[PATCH 11/17] spi: st: Use helper function devm_clk_get_enabled()

[Pei Xiao]

devm_clk_get() and clk_prepare_enable() can now be replaced by
devm_clk_get_enabled() when driver enables the clocks. Moreover, it is no
longer necessary to unprepare and disable the clocks explicitly.
Simplify code.

Signed-off-by: Pei Xiao <xiaopei01 at kylinos.cn>
---
 drivers/spi/spi-st-ssc4.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
index b173ef70d77e..e7237082abbc 100644
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -293,24 +293,20 @@ static int spi_st_probe(struct platform_device *pdev)
 	host->use_gpio_descriptors	= true;
 	spi_st				= spi_controller_get_devdata(host);
 
-	spi_st->clk = devm_clk_get(&pdev->dev, "ssc");
+	spi_st->clk = devm_clk_get_enabled(&pdev->dev, "ssc");
 	if (IS_ERR(spi_st->clk)) {
 		dev_err(&pdev->dev, "Unable to request clock\n");
 		ret = PTR_ERR(spi_st->clk);
 		goto put_host;
 	}
 
-	ret = clk_prepare_enable(spi_st->clk);
-	if (ret)
-		goto put_host;
-
 	init_completion(&spi_st->done);
 
 	/* Get resources */
 	spi_st->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(spi_st->base)) {
 		ret = PTR_ERR(spi_st->base);
-		goto clk_disable;
+		goto put_host;
 	}
 
 	/* Disable I2C and Reset SSC */
@@ -333,14 +329,14 @@ static int spi_st_probe(struct platform_device *pdev)
 	if (!irq) {
 		dev_err(&pdev->dev, "IRQ missing or invalid\n");
 		ret = -EINVAL;
-		goto clk_disable;
+		goto put_host;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, spi_st_irq, 0,
 			       pdev->name, spi_st);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq %d\n", irq);
-		goto clk_disable;
+		goto put_host;
 	}
 
 	/* by default the device is on */
@@ -359,8 +355,6 @@ static int spi_st_probe(struct platform_device *pdev)
 
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
-clk_disable:
-	clk_disable_unprepare(spi_st->clk);
 put_host:
 	spi_controller_put(host);
 	return ret;
-- 
2.25.1