[PATCH 5/9] arm64: dts: rockchip: rk3588s-nanopi: rename sd power pin

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

sdmmc_pwren matches the signal name in the schematics, which simplifies
cross-referencing.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index a99e2e60c5f7..1d37862edb5b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -66,7 +66,7 @@ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
 		enable-active-high;
 		gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sd_s0_pwr>;
+		pinctrl-0 = <&sdmmc_pwren>;
 		regulator-name = "vcc_3v3_sd_s0";
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
@@ -334,7 +334,7 @@ sdmmc_det_pin: sdmmc-det-pin {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		sd_s0_pwr: sd-s0-pwr {
+		sdmmc_pwren: sdmmc-pwren {
 			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};

-- 
2.56.0