[PATCH v2 0/5] Add Invensense ICM42607

[Andy Shevchenko]

On Thu, Mar 19, 2026 at 01:29:36PM -0500, Chris Morgan wrote:

> Add support for the ICM42607 IMU. This sensor shares the same
> functionality but a different register layout with the existing
> ICM42600.
> 
> This driver should work with the ICM42607 and ICM42607P over both I2C
> and SPI, however only the ICM42607P over I2C could be tested.

Please, make sure each patch is ~750 ±150 LoC, so it's reviewable.
Last patch is unreviewable 2k+ LoC!

-- 
With Best Regards,
Andy Shevchenko