June 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jun 1 01:05:42 PDT 2015
Ending: Tue Jun 30 04:56:41 PDT 2015
Messages: 106

• [PATCH v6 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Eric Anholt
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Eric Anholt
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Eric Anholt
• [PATCH v3 2/7] ARM: bcm2835: Add a Raspberry Pi-specific clock driver.   Eric Anholt
• [PATCH v3 3/7] ARM: bcm2835: Add DT for the firmware clocks driver.   Eric Anholt
• [PATCH v3 4/7] ARM: bcm2835: Drop never-used clock-frequency property of uart0.   Eric Anholt
• [PATCH v3 5/7] ARM: bcm2835: Drop the fixed sys_pclk.   Eric Anholt
• [PATCH v3 6/7] ARM: bcm2835: Use the RPi firmware clocks for uart.   Eric Anholt
• [PATCH v3 7/7] ARM: bcm2835: Tie SPI clock to the core clock rate.   Eric Anholt
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Eric Anholt
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Eric Anholt
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Eric Anholt
• [PATCH] pinctrl: bcm2835: Clear the event latch register when disabling interrupts   Jonathan Bell
• [PATCH v6 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Paul Bolle
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Jassi Brar
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Jassi Brar
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Jassi Brar
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Jassi Brar
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Sören Brinkmann
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Mark Brown
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Mark Brown
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Mark Brown
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Wei Chen
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Patrice Chotard
• [PATCH 1/3] dt-bindings: Add Raspberry Pi compatible string for watchdog   Jeff Epler
• We could not deliver your parcel, #0000669358   FedEx Ground
• [PATCH v2 1/2] mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails.   Ulf Hansson
• [PATCH v2 2/2] mmc: sdhci-bcm2835: Actually enable the clock   Ulf Hansson
• [PATCH v2 2/2] mmc: sdhci-bcm2835: Actually enable the clock   Ulf Hansson
• [PATCH 07/15] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH 11/15] pinctrl: kill off set_irq_flags usage   Rob Herring
• [PATCH 07/15] irqchip: kill off set_irq_flags usage   Rob Herring
• [U-Boot] scripts: RPi 2: only 1 out of 4 CPUs brought up   Jonas Jensen
• [PATCH v6 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Lee Jones
• [PATCH v6 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Lee Jones
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Lee Jones
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Lee Jones
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Lee Jones
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Lee Jones
• [PATCH v3 2/7] ARM: bcm2835: Add a Raspberry Pi-specific clock driver.   Lee Jones
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Lee Jones
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Ray Jui
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Jakub Kiciński
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Jakub Kiciński
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Laurent Pinchart
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Thierry Reding
• [PATCH 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Guenter Roeck
• [PATCH 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Guenter Roeck
• [PATCH v3] watchdog: bcm2835: Fix poweroff behaviour   Guenter Roeck
• [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Wolfram Sang
• [PATCH] i2c: busses: i2c-bcm2835: S-Register clear reserved bits   Wolfram Sang
• [PATCH v5] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Wolfram Sang
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Martin Sperl
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Heiko Stübner
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Antoine Tenart
• [PATCH 1/3] dt-bindings: Add Raspberry Pi compatible string for watchdog   Noralf Trønnes
• [PATCH 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Noralf Trønnes
• [PATCH 3/3] ARM: dts: bcm2835-rpi: Add "brcm, raspberrypi-pm-wdt" to wdt compatible   Noralf Trønnes
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH v2 1/3] dt-bindings: Add Raspberry Pi compatible string for watchdog   Noralf Trønnes
• [PATCH v2 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Noralf Trønnes
• [PATCH v2 3/3] ARM: dts: bcm2835-rpi: Add "brcm, raspberrypi-pm-wdt" to wdt compatible   Noralf Trønnes
• [PATCH v2 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Noralf Trønnes
• [PATCH v2 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Noralf Trønnes
• [PATCH v3] watchdog: bcm2835: Fix poweroff behaviour   Noralf Trønnes
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Noralf Trønnes
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Noralf Trønnes
• [PATCH 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Stefan Wahren
• [PATCH 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   Stefan Wahren
• [PATCH 11/15] pinctrl: kill off set_irq_flags usage   Linus Walleij
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Linus Walleij
• [PATCH 2/7] ARM: bcm2835: Add a Raspberry Pi-specific clock driver.   Stephen Warren
• [PATCH v2 2/2] mmc: sdhci-bcm2835: Actually enable the clock   Stephen Warren
• [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Stephen Warren
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Stephen Warren
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Stephen Warren
• [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Stephen Warren
• [PATCH v3 2/7] ARM: bcm2835: Add a Raspberry Pi-specific clock driver.   Stephen Warren
• [PATCH] mailbox/bcm2835: Fix mailbox full detection.   Stephen Warren
• [PATCH v2 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Stephen Warren
• [PATCH v2 3/3] ARM: dts: bcm2835-rpi: Add "brcm, raspberrypi-pm-wdt" to wdt compatible   Stephen Warren
• [PATCH v2 2/3] watchdog: bcm2835: Add poweroff code for the Raspberry Pi   Stephen Warren
• [PATCH] i2c: busses: i2c-bcm2835: S-Register clear reserved bits   Stephen Warren
• [PATCH v3] watchdog: bcm2835: Fix poweroff behaviour   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH v3] 2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH] i2c: busses: i2c-bcm2835: S-Register clear reserved bits   Silvan Wicki
• [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH v5] i2c: busses: i2c-bcm2835: limits cdiv to allowed values   Silvan Wicki
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Masahiro Yamada
• [PATCH] pinctrl: make pinctrl_register() return proper error code   Hongzhou Yang
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   kernel at martin.sperl.org
• [PATCH 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   kernel at martin.sperl.org
• [PATCH V2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   kernel at martin.sperl.org

Last message date: Tue Jun 30 04:56:41 PDT 2015
Archived on: Tue Jun 30 04:57:06 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...