry for the late feedback, but did you check your patch against the
>> > Firmware
>> > DTS [1]?
>> >
>> > As an example the GPIO38 is connected and named as USB_LIMIT_1A2 since
>> > Raspberry
>> > Pi 1 B Plus.
>> >
>> > [1] -
>> > https://github.com/raspberrypi/documentation/blob/master/configuration/images/dt-blob.dts
>> 
>> I did use the dt-blob sometimes for cross-checking, but these are
>> written against the schematics, not the dt-blob.  If you've got things
>> you'd like changed, could you send a patch?
>
> A patch against your v3 or my own v4 based on your patch?

A followon patch is great, then the changes are obvious and we can
either squash or commit as appropriate.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 800 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rpi-kernel/attachments/20161101/e9cfffda/attachment.sig>