[PATCH V2 4/6] drm/panel: anbernic-td4310: Add RG Vita Pro panel
Chris Morgan
macromorgan at hotmail.com
Wed May 20 07:29:15 PDT 2026
On Mon, May 18, 2026 at 03:55:08PM +0200, neil.armstrong at linaro.org wrote:
> On 5/16/26 00:19, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan at hotmail.com>
> >
> > The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
> > on the TD4310 controller IC. It measures approximately 5.5 inches
> > diagonally and is 1080x1920 in resolution.
> >
> > Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> > ---
> > drivers/gpu/drm/panel/Kconfig | 10 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > drivers/gpu/drm/panel/panel-anbernic-td4310.c | 291 ++++++++++++++++++
> > 3 files changed, 302 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-anbernic-td4310.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index d592f4f4b939..61dd00297ecc 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -17,6 +17,16 @@ config DRM_PANEL_ABT_Y030XX067A
> > Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
> > and RG-99 handheld gaming consoles.
> > +config DRM_PANEL_ANBERNIC_TD4310
> > + tristate "Anbernic TD4310 LCD panel"
> > + depends on GPIOLIB && OF
> > + depends on DRM_MIPI_DSI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + help
> > + Say Y here to enable support for Anbernic designed panels with the
> > + TD4310 panel controller such as the ones used on the Anbernic RG
> > + Vita Pro.
> > +
> > config DRM_PANEL_ARM_VERSATILE
> > tristate "ARM Versatile panel driver"
> > depends on OF
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index a4291dc3905b..9d8f70c9de3e 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o
> > +obj-$(CONFIG_DRM_PANEL_ANBERNIC_TD4310) += panel-anbernic-td4310.o
> > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> > obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o
> > obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
> > diff --git a/drivers/gpu/drm/panel/panel-anbernic-td4310.c b/drivers/gpu/drm/panel/panel-anbernic-td4310.c
> > new file mode 100644
> > index 000000000000..733c68ff9771
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-anbernic-td4310.c
> > @@ -0,0 +1,291 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for Anbernic panels with TD4310 panel controller.
> > + *
> > + * Copyright (C) 2026 Chris Morgan <macromorgan at hotmail.com>
> > + *
> > + */
> > +
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_modes.h>
> > +#include <drm/drm_panel.h>
> > +
> > +#include <video/mipi_display.h>
> > +
> > +struct anbernic_panel_td4310_info {
> > + const struct drm_display_mode *display_modes;
> > + unsigned int num_modes;
> > + u16 width_mm;
> > + u16 height_mm;
> > + u32 bus_flags;
> > + unsigned long mode_flags;
> > + u32 format;
> > + u32 lanes;
> > + u16 prepare_delay;
> > + u16 reset_delay;
> > + u16 init_delay;
> > + u16 enable_delay;
> > + u16 disable_delay;
> > + u16 unprepare_delay;
> > +};
> > +
> > +struct anbernic_panel_td4310 {
> > + struct device *dev;
> > + struct mipi_dsi_device *dsi;
> > + struct drm_panel panel;
> > + const struct anbernic_panel_td4310_info *panel_info;
> > + struct gpio_desc *reset_gpio;
> > + struct gpio_desc *enable_gpio;
> > + struct regulator *vdd;
> > + enum drm_panel_orientation orientation;
> > +};
> > +
> > +static inline struct anbernic_panel_td4310 *panel_to_anbernic_panel_td4310(struct drm_panel *panel)
> > +{
> > + return container_of(panel, struct anbernic_panel_td4310, panel);
> > +}
> > +
> > +static int panel_anbernic_td4310_prepare(struct drm_panel *panel)
> > +{
> > + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> > + struct mipi_dsi_device *dsi = ctx->dsi;
> > + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> > + int ret;
> > +
> > + ret = regulator_enable(ctx->vdd);
> > + if (ret)
> > + return ret;
> > +
> > + if (ctx->enable_gpio) {
>
> Drop the if, gpiod_set_value_cansleep will check a return if the gpio desc is NULL.
>
> > + ret = gpiod_set_value_cansleep(ctx->enable_gpio, 1);
> > + if (ret)
> > + goto err_enable;
> > + };
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > + mipi_dsi_msleep(&dsi_ctx, 10);
> > +
> > + ret = gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > + if (ret)
> > + goto err_reset;
> > + if (ctx->panel_info->reset_delay)
> > + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->reset_delay);
> > + ret = gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > + if (ret)
> > + goto err_reset;
> > +
> > + if (ctx->panel_info->enable_delay)
> > + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->enable_delay);
> > +
> > + mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> > + mipi_dsi_msleep(&dsi_ctx, 100);
> > + mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> > + mipi_dsi_msleep(&dsi_ctx, 100);
> > +
> > + return dsi_ctx.accum_err;
> > +
> > +err_reset:
>
> And you don't check it here
Should I check the value and print an error if it fails? I had planned
on continuing even after a failure with the shutdown so it could turn
the device off, unless that's incorrect.
>
> > + gpiod_set_value_cansleep(ctx->enable_gpio, 0);
> > +err_enable:
> > + regulator_disable(ctx->vdd);
> > + return ret;
> > +}
> > +
> > +static int panel_anbernic_td4310_unprepare(struct drm_panel *panel)
> > +{
> > + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> > + struct mipi_dsi_device *dsi = ctx->dsi;
> > + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> > +
> > + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> > + mipi_dsi_msleep(&dsi_ctx, 120);
> > + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> > + mipi_dsi_msleep(&dsi_ctx, 120);
> > +
> > + if (ctx->enable_gpio)
>
> Ditto
I'll remove the if, is it okay to not check the return value since I'm
going to continue anyway or should I check and error (and then
continue).
>
> > + gpiod_set_value_cansleep(ctx->enable_gpio, 0);
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > +
> > + regulator_disable(ctx->vdd);
> > +
> > + return 0;
> > +}
> > +
> > +static int panel_anbernic_td4310_get_modes(struct drm_panel *panel,
> > + struct drm_connector *connector)
> > +{
> > + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> > + const struct anbernic_panel_td4310_info *panel_info = ctx->panel_info;
> > + struct drm_display_mode *mode;
> > + unsigned int i;
> > +
> > + for (i = 0; i < panel_info->num_modes; i++) {
> > + mode = drm_mode_duplicate(connector->dev,
> > + &panel_info->display_modes[i]);
> > + if (!mode)
> > + return -ENOMEM;
> > +
> > + drm_mode_set_name(mode);
> > +
> > + mode->type = DRM_MODE_TYPE_DRIVER;
> > + if (panel_info->num_modes == 1)
> > + mode->type |= DRM_MODE_TYPE_PREFERRED;
> > +
> > + drm_mode_probed_add(connector, mode);
> > + }
>
> Can you add support for a sinlge mode right now, call drm_connector_helper_get_modes_fixed()
> and implement support for multiple modes when a panel needs it ?
>
Sounds like a plan, thank you.
> > +
> > + connector->display_info.bpc = 8;
> > + connector->display_info.width_mm = panel_info->width_mm;
> > + connector->display_info.height_mm = panel_info->height_mm;
> > + connector->display_info.bus_flags = panel_info->bus_flags;
> > +
> > + return panel_info->num_modes;
> > +}
> > +
> > +static enum drm_panel_orientation panel_anbernic_td4310_get_orientation(struct drm_panel *panel)
> > +{
> > + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> > +
> > + return ctx->orientation;
> > +}
> > +
> > +static const struct drm_panel_funcs panel_anbernic_td4310_funcs = {
> > + .prepare = panel_anbernic_td4310_prepare,
> > + .unprepare = panel_anbernic_td4310_unprepare,
> > + .get_modes = panel_anbernic_td4310_get_modes,
> > + .get_orientation = panel_anbernic_td4310_get_orientation,
> > +};
> > +
> > +static int panel_anbernic_td4310_probe(struct mipi_dsi_device *dsi)
> > +{
> > + struct device *dev = &dsi->dev;
> > + struct anbernic_panel_td4310 *ctx;
> > + int ret;
> > +
> > + ctx = devm_drm_panel_alloc(dev, struct anbernic_panel_td4310, panel,
> > + &panel_anbernic_td4310_funcs,
> > + DRM_MODE_CONNECTOR_DSI);
> > + if (IS_ERR(ctx))
> > + return PTR_ERR(ctx);
> > +
> > + ctx->dev = dev;
> > +
> > + ctx->panel_info = of_device_get_match_data(dev);
> > + if (!ctx->panel_info)
> > + return -EINVAL;
> > +
> > + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "Failed to get panel orientation\n");
> > +
> > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(ctx->reset_gpio))
> > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> > + "Cannot get reset gpio\n");
> > +
> > + ctx->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
> > + if (IS_ERR(ctx->enable_gpio))
> > + return dev_err_probe(dev, PTR_ERR(ctx->enable_gpio),
> > + "Cannot get enable gpio\n");
> > +
> > + ctx->vdd = devm_regulator_get(dev, "vdd");
> > + if (IS_ERR(ctx->vdd))
> > + return dev_err_probe(dev, PTR_ERR(ctx->vdd),
> > + "Failed to request vdd regulator\n");
> > +
> > + ctx->dsi = dsi;
> > + mipi_dsi_set_drvdata(dsi, ctx);
> > +
> > + dsi->lanes = ctx->panel_info->lanes;
> > + dsi->format = ctx->panel_info->format;
> > + dsi->mode_flags = ctx->panel_info->mode_flags;
> > +
> > + ret = drm_panel_of_backlight(&ctx->panel);
> > + if (ret)
> > + return ret;
> > +
> > + drm_panel_add(&ctx->panel);
>
> devm_drm_panel_add()
>
Will do.
> > +
> > + ret = mipi_dsi_attach(dsi);
>
> devm_mipi_dsi_attach()
>
Will do.
> > + if (ret < 0) {
> > + dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
> > + drm_panel_remove(&ctx->panel);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void panel_anbernic_td4310_remove(struct mipi_dsi_device *dsi)
> > +{
> > + struct anbernic_panel_td4310 *ctx = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + ret = mipi_dsi_detach(dsi);
> > + if (ret < 0)
> > + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> > +
> > + drm_panel_remove(&ctx->panel);
> > +}
>
> And drop remove completely
>
I take it the devm calls above remove the need for a remove callback?
I take it that's new? Thank you.
> > +
> > +static const struct drm_display_mode anbernic_vitapro_modes[] = {
> > + {
> > + .clock = 140020,
> > + .hdisplay = 1080,
> > + .hsync_start = 1080 + 50,
> > + .hsync_end = 1080 + 50 + 4,
> > + .htotal = 1080 + 50 + 4 + 50,
> > + .vdisplay = 1920,
> > + .vsync_start = 1920 + 15,
> > + .vsync_end = 1920 + 15 + 4,
> > + .vtotal = 1920 + 15 + 4 + 32,
> > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > + },
> > +};
> > +
> > +static const struct anbernic_panel_td4310_info anbernic_vitapro_info = {
> > + .display_modes = anbernic_vitapro_modes,
> > + .num_modes = ARRAY_SIZE(anbernic_vitapro_modes),
> > + .width_mm = 69,
> > + .height_mm = 121,
> > + .bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> > + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET |
> > + MIPI_DSI_CLOCK_NON_CONTINUOUS,
> > + .format = MIPI_DSI_FMT_RGB888,
> > + .lanes = 4,
> > + .prepare_delay = 50,
> > + .reset_delay = 220,
> > + .enable_delay = 120,
> > + .disable_delay = 50,
> > + .unprepare_delay = 20,
> > +};
> > +
> > +static const struct of_device_id panel_anbernic_td4310_of_match[] = {
> > + {
> > + .compatible = "anbernic,panel-vita-pro",
> > + .data = &anbernic_vitapro_info,
> > + },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, panel_anbernic_td4310_of_match);
> > +
> > +static struct mipi_dsi_driver anbernic_panel_td4310_driver = {
> > + .driver = {
> > + .name = "panel-anbernic-td4310",
> > + .of_match_table = panel_anbernic_td4310_of_match,
> > + },
> > + .probe = panel_anbernic_td4310_probe,
> > + .remove = panel_anbernic_td4310_remove,
> > +};
> > +module_mipi_dsi_driver(anbernic_panel_td4310_driver);
> > +
> > +MODULE_AUTHOR("Chris Morgan <macromorgan at hotmail.com>");
> > +MODULE_DESCRIPTION("DRM driver for Anbernic TD4310 MIPI DSI panels");
> > +MODULE_LICENSE("GPL");
>
> Thanks,
> Neil
Thank you,
Chris
More information about the Linux-rockchip
mailing list