[PATCH V2] clk: bcm2835: mark enabled pll_dividers as critical
kernel at martin.sperl.org
kernel at martin.sperl.org
Tue Apr 26 01:56:29 PDT 2016
From: Martin Sperl <kernel at martin.sperl.org>
The bcm2835 firmware enables several clocks and plls before
booting the linux kernel.
These plls should never get disabled as it may result in a
stopped system clock and more.
So during probing we check if the pll_divider is enabled
and if it is then mark that pll_divider as critical.
As a consequence this will also enable the corresponding parent pll.
Here the list of pll_div that are marked as critical:
[ 2.022437] bcm2835-clk 20101000.cprman: found enabled pll_div plla_core - marking it as critical
[ 2.031640] bcm2835-clk 20101000.cprman: found enabled pll_div pllb_arm - marking it as critical
[ 2.040966] bcm2835-clk 20101000.cprman: found enabled pll_div pllc_core0 - marking it as critical
[ 2.050351] bcm2835-clk 20101000.cprman: found enabled pll_div pllc_per - marking it as critical
[ 2.059427] bcm2835-clk 20101000.cprman: found enabled pll_div plld_core - marking it as critical
[ 2.068590] bcm2835-clk 20101000.cprman: found enabled pll_div plld_per - marking it as critical
[ 2.077724] bcm2835-clk 20101000.cprman: found enabled pll_div pllh_pix - marking it as critical
Changelog:
V1 -> V2: apply to pll_dividers instead of clocks
use CLK_IS_CRITICAL flag instead of prepare/enable manually
Signed-off-by: Martin Sperl <kernel at martin.sperl.org>
---
drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6479283c..7f6838f 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1086,6 +1086,15 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
divider->cprman = cprman;
divider->data = data;
+ /* if the pll-divider is running, then mark is as critical */
+ if ((cprman_read(cprman, data->a2w_reg) &
+ A2W_PLL_CHANNEL_DISABLE) == 0) {
+ dev_info(cprman->dev,
+ "found enabled pll_div %s - marking it as critical\n",
+ data->name);
+ init.flags |= CLK_IS_CRITICAL;
+ }
+
clk = devm_clk_register(cprman->dev, ÷r->div.hw);
if (IS_ERR(clk))
return clk;
--
2.1.4
More information about the linux-rpi-kernel
mailing list