[PATCH v4 27/27] arm64: dts: rockchip: add rga3 dt nodes

[Sven Püschel]

Add devicetree nodes for the RGA3 (Raster Graphics Acceleration 3)
peripheral in the RK3588.

The existing rga node refers to the RGA2-Enhanced peripheral. The RK3588
contains one RGA2-Enhanced core and two RGA3 cores. Both feature a similar
functionality of scaling, cropping and rotating of up to two input
images into one output image. Key differences of the RGA3 are:

- supports 10bit YUV output formats
- supports 8x8 tiles and FBCD as inputs and outputs
- supports BT2020 color space conversion
- max output resolution of (8192-64)x(8192-64)
- MMU can map up to 32G DDR RAM
- fully planar formats (3 planes) are not supported
- max scale up/down factor of 8 (RGA2 allows up to 16)

Signed-off-by: Sven Püschel <s.pueschel at pengutronix.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 44 +++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 7fe9593d8c198..87334636544f8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -1273,6 +1273,50 @@ rga: rga at fdb80000 {
 		power-domains = <&power RK3588_PD_VDPU>;
 	};
 
+	rga3_core0: rga at fdb60000 {
+		compatible = "rockchip,rk3588-rga3";
+		reg = <0x0 0xfdb60000 0x0 0x200>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA3_0>, <&cru HCLK_RGA3_0>, <&cru CLK_RGA3_0_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA3_0_CORE>, <&cru SRST_A_RGA3_0>, <&cru SRST_H_RGA3_0>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3588_PD_RGA30>;
+		iommus = <&rga3_0_mmu>;
+	};
+
+	rga3_0_mmu: iommu at fdb60f00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdb60f00 0x0 0x100>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA3_0>, <&cru HCLK_RGA3_0>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_RGA30>;
+	};
+
+	rga3_core1: rga at fdb70000 {
+		compatible = "rockchip,rk3588-rga3";
+		reg = <0x0 0xfdb70000 0x0 0x200>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA3_1>, <&cru HCLK_RGA3_1>, <&cru CLK_RGA3_1_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA3_1_CORE>, <&cru SRST_A_RGA3_1>, <&cru SRST_H_RGA3_1>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3588_PD_RGA31>;
+		iommus = <&rga3_1_mmu>;
+	};
+
+	rga3_1_mmu: iommu at fdb70f00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdb70f00 0x0 0x100>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA3_1>, <&cru HCLK_RGA3_1>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_RGA31>;
+	};
+
 	vepu121_0: video-codec at fdba0000 {
 		compatible = "rockchip,rk3588-vepu121";
 		reg = <0x0 0xfdba0000 0x0 0x800>;

-- 
2.53.0