[PATCH 2/2] clk: bcm2835: Add PWM clock support

[Eric Anholt]

Remi Pommarel <repk at triplefau.lt> writes:

> Register the pwm clock for bcm2835.
> This patch also adds the ability to set a clock default rate.

I don't think we should be setting a default clock rate.  That should be
up to the thing that uses the clock.  If we need a standard rate set on
all Raspberry Pis, other than what is set at boot, then we could put it
in the bcm2835-pwm dt block (I think the "Assigned clock parents and
rates" part of clock-bindings.txt gives a way to do so).

> Signed-off-by: Remi Pommarel <repk at triplefau.lt>
> ---
>  arch/arm/boot/dts/bcm2835.dtsi      |  8 ++++++++
>  drivers/clk/bcm/clk-bcm2835.c       | 28 +++++++++++++++++++++++++++-
>  include/dt-bindings/clock/bcm2835.h |  3 ++-
>  3 files changed, 37 insertions(+), 2 deletions(-)

Submitting DT changes is super awkward.  You'd need to put the bcm2835.h
and driver change in one patch with this subject.  The clk maintainers
would pull that patch.  You'd then have a second patch that covers just
the .dtsi change, which I would pull once I had a stable branch to put
it onto that had the bcm2835.h change.

> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
> index aef64de..0736de3 100644
> --- a/arch/arm/boot/dts/bcm2835.dtsi
> +++ b/arch/arm/boot/dts/bcm2835.dtsi
> @@ -177,6 +177,14 @@
>  			status = "disabled";
>  		};
>  
> +		pwm: pwm at 7e20c000 {
> +			compatible = "brcm,bcm2835-pwm";
> +			reg = <0x7e20c000 0x28>;
> +			clocks = <&clocks BCM2835_CLOCK_PWM>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
>  		usb at 7e980000 {
>  			compatible = "brcm,bcm2835-usb";
>  			reg = <0x7e980000 0x10000>;

> diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
> index 9469729..0647118 100644
> --- a/drivers/clk/bcm/clk-bcm2835.c
> +++ b/drivers/clk/bcm/clk-bcm2835.c
> @@ -39,6 +39,7 @@
>  
>  #include <linux/clk-provider.h>
>  #include <linux/clkdev.h>
> +#include <linux/clk.h>
>  #include <linux/clk/bcm2835.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> @@ -625,6 +626,8 @@ struct bcm2835_clock_data {
>  	const char *const *parents;
>  	int num_mux_parents;
>  
> +	unsigned long dft_rate;
> +
>  	u32 ctl_reg;
>  	u32 div_reg;
>  
> @@ -807,6 +810,17 @@ static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
>  	.frac_bits = 8,
>  };
>  
> +static const struct bcm2835_clock_data bcm2835_clock_pwm_data = {
> +	.name = "pwm",
> +	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
> +	.parents = bcm2835_clock_per_parents,
> +	.dft_rate = 9600000,
> +	.ctl_reg = CM_PWMCTL,
> +	.div_reg = CM_PWMDIV,
> +	.int_bits = 12,
> +	.frac_bits = 12,
> +};
> +
>  struct bcm2835_pll {
>  	struct clk_hw hw;
>  	struct bcm2835_cprman *cprman;
> @@ -1440,6 +1454,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
>  static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
>  					  const struct bcm2835_clock_data *data)
>  {
> +	struct clk *ret;
>  	struct bcm2835_clock *clock;
>  	struct clk_init_data init;
>  	const char *parents[1 << CM_SRC_BITS];
> @@ -1477,7 +1492,15 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
>  	clock->data = data;
>  	clock->hw.init = &init;
>  
> -	return devm_clk_register(cprman->dev, &clock->hw);
> +	ret = devm_clk_register(cprman->dev, &clock->hw);
> +	if (IS_ERR(ret))
> +		goto out;
> +
> +	if (data->dft_rate)
> +		clk_set_rate(ret, data->dft_rate);
> +
> +out:
> +	return ret;
>  }
>  
>  static int bcm2835_clk_probe(struct platform_device *pdev)
> @@ -1576,6 +1599,9 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
>  				  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
>  				  0, &cprman->regs_lock);
>  
> +	clks[BCM2835_CLOCK_PWM] =
> +		bcm2835_register_clock(cprman, &bcm2835_clock_pwm_data);
> +
>  	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
>  				   &cprman->onecell);
>  }
> diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
> index d323efa..61f1d20 100644
> --- a/include/dt-bindings/clock/bcm2835.h
> +++ b/include/dt-bindings/clock/bcm2835.h
> @@ -43,5 +43,6 @@
>  #define BCM2835_CLOCK_TSENS		27
>  #define BCM2835_CLOCK_EMMC		28
>  #define BCM2835_CLOCK_PERI_IMAGE	29
> +#define BCM2835_CLOCK_PWM		30
>  
> -#define BCM2835_CLOCK_COUNT		30
> +#define BCM2835_CLOCK_COUNT		31
> -- 
> 2.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rpi-kernel/attachments/20151104/4960e24f/attachment.sig>