[RFCv2 2/2] rpi: add support to enable usb power domain
Stefan Wahren
info at lategoodbye.de
Wed Nov 4 23:15:35 PST 2015
Hi Alexander,
i think this subject should better start with "ARM:".
Am 03.11.2015 um 23:45 schrieb Alexander Aring:
> This patch adds support for RPi several Power Domains and enable support
> to enable the USB Power Domain when it's not enabled before.
>
> This patch based on Eric Anholt's patch to support Power Domains. He had
> an issue about -EPROBE_DEFER inside the power domain subsystem, this
> issue was solved by commit <311fa6a> ("PM / Domains: Return -EPROBE_DEFER
> if we fail to init or turn-on domain").
>
>[...]
> diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
> new file mode 100644
> index 0000000..c3abc24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
> @@ -0,0 +1,25 @@
> +Raspberry Pi power domain driver
> +
> +Required properties:
> +
> +- compatible: Should be "raspberrypi,bcm2835-power".
> +- firmware: Reference to the RPi firmware device node.
> +- #power-domain-cells: Should be <1>, we providing multiple power domains.
> +
> +The valid defines for power domain are:
> +
> + RPI_POWER_DOMAIN_USB
> +
> +Example:
> +
> +power: power {
> + compatible = "raspberrypi,bcm2835-power";
> + firmware = <&firmware>;
> + #power-domain-cells = <1>;
> +};
> +
> +Example for using power domain:
> +
> +&usb {
> + power-domains = <&power RPI_POWER_DOMAIN_USB>;
> +};
Refering to Documentation/devicetree/bindings/submitting-patches.txt
binding doc should be a separate patch.
> diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> index ab5474e..d9b16d1 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> @@ -1,3 +1,4 @@
> +#include <dt-bindings/arm/raspberrypi-power.h>
> #include "bcm2835.dtsi"
>
> / {
> @@ -20,6 +21,12 @@
> compatible = "raspberrypi,bcm2835-firmware";
> mboxes = <&mailbox>;
> };
> +
> + power: power {
> + compatible = "raspberrypi,bcm2835-power";
> + firmware = <&firmware>;
> + #power-domain-cells = <1>;
> + };
> };
> };
>
> @@ -56,3 +63,7 @@
> status = "okay";
> bus-width = <4>;
> };
> +
> +&usb {
> + power-domains = <&power RPI_POWER_DOMAIN_USB>;
> +};
> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> index 301c73f..3c899b3 100644
> --- a/arch/arm/boot/dts/bcm2835.dtsi
> +++ b/arch/arm/boot/dts/bcm2835.dtsi
> @@ -149,7 +149,7 @@
> status = "disabled";
> };
>
> - usb at 7e980000 {
> + usb: usb at 7e980000 {
> compatible = "brcm,bcm2835-usb";
> reg = <0x7e980000 0x10000>;
> interrupts = <1 9>;
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 1319c3c..244475e5 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -120,6 +120,16 @@ config ARCH_BCM2835
> This enables support for the Broadcom BCM2835 SoC. This SoC is
> used in the Raspberry Pi and Roku 2 devices.
>
> +config RASPBERRY_POWER
RASPBERRYPI_POWER?
> + bool "Raspberry Pi power domain driver"
> + depends on ARCH_BCM2835
> + depends on RASPBERRYPI_FIRMWARE
> + select PM_GENERIC_DOMAINS if PM
Since PM_GENERIC_DOMAINS_OF depends on PM_GENERIC_DOMAINS this line
should be redundant.
> + select PM_GENERIC_DOMAINS_OF if PM
> + help
> + This enables support for the RPi power domains which can be enabled
> + or disabled via the RPi firmware.
> +
> config ARCH_BCM_63XX
> bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
> depends on MMU
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 1780a3f..283295e 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -33,6 +33,7 @@ endif
>
> # BCM2835
> obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
> +obj-$(CONFIG_RASPBERRY_POWER) += raspberrypi-power.o
>
> # BCM5301X
> obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
> diff --git a/arch/arm/mach-bcm/raspberrypi-power.c b/arch/arm/mach-bcm/raspberrypi-power.c
> new file mode 100644
> index 0000000..531300f
> --- /dev/null
> +++ b/arch/arm/mach-bcm/raspberrypi-power.c
> @@ -0,0 +1,180 @@
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Authors:
> + * (C) 2015 Pengutronix, Alexander Aring <aar at pengutronix.de>
> + * Eric Anholt <eric at anholt.net>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/pm_domain.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
Please sort alphabetical.
> +#include <dt-bindings/arm/raspberrypi-power.h>
> +#include <soc/bcm2835/raspberrypi-firmware.h>
> +
> +#define RPI_POWER_DOMAIN(_domain, _name) \
> + [_domain] = { \
> + .domain = _domain, \
> + .enabled = true, \
> + .base = { \
> + .name = _name, \
> + .power_off = raspberrypi_domain_off, \
> + .power_on = raspberrypi_domain_on, \
> + }, \
> + }
> +
> +struct raspberrypi_power_domain {
> + u32 domain;
> + bool enabled;
> + struct generic_pm_domain base;
> +};
> +
> +struct rpi_power_domain_packet {
> + u32 domain;
> + u32 on;
> +} __packet;
It would be nice to use consequently rpi_ as prefix instead of
raspberrypi_ .
> [...]
> diff --git a/include/dt-bindings/arm/raspberrypi-power.h b/include/dt-bindings/arm/raspberrypi-power.h
> new file mode 100644
> index 0000000..51f0772
> --- /dev/null
> +++ b/include/dt-bindings/arm/raspberrypi-power.h
> @@ -0,0 +1,14 @@
> +/*
> + * Copyright © 2015 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _DT_BINDINGS_ARM_BCM2835_MBOX_POWER_H
> +#define _DT_BINDINGS_ARM_BCM2835_MBOX_POWER_H
This needs renaming.
Thanks
Stefan
> +
> +#define RPI_POWER_DOMAIN_USB 3
> +
> +#endif /* _DT_BINDINGS_ARM_BCM2835_MBOX_POWER_H */
>
More information about the linux-rpi-kernel
mailing list