[PATCH v10 3/4] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro
Dennis Gilmore
dennis at ausil.us
Sun May 10 19:53:49 PDT 2026
The Orange Pi 5 Pro uses the same SoC and base as the Orange Pi 5 and
Orange Pi 5B but has had sound, USB, and leds wired up differently. The
5 and 5B boards use gmac for ethernet where the Pro has a PCIe attached
NIC.
Move the 5/5B-specific bits (analog-sound/es8388, FUSB302 Type-C,
gmac1, pwm-leds, i2s1_8ch routing, USB role-switch plumbing) out of
rk3588s-orangepi-5.dtsi into a new rk3588s-orangepi-5-5b.dtsi that is
included by both 5 and 5B.
The RK806 PLDO1 and PLDO2 outputs are wired differently between the
5/5B and the Pro (PLDO1/PLDO2 are swapped), so label the PMIC node
rk806 in the base dtsi, drop pldo-reg1/pldo-reg2 from it, and define
them via a &rk806 regulators augmentation in rk3588s-orangepi-5-5b.dtsi.
The Pro will supply its own mapping.
Signed-off-by: Dennis Gilmore <dennis at ausil.us>
Reviewed-by: Alexey Charkov <alchark at gmail.com>
---
.../dts/rockchip/rk3588s-orangepi-5-5b.dtsi | 256 ++++++++++++++++++
.../boot/dts/rockchip/rk3588s-orangepi-5.dts | 6 +-
.../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 253 +----------------
.../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 2 +-
4 files changed, 272 insertions(+), 245 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
new file mode 100644
index 000000000000..b42d2f5d9e3e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree definitions shared by the Orange Pi 5 and Orange Pi 5B
+ * but not the Orange Pi 5 Pro.
+ */
+
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+ };
+
+ vbus_typec: regulator-vbus-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ regulator-name = "vbus_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ pinctrl-names = "default";
+ tx_delay = <0x42>;
+ status = "okay";
+};
+
+&i2c6 {
+ es8388: audio-codec at 10 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x10>;
+ clocks = <&cru I2S1_8CH_MCLKOUT>;
+ AVDD-supply = <&vcca_3v3_s0>;
+ DVDD-supply = <&vcca_1v8_s0>;
+ HPVDD-supply = <&vcca_3v3_s0>;
+ PVDD-supply = <&vcca_3v3_s0>;
+ assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+
+ usbc0: usb-typec at 22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&i2s1_8ch {
+ rockchip,i2s-tx-route = <3 2 1 0>;
+ rockchip,i2s-rx-route = <1 3 2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclk
+ &i2s1m0_mclk
+ &i2s1m0_lrck
+ &i2s1m0_sdi1
+ &i2s1m0_sdo3>;
+ status = "okay";
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0m2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rk806 {
+ regulators {
+ vcc_1v8_s0: pldo-reg1 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg2 {
+ regulator-name = "vcca_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+ };
+};
+
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ port {
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
+&usb_host2_xhci {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index 83b9b6645a1e..d76bdf1b5e90 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -2,12 +2,16 @@
/dts-v1/;
-#include "rk3588s-orangepi-5.dtsi"
+#include "rk3588s-orangepi-5-5b.dtsi"
/ {
model = "Xunlong Orange Pi 5";
compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+ aliases {
+ mmc0 = &sdmmc;
+ };
+
vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
compatible = "regulator-fixed";
enable-active-high;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index fd5c6a025cd1..9bdecd5a07e5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -3,19 +3,13 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
-#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
/ {
- aliases {
- ethernet0 = &gmac1;
- mmc0 = &sdmmc;
- };
-
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -34,38 +28,6 @@ button-recovery {
};
};
- analog-sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_detect>;
- simple-audio-card,name = "rockchip,es8388";
- simple-audio-card,bitclock-master = <&masterdai>;
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&masterdai>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,routing =
- "Headphones", "LOUT1",
- "Headphones", "ROUT1",
- "LINPUT1", "Microphone Jack",
- "RINPUT1", "Microphone Jack",
- "LINPUT2", "Onboard Microphone",
- "RINPUT2", "Onboard Microphone";
- simple-audio-card,widgets =
- "Microphone", "Microphone Jack",
- "Microphone", "Onboard Microphone",
- "Headphone", "Headphones";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_8ch>;
- };
-
- masterdai: simple-audio-card,codec {
- sound-dai = <&es8388>;
- system-clock-frequency = <12288000>;
- };
- };
-
hdmi0-con {
compatible = "hdmi-connector";
type = "a";
@@ -77,28 +39,14 @@ hdmi0_con_in: endpoint {
};
};
- pwm-leds {
- compatible = "pwm-leds";
-
- led {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- linux,default-trigger = "heartbeat";
- max-brightness = <255>;
- pwms = <&pwm0 0 25000 0>;
- };
- };
-
- vbus_typec: regulator-vbus-typec {
+ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&typec5v_pwren>;
- regulator-name = "vbus_typec";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+ regulator-name = "vcc_3v3_sd_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
@@ -109,16 +57,6 @@ vcc5v0_sys: regulator-vcc5v0-sys {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
-
- vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
- compatible = "regulator-fixed";
- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
- regulator-name = "vcc_3v3_sd_s0";
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_s3>;
- };
};
&combphy0_ps {
@@ -161,20 +99,6 @@ &cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
-&gmac1 {
- clock_in_out = "output";
- phy-handle = <&rgmii_phy1>;
- phy-mode = "rgmii-rxid";
- pinctrl-0 = <&gmac1_miim
- &gmac1_tx_bus2
- &gmac1_rx_bus2
- &gmac1_rgmii_clk
- &gmac1_rgmii_bus>;
- pinctrl-names = "default";
- tx_delay = <0x42>;
- status = "okay";
-};
-
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
@@ -270,69 +194,6 @@ &i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
- es8388: audio-codec at 10 {
- compatible = "everest,es8388", "everest,es8328";
- reg = <0x10>;
- clocks = <&cru I2S1_8CH_MCLKOUT>;
- AVDD-supply = <&vcca_3v3_s0>;
- DVDD-supply = <&vcca_1v8_s0>;
- HPVDD-supply = <&vcca_3v3_s0>;
- PVDD-supply = <&vcca_3v3_s0>;
- assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
- assigned-clock-rates = <12288000>;
- #sound-dai-cells = <0>;
- };
-
- usbc0: usb-typec at 22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&usbc0_int>;
- vbus-supply = <&vbus_typec>;
- status = "okay";
-
- usb_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- data-role = "dual";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "source";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- usbc0_hs: endpoint {
- remote-endpoint = <&usb_host0_xhci_drd_sw>;
- };
- };
-
- port at 1 {
- reg = <1>;
- usbc0_ss: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_ss>;
- };
- };
-
- port at 2 {
- reg = <2>;
- usbc0_sbu: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_sbu>;
- };
- };
- };
- };
- };
-
hym8563: rtc at 51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -346,32 +207,10 @@ hym8563: rtc at 51 {
};
};
-&i2s1_8ch {
- rockchip,i2s-tx-route = <3 2 1 0>;
- rockchip,i2s-rx-route = <1 3 2 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1m0_sclk
- &i2s1m0_mclk
- &i2s1m0_lrck
- &i2s1m0_sdi1
- &i2s1m0_sdo3>;
- status = "okay";
-};
-
&i2s5_8ch {
status = "okay";
};
-&mdio1 {
- rgmii_phy1: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x1>;
- reset-assert-us = <20000>;
- reset-deassert-us = <100000>;
- reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-};
-
&pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
@@ -392,22 +231,6 @@ hp_detect: hp-detect {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- usb-typec {
- usbc0_int: usbc0-int {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- typec5v_pwren: typec5v-pwren {
- rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- pinctrl-0 = <&pwm0m2_pins>;
- pinctrl-names = "default";
- status = "okay";
};
&rknn_core_0 {
@@ -491,7 +314,7 @@ &spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- pmic at 0 {
+ rk806: pmic at 0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
@@ -666,31 +489,6 @@ regulator-state-mem {
};
};
- vcc_1v8_s0: pldo-reg1 {
- regulator-name = "vcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8_s0: pldo-reg2 {
- regulator-name = "vcca_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
vdda_1v2_s0: pldo-reg3 {
regulator-name = "vdda_1v2_s0";
regulator-always-on;
@@ -841,26 +639,7 @@ &uart2 {
};
&usbdp_phy0 {
- mode-switch;
- orientation-switch;
- sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbdp_phy0_typec_ss: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&usbc0_ss>;
- };
-
- usbdp_phy0_typec_sbu: endpoint at 1 {
- reg = <1>;
- remote-endpoint = <&usbc0_sbu>;
- };
- };
};
&usb_host0_ehci {
@@ -872,15 +651,7 @@ &usb_host0_ohci {
};
&usb_host0_xhci {
- dr_mode = "otg";
- usb-role-switch;
status = "okay";
-
- port {
- usb_host0_xhci_drd_sw: endpoint {
- remote-endpoint = <&usbc0_hs>;
- };
- };
};
&usb_host1_ehci {
@@ -891,7 +662,7 @@ &usb_host1_ohci {
status = "okay";
};
-&usb_host2_xhci {
+&vop {
status = "okay";
};
@@ -899,10 +670,6 @@ &vop_mmu {
status = "okay";
};
-&vop {
- status = "okay";
-};
-
&vp0 {
vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
index d21ec320d295..8af174777809 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
@@ -2,7 +2,7 @@
/dts-v1/;
-#include "rk3588s-orangepi-5.dtsi"
+#include "rk3588s-orangepi-5-5b.dtsi"
/ {
model = "Xunlong Orange Pi 5B";
--
2.54.0
More information about the Linux-rockchip
mailing list