[RFCv2 0/2] rpi: add support for rpi power domain driver

[Alexander Aring]

Hi,

this patch series contains at first a patch for the power domain subsystem
which offers to uninit generic power domains when init was called before.

The RPi Power-Domains need to be enabled/disabled by interacting with the
RPi firmware which can fail. To cleanup the probing we need to undo the
power domains again which was registered before.

- Alex

Alexander Aring (2):
  power: domain: add pm_genpd_uninit
  rpi: add support to enable usb power domain

 .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt |  25 +++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  11 ++
 arch/arm/boot/dts/bcm2835.dtsi                     |   2 +-
 arch/arm/mach-bcm/Kconfig                          |  10 ++
 arch/arm/mach-bcm/Makefile                         |   1 +
 arch/arm/mach-bcm/raspberrypi-power.c              | 180 +++++++++++++++++++++
 drivers/base/power/domain.c                        |  15 ++
 include/dt-bindings/arm/raspberrypi-power.h        |  14 ++
 include/linux/pm_domain.h                          |   4 +
 9 files changed, 261 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
 create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
 create mode 100644 include/dt-bindings/arm/raspberrypi-power.h

-- 
2.6.1