[PATCH V9 02/11] dt-bindings: iio: imu: icm42600: Add icm42607 binding

[Chris Morgan]

On Sat, May 30, 2026 at 09:26:31AM +0200, Krzysztof Kozlowski wrote:
> On Fri, May 29, 2026 at 10:17:29PM -0500, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan at hotmail.com>
> > 
> > Add devicetree binding for the Invensense ICM42607 and Invensense
> > ICM42607P inertial measurement unit. This unit is a combined
> > accelerometer, gyroscope, and thermometer available via I2C or SPI.
> 
> Implement feedback from v3. Subject is still incorrect.
> 

I'm sorry, that was dropped due to an oversight. I'll correct it.

> > 
> > This device is functionally very similar to the icm42600 series with a
> > very different register layout, however unlike the icm42600 driver we
> > require a interrupt-names property be present.
> 
> Why do we require it? Who needs it?
> 

The driver this was based off of, the icm42600 driver, has a fallback
to select the 1st available interrupt in the event of the named
interrupt not existing. I was told not to do that here so the named
interrupt is a requirement for the icm42607.

> Best regards,
> Krzysztof
> 

Thank you,
Chris