[PATCH v2 3/3] clk: bcm2835: Add PWM clock support

[Remi Pommarel]

Register the pwm clock for bcm2835.

Signed-off-by: Remi Pommarel <repk at triplefau.lt>
---
 drivers/clk/bcm/clk-bcm2835.c       | 14 ++++++++++++++
 include/dt-bindings/clock/bcm2835.h |  3 ++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 2b01a53..db378f3 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -39,6 +39,7 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
+#include <linux/clk.h>
 #include <linux/clk/bcm2835.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -807,6 +808,16 @@ static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
 	.frac_bits = 8,
 };
 
+static const struct bcm2835_clock_data bcm2835_clock_pwm_data = {
+	.name = "pwm",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_PWMCTL,
+	.div_reg = CM_PWMDIV,
+	.int_bits = 12,
+	.frac_bits = 12,
+};
+
 struct bcm2835_pll {
 	struct clk_hw hw;
 	struct bcm2835_cprman *cprman;
@@ -1583,6 +1594,9 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
 				  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
 				  0, &cprman->regs_lock);
 
+	clks[BCM2835_CLOCK_PWM] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_pwm_data);
+
 	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
 				   &cprman->onecell);
 }
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
index d323efa..61f1d20 100644
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -43,5 +43,6 @@
 #define BCM2835_CLOCK_TSENS		27
 #define BCM2835_CLOCK_EMMC		28
 #define BCM2835_CLOCK_PERI_IMAGE	29
+#define BCM2835_CLOCK_PWM		30
 
-#define BCM2835_CLOCK_COUNT		30
+#define BCM2835_CLOCK_COUNT		31
-- 
2.0.1