[PATCH v11 03/22] drm: Add new general DRM property "color format"

Ville Syrjälä ville.syrjala at linux.intel.com
Tue Mar 24 10:00:45 PDT 2026


On Tue, Mar 24, 2026 at 05:01:07PM +0100, Nicolas Frattaroli wrote:
> +enum drm_connector_color_format {
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_AUTO: The driver or display protocol
> +	 * helpers should pick a suitable color format. All implementations of a
> +	 * specific display protocol must behave the same way with "AUTO", but
> +	 * different display protocols do not necessarily have the same "AUTO"
> +	 * semantics.
> +	 *
> +	 * For HDMI, "AUTO" picks RGB, but falls back to YCbCr 4:2:0 if the
> +	 * bandwidth required for full-scale RGB is not available, or the mode
> +	 * is YCbCr 4:2:0-only, as long as the mode and output both support
> +	 * YCbCr 4:2:0.
> +	 *
> +	 * For display protocols other than HDMI, the recursive bridge chain
> +	 * format selection picks the first chain of bridge formats that works,
> +	 * as has already been the case before the introduction of the "color
> +	 * format" property. Non-HDMI bridges should therefore either sort their
> +	 * bus output formats by preference, or agree on a unified auto format
> +	 * selection logic that's implemented in a common state helper (like
> +	 * how HDMI does it).
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_AUTO = 0,
> +
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_RGB444: RGB output format
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_RGB444,
> +
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_YCBCR444: YCbCr 4:4:4 output format (ie.
> +	 * not subsampled)
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_YCBCR444,
> +
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_YCBCR422: YCbCr 4:2:2 output format (ie.
> +	 * with horizontal subsampling)
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_YCBCR422,
> +
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_YCBCR420: YCbCr 4:2:0 output format (ie.
> +	 * with horizontal and vertical subsampling)
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_YCBCR420,

Seems like this should document what the quantization range
should be for each format.

> +
> +	/**
> +	 * @DRM_CONNECTOR_COLOR_FORMAT_COUNT: Number of valid connector color
> +	 * format values in this enum
> +	 */
> +	DRM_CONNECTOR_COLOR_FORMAT_COUNT,
> +};
> +
> +/**
> + * drm_connector_color_format_valid - Validate drm_connector_color_format value
> + * @fmt: value to check against all values of &enum drm_connector_color_format
> + *
> + * Checks whether the passed in value of @fmt is one of the allowable values in
> + * &enum drm_connector_color_format.
> + *
> + * Returns: %true if it's a valid value for the enum, %false otherwise.
> + */
> +static inline bool __pure
> +drm_connector_color_format_valid(enum drm_connector_color_format fmt)
> +{
> +	switch (fmt) {
> +	case DRM_CONNECTOR_COLOR_FORMAT_AUTO:
> +	case DRM_CONNECTOR_COLOR_FORMAT_RGB444:
> +	case DRM_CONNECTOR_COLOR_FORMAT_YCBCR444:
> +	case DRM_CONNECTOR_COLOR_FORMAT_YCBCR422:
> +	case DRM_CONNECTOR_COLOR_FORMAT_YCBCR420:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
>  const char *
>  drm_hdmi_connector_get_output_format_name(enum drm_output_color_format fmt);
>  
> @@ -1129,6 +1217,13 @@ struct drm_connector_state {
>  	 */
>  	enum drm_colorspace colorspace;
>  
> +	/**
> +	 * @color_format: State variable for Connector property to request
> +	 * color format change on Sink. This is most commonly used to switch
> +	 * between RGB to YUV and vice-versa.
> +	 */
> +	enum drm_connector_color_format color_format;
> +
>  	/**
>  	 * @writeback_job: Writeback job for writeback connectors
>  	 *
> @@ -2127,6 +2222,12 @@ struct drm_connector {
>  	 */
>  	struct drm_property *colorspace_property;
>  
> +	/**
> +	 * @color_format_property: Connector property to set the suitable
> +	 * color format supported by the sink.
> +	 */
> +	struct drm_property *color_format_property;
> +
>  	/**
>  	 * @path_blob_ptr:
>  	 *
> @@ -2610,6 +2711,9 @@ bool drm_connector_has_possible_encoder(struct drm_connector *connector,
>  					struct drm_encoder *encoder);
>  const char *drm_get_colorspace_name(enum drm_colorspace colorspace);
>  
> +int drm_connector_attach_color_format_property(struct drm_connector *connector,
> +					       unsigned long supported_color_formats);
> +
>  /**
>   * drm_for_each_connector_iter - connector_list iterator macro
>   * @connector: &struct drm_connector pointer used as cursor
> 
> -- 
> 2.53.0

-- 
Ville Syrjälä
Intel



More information about the Linux-rockchip mailing list