[PATCH v4 7/8] ARM: bcm2835: Tie SPI clock to the core clock rate.

[Eric Anholt]

We were previously using a fixed clock declared in the 2835 DT, but
it's actually the core clock, and it might not be the same if you had
adjusted it using the firmware's config.txt.

Signed-off-by: Eric Anholt <eric at anholt.net>
Acked-by: Stephen Warren <swarren at wwwdotorg.org>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 9549eb8..0a32123 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -69,3 +69,7 @@
 		 <&firmware_clocks RPI_CLOCK_CORE>;
 	clock-names = "uartclk", "apb_pclk";
 };
+
+&spi {
+	clocks = <&firmware_clocks RPI_CLOCK_CORE>;
+};
-- 
2.1.4