[PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees

[Olivier Blin]

Lubomir Rintel <lkundrak at v3.sk> writes:

> diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
[...]
> @@ -33,3 +37,17 @@
>  		brcm,function = <BCM2835_FSEL_ALT0>;
>  	};
>  };
> +
> +&usb {
> +	usb1 at 1 {
> +		compatible = "usb0424,9514";
> +		reg = <01>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet: usbether at 1 {
> +			compatible = "usb0424,ec00";
> +			reg = <01>;
> +		};
> +	};
> +};

Hi,

This works for me, after making sure that your u-boot patch gets a
chance to be run (unset usbethaddr from u-boot).

Though, I am not really DT-literate, but shouldn't the ethernet block
use the PID from the ethernet device?
The usbether device is 9514 on RPi2, while ec00 is the hub.

Your patch works, but this works as well after swapping the PIDs.

Thanks

-- 
Olivier Blin - blino