[PATCH v2 5/5] phy: rockchip: inno-usb2: Add support for RK3528

[neil.armstrong at linaro.org]

On 5/5/26 19:04, Heiko Stuebner wrote:
> From: Jianwei Zheng <jianwei.zheng at rock-chips.com>
> 
> The RK3528 has a single USB2PHY with a otg and host port.
> 
> Add support for the RK3528 variant of USB2PHY.
> 
> PHY tuning for RK3528:
> 
> - Turn off differential receiver in suspend mode to save power
>    consumption.
> 
> - Set HS eye-height to 400mV instead of default 450mV.
> 
> - Choose the Tx fs/ls data as linestate from TX driver for otg port
>    which uses dwc3 controller to improve fs/ls devices compatibility with
>    long cables.
> 
> Undocumented magic-values are based on the linux-stan-6.1-rkr5 tag of
> the vendor-kernel.
> 
> Signed-off-by: Jianwei Zheng <jianwei.zheng at rock-chips.com>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>   drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 84 +++++++++++++++++++
>   1 file changed, 84 insertions(+)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index d8879fcd4291..133cfd6624e8 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1511,6 +1511,38 @@ static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
>   				BIT(2) << BIT_WRITEABLE_SHIFT | 0);
>   }
>   
> +static int rk3528_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> +{
> +	int ret;
> +
> +	/* Turn off otg port differential receiver in suspend mode */
> +	ret = regmap_write(rphy->phy_base, 0x30, BIT(18) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Turn off host port differential receiver in suspend mode */
> +	ret = regmap_write(rphy->phy_base, 0x430, BIT(18) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Set otg port HS eye height to 400mv (default is 450mv) */
> +	ret = regmap_write(rphy->phy_base, 0x30, GENMASK(22, 20) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Set host port HS eye height to 400mv (default is 450mv) */
> +	ret = regmap_write(rphy->phy_base, 0x430, GENMASK(22, 20) | 0x0000);
> +	if (ret)
> +		return ret;
> +
> +	/* Choose the Tx fs/ls data as linestate from TX driver for otg port */
> +	ret = regmap_write(rphy->phy_base, 0x94, GENMASK(22, 19) | 0x0018);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
>   static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
>   {
>   	int ret;
> @@ -1924,6 +1956,57 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
>   	{ /* sentinel */ }
>   };
>   
> +static const struct rockchip_usb2phy_cfg rk3528_phy_cfgs[] = {
> +	{
> +		.reg = 0xffdf0000,
> +		.num_ports	= 2,
> +		.phy_tuning	= rk3528_usb2phy_tuning,
> +		.clkout_ctl_phy	= { 0x041c, 7, 2, 0, 0x27 },
> +		.port_cfgs	= {
> +			[USB2PHY_PORT_OTG] = {
> +				.phy_sus	= { 0x004c, 8, 0, 0, 0x1d1 },
> +				.bvalid_det_en	= { 0x0074, 3, 2, 0, 3 },
> +				.bvalid_det_st	= { 0x0078, 3, 2, 0, 3 },
> +				.bvalid_det_clr	= { 0x007c, 3, 2, 0, 3 },
> +				.idfall_det_en	= { 0x0074, 5, 5, 0, 1 },
> +				.idfall_det_st	= { 0x0078, 5, 5, 0, 1 },
> +				.idfall_det_clr	= { 0x007c, 5, 5, 0, 1 },
> +				.idrise_det_en	= { 0x0074, 4, 4, 0, 1 },
> +				.idrise_det_st	= { 0x0078, 4, 4, 0, 1 },
> +				.idrise_det_clr	= { 0x007c, 4, 4, 0, 1 },
> +				.ls_det_en	= { 0x0074, 0, 0, 0, 1 },
> +				.ls_det_st	= { 0x0078, 0, 0, 0, 1 },
> +				.ls_det_clr	= { 0x007c, 0, 0, 0, 1 },
> +				.utmi_avalid	= { 0x006c, 1, 1, 0, 1 },
> +				.utmi_bvalid	= { 0x006c, 0, 0, 0, 1 },
> +				.utmi_id	= { 0x006c, 6, 6, 0, 1 },
> +				.utmi_ls	= { 0x006c, 5, 4, 0, 1 },
> +			},
> +			[USB2PHY_PORT_HOST] = {
> +				.phy_sus	= { 0x005c, 8, 0, 0x1d2, 0x1d1 },
> +				.ls_det_en	= { 0x0090, 0, 0, 0, 1 },
> +				.ls_det_st	= { 0x0094, 0, 0, 0, 1 },
> +				.ls_det_clr	= { 0x0098, 0, 0, 0, 1 },
> +				.utmi_ls	= { 0x006c, 13, 12, 0, 1 },
> +				.utmi_hstdet	= { 0x006c, 15, 15, 0, 1 },
> +			}
> +		},
> +		.chg_det = {
> +			.opmode		= { 0x004c, 3, 0, 5, 1 },
> +			.cp_det		= { 0x006c, 19, 19, 0, 1 },
> +			.dcp_det	= { 0x006c, 18, 18, 0, 1 },
> +			.dp_det		= { 0x006c, 20, 20, 0, 1 },
> +			.idm_sink_en	= { 0x0058, 1, 1, 0, 1 },
> +			.idp_sink_en	= { 0x0058, 0, 0, 0, 1 },
> +			.idp_src_en	= { 0x0058, 2, 2, 0, 1 },
> +			.rdm_pdwn_en	= { 0x0058, 3, 3, 0, 1 },
> +			.vdm_src_en	= { 0x0058, 5, 5, 0, 1 },
> +			.vdp_src_en	= { 0x0058, 4, 4, 0, 1 },
> +		},
> +	},
> +	{ /* sentinel */ }
> +};
> +
>   static const struct rockchip_usb2phy_cfg rk3562_phy_cfgs[] = {
>   	{
>   		.reg = 0xff740000,
> @@ -2291,6 +2374,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
>   	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
>   	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
>   	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
> +	{ .compatible = "rockchip,rk3528-usb2phy", .data = &rk3528_phy_cfgs },
>   	{ .compatible = "rockchip,rk3562-usb2phy", .data = &rk3562_phy_cfgs },
>   	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
>   	{ .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs },

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil