[PATCH v2 3/9] arm64: dts: rockchip: Add missing clock "hclk" for RK3588 eDP1 nodes.

[Damon Ding]

The RK3588 eDP controller needs the video datapath clock "hclk" to work
well. Previously, it works without explicitly adding this clock because
the 'rockchip,vo-grf = <&vo1_grf>' property implicitly enables HCLK_VO1.

Fixes: a481bb0b1ad9 ("arm64: dts: rockchip: Add eDP1 dt node for rk3588")
Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 6e5a58428bba..71fc4fc9e556 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -285,8 +285,8 @@ hdmi1_out: port at 1 {
 	edp1: edp at fded0000 {
 		compatible = "rockchip,rk3588-edp";
 		reg = <0x0 0xfded0000 0x0 0x1000>;
-		clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>;
-		clock-names = "dp", "pclk";
+		clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>, <&cru HCLK_VO1>;
+		clock-names = "dp", "pclk", "hclk";
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
 		phys = <&hdptxphy1>;
 		phy-names = "dp";
-- 
2.34.1