[PATCH 1/2] pmdomain/rockchip: skip QoS operations for idle-only domains

[Shawn Lin]

Hi Daniel,

在 2026/04/01 星期三 2:02, Daniel Bozeman 写道:
> Idle-only power domains (pwr_mask == 0) cannot actually be powered
> on or off. rockchip_do_pmu_set_power_domain() already returns early
> for these domains, but rockchip_pd_power() still attempts QoS save
> and idle requests before reaching that check.
> 
> On RK3528, the idle-only domains (PD_RKVENC, PD_VO, PD_VPU) have
> QoS registers that may be inaccessible when the generic power domain
> framework attempts to power them off, leading to synchronous external
> aborts.
> 

Is it the real abort happened on your RK3528 board? I am trying to
understand the problem first. Even with idle-only powerdomain, the code
also save the QoS registers before set idle to the powerdomain, so
how the QoS registers become inaccessible?

> Return early from rockchip_pd_power() when pwr_mask is zero, matching
> the existing guard in rockchip_do_pmu_set_power_domain().
> 
> Fixes: 1fe767a56c32 ("soc: rockchip: power-domain: allow domains only handling idle requests")
> Signed-off-by: Daniel Bozeman <daniel at orb.net>
> ---
>   drivers/pmdomain/rockchip/pm-domains.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/pmdomain/rockchip/pm-domains.c b/drivers/pmdomain/rockchip/pm-domains.c
> index 490bbb1d1d..2eecae092a 100644
> --- a/drivers/pmdomain/rockchip/pm-domains.c
> +++ b/drivers/pmdomain/rockchip/pm-domains.c
> @@ -640,6 +640,9 @@ static int rockchip_pd_power(struct rockchip_pm_domain *pd, bool power_on)
>   	if (rockchip_pmu_domain_is_on(pd) == power_on)
>   		return 0;
>   
> +	if (pd->info->pwr_mask == 0)
> +		return 0;
> +
>   	ret = clk_bulk_enable(pd->num_clks, pd->clks);
>   	if (ret < 0) {
>   		dev_err(pmu->dev, "failed to enable clocks\n");
> 
> base-commit: bc330699801d3b4f99110365512caed5adcfaca3